Dorset · England
Bath re-enamelling & resurfacing in Wincombe, Dorset
Full bath re-enamelling and resurfacing at your home in Wincombe, with a one-year guarantee on every repair.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Lots of chips and rust spots
How we handle bath re-enamelling in Wincombe
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. If you’re dealing with a roll-top that’s seen better days and staining under the taps and around the waste, we can help, on Victorian roll-tops, acrylic baths and pressed steel baths alike.
The work is covered for a year after we finish. If anything isn’t right, ring us and we will come back.
- Where
- Wincombe (SP7)
- Area hub
- Dorset
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Wincombe and nearby
Wincombe is about 11 miles north of Blandford Forum, in Dorset. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Wincombe is one of 462 places in Dorset we cover.
Our technicians cover all of SP7 and the streets around it. We also cover the places around Wincombe: Donhead St Mary (1 mile east), Gutch Common (1 mile north), Lillies Green (1 mile south-east), Lower Coombe (1 mile south-east) and Milkwell (1 mile south-east). Further out, we also cover Blandford Forum (11 miles south), Gillingham (6 miles west), Peacemarsh (6 miles west), Sturminster Newton (9 miles south-west), Milborne Port (14 miles west) and Stalbridge (11 miles south-west).
Local landmarks in Wincombe
In Wincombe, that means homes near Ludwell Community Primary School, Church of St Mary and Shaftesbury School and the streets around them. The nearest railway station is Tisbury station, about 4 miles north-east of the centre. Other landmarks nearby include Gold Hill Museum (2.5 miles south-west) and Old Wardour Castle (2.7 miles north-east). For a walk, there’s Breeze Hill.
How it works
There is not much you need to do on the day. Show us the job, point us to the room, and we will take it from there. Most visits take a full day.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Point us to the nearest place to park
- Let us know about parking or access
- Plan for the room to be out of bounds to pets and children
How to get a price
For a price in Wincombe, pictures are the quickest way: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Related advice
DIY kit or professional repair?
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
Repair or replace in Wincombe?
A replacement often means several trades over several days. Resurfacing takes one technician and typically a day. Prices start from £350. There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why book with us
- CHAS, Constructionline and SafeContractor accredited
- No extra charge for your area
- Nothing taken out or refitted
- Most jobs done in one visit
See our full price list and resurfacing vs replacement cost guide.
Your questions about bath re-enamelling in Wincombe
Is it messy?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Can you quote from photos?
Typically, yes. A close-up and a wider photo are enough to give a fixed quote.
Is there a call-out fee?
We don’t add a call-out fee. The fixed price covers the visit and the work.
Is there a guarantee?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Does re-enamelling smell?
Some odour is normal while we spray, which is why we ventilate the bathroom. It clears as the finish cures.
How much does bath re-enamelling cost in Wincombe?
Prices start from £350. The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before booking.
How long will the bath be out of use?
One day for most baths, ready the following day. We will confirm timings when we quote.
Do you come to Wincombe?
Yes, we do. Technicians travel to Wincombe from across the region, and the price is the same as everywhere else.
Also near Wincombe
Other services in Wincombe
What a repair cannot fix
We will not take on work that will not last, so here’s what a repair can’t put right:
- Holes rusted through the metal
- Problems we cannot see until an old finish comes off
- Plumbing leaks, which need a plumber
Send us photos and we’ll tell you honestly before you book.
Materials we repair
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
What we’re called out for in Wincombe
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
Contact us if you’ve noticed:
- Enamel that is lost its shine and feels rough
- An original cast iron bath that needs restoring
- A bath in a colour that no longer suits
- Wear marks under the taps
What to look for in a quote
- Whether the colour is mixed to match
- Aftercare advice
- How long the guarantee is and what it covers
- How the room is protected while they work
Repairs by material
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
For landlords and businesses
Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
How to care for the repair
Looking after the surface is easy:
- A quick wipe after use keeps limescale away
- Stick to gentle, non-abrasive cleaners
- Never use suction bath mats
- Store bottles off the bath
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Fix dripping taps quickly.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
About our accreditations · Every repair comes with a one-year guarantee.
