Hampshire · England

Bath Re-enamelling for Lower Slackstead homes

Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Lower Slackstead. Free, fixed quotes from your photos.

  • Resurfacing from £350
  • A coating lifting around the plughole
  • Wear marks under the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling for Lower Slackstead homes

Aftercare tips

Nothing complicated is needed:

  • Keep toiletries on a shelf rather than in the bath
  • A quick wipe after use keeps limescale away
  • Leave the bath for the full curing time before using it
  • A dripping tap should be fixed promptly

The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.

Do not try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.

Bath re-enamelling at your home in Lower Slackstead

After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, so we don’t cut corners on it. Common call-outs are for a coating lifting around the plughole and staining under the taps and around the waste, in acrylic baths, Victorian roll-tops and cast iron baths.

Every job is backed for twelve months in Lower Slackstead and everywhere else. We return to put right any problem with the work.

Basin with yellowed glaze resurfaced to a clean white finish
Area
Lower Slackstead (SO51)
County
Hampshire
Warranty
12 months on all our work
Quotes
From £350. Fixed and free, based on photos
Phone
0345 017 0787
Updated
23 October 2026

When a repair is not the answer

Some problems need a builder, plumber or fitter rather than us:

  • A bath split right through the body
  • Anything hidden under an old coating, until we remove it
  • Leaks from fittings rather than the bath

Send us photos and we will tell you honestly.

Surfaces we repair

  • Acrylic baths
  • Pressed steel baths
  • Victorian roll-tops
  • Basins & shower trays
  • Cast iron baths

Repairs by material

Cast iron

Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.

Pressed steel

Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.

Repairing versus replacing in Lower Slackstead

If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Tiles, panels and taps stay put. Resurfacing from £350, with every job priced individually. A repair is priced on what needs doing, not your postcode. The full price is agreed before booking, with no extras added later.

Why us?

  • Nothing taken out or refitted
  • Fixed prices from your pictures
  • Colour mixed on the day to match
  • Work done at your home or business

See our pricing and resurfacing vs replacement cost guide.

FAQs for Lower Slackstead

Do I have to be there?

Someone needs to let us in and show us the job. After that, you can carry on with your day.

How much does bath re-enamelling cost in Lower Slackstead?

Resurfacing from £350. Every job gets a fixed quote based on pictures of the damage. Send a close-up of the damage and a wider photo and your postcode.

Can you do more than one item on the same visit?

Of course, and it usually saves money. Just add the extra items to your photos and we’ll quote them together.

Will the price change on the day?

If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.

Can you resurface a pink bath in white?

Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.

Can a failed resurfacing be redone?

Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.

How long does re-enamelling take?

Most baths are done in a day and can be used the day after. We will confirm timings when we quote.

Do you charge for travel?

Travel is included in the price, with the same prices everywhere we work.

How the visit works

We begin by going over the job with you, so there are no surprises. Next, we cover and mask everything nearby and the work begins. It normally takes a full day, and we’ll tell you if anything changes.

  1. First we look the bath over and confirm the finish.
  2. Everything around the bath is masked and covered.
  3. The bath is degreased, repaired and keyed.
  4. We apply the primer and then the finish coats.
  5. We remove the masking, tidy up and give you the curing time.

Getting ready for the visit

  • Tell us about parking, stairs or access
  • Mention any earlier repairs or resurfacing
  • Point us to the nearest place to park

Ask for a price

You don’t need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.

Send photos for a quote

Advice

What we’re called out for in Lower Slackstead

Enamel wears gradually. Abrasive cleaners, limescale and years of use wear the gloss away, starting where water runs and sits.

Most people contact us when they notice one of these:

  • Enamel that’s lost its shine and feels rough
  • An old resurfacing that’s failing
  • Wear marks under the taps
  • Brown or grey marks that do not clean off

Before booking anyone

  • Is the price fixed, and does it include VAT?
  • How soon you can use it again
  • Whether a trained technician does the job
  • What happens if they find more damage

Choosing a repair company

About Lower Slackstead

Lower Slackstead is about 3 miles north-east of Romsey, in Hampshire. Whether you’re in the middle of Lower Slackstead or on the outskirts, the service is the same: a fixed price, a tidy visit and a guarantee. Lower Slackstead is one of 683 towns and villages in Hampshire we cover. Our jobs stretch from Lower Slackstead to London (67 miles away).

Every address in SO51 is covered. We also cover the places around Lower Slackstead: Knapp (1 mile south-east), Braishfield (1 mile west), Ampfield (1 mile south), Gosport (2 miles south) and Crampmoor (2 miles south-west). We also work in nearby towns such as Winchester (6 miles north-east), Eastleigh (6 miles south-east), Andover (13 miles north), Totton (8 miles south), Chandler's Ford (4 miles south-east) and Hedge End (10 miles south-east).

Landmarks near Lower Slackstead

Our clients here include homes close to Church of All Saints and the streets around them. Lower Slackstead’s nearest station is Romsey station, roughly 3.3 miles south-west of the centre. A little further out are King Johns House (3.7 miles south-west) and Romsey Community Hospital (3 miles south-west). Open spaces near Lower Slackstead include Emer Bog and Baddesley Common.

Map of Lower Slackstead © OpenStreetMap contributors

For landlords and businesses

We work for landlords, letting agents and housing providers in Lower Slackstead as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.

For developers and builders, we fix damage before handover. We can visit several plots in one trip to keep costs down.

DIY repairs versus a professional job

For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.