East Sussex · England
Bath re-enamelling & resurfacing in Lullington, East Sussex
Bath re-enamelling for Lullington, without a refit. Send us photos for a fixed price, then we come to you.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Chips and rust in more than one place
What affects the price in Lullington
Resurfacing from £350. A fixed quote means you know the cost before you book. We take into account:
- Whether it’s a chip, crack, burn or wear
- How many items we do on one visit
- Whether old repairs or coatings need taking off
- What the surface is made of
There are no surprise extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Getting a price from pictures
A couple of clear pictures is all it takes. It helps if you send:
- What it’s made of, if you know
- Something in shot to show the size
- A wider photo showing the whole bath
- Natural light rather than flash
We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
How we handle bath re-enamelling in Lullington
Many of the baths we re-enamel are period roll-tops, which are heavy, hard to move and costly to replace. Doing them in place keeps an original feature. Typical jobs include lots of chips and rust spots and a peeling or bubbling previous coating, in cast iron baths, Victorian roll-tops and basins & shower trays.
Older homes around Lullington may have baths that have been in place for decades. If the bath is sound, bath re-enamelling gives it a new lease of life.
We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.
- Location
- Lullington (BN26)
- Area hub
- East Sussex
- Guarantee
- One year on every repair
- Price
- From £350. Fixed, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Places near Lullington
Other services in Lullington
Aftercare tips
A little care keeps the finish looking good. We recommend:
- Don’t leave a chip unrepaired
- Do not let dyes or oils sit on the finish
- Don’t leave bottles, razors or sponges standing on the surface
- Keep suction mats out of the bath
Rinse the bath and wipe it over after use, particularly where water is hard, to stop limescale building up.
If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
Your questions about bath re-enamelling in Lullington
Do you work for landlords with property near Berwick (Sussex) station?
Yes. We fix baths between tenancies for landlords and letting agents, and we can quote for several properties together.
Will you travel to Lullington?
We do: small places like Lullington are covered as standard. Just mention any tricky access.
Is there a guarantee?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
Will the price change on the day?
If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.
What areas do you cover?
Everywhere in the UK, Lullington included. Travel is included in the price.
I rent my home. Can I book you?
Yes. Check with your landlord; we can send the quote to them too.
Will the new finish last?
Care for it and it lasts. Gentle cleaning, no suction mats.
Do you need to take the bath out?
Not at all. Everything is done in your bathroom, with the room protected and ventilated.
Honest limits
A repair is not right for every job, including:
- A poorly supported acrylic bath, until it’s firmed up
- A bath split right through the body
- Anything hidden under an old coating, until we remove it
Not sure? Send photos and we’ll give you a straight answer.
Materials we repair
- Basins & shower trays
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
The process
When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job generally takes a full day. We tidy up before we leave and let you know when you can use it again. Somewhere like Lullington needs a little journey planning: let us know about lanes, gates and parking. We bring everything needed for the bath re-enamelling, so there’s no second trip.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Mention any parking restrictions or tricky access
- Tell us about any previous repairs or coatings
- Clear the area around the damage
How to get a price
Email us photos of the damage and a wider shot of the whole item, and tell us you’re in Lullington, and we’ll come back with a fixed quote.
Read more
Repair or replace in Lullington?
Replacement only makes sense in a few cases: if the bath is cracked through, if you want a different size or shape, or if you’re refitting the whole room anyway. In most other cases, resurfacing is the better choice. Replacement in Lullington means trades, travel and waste removal, while a repair is a single visit.
Our bath re-enamelling starts from £350. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Why book with us
- Usually one visit, start to finish
- Colours mixed by hand to suit your surface
- Nothing taken out or refitted
- Same prices wherever you are
Take a look at our Pricing And Guide to resurfacing and replacement costs.
Signs you need bath re-enamelling in Lullington
Previous coatings can fail too, peeling around the waste or bubbling. We strip what’s failing and start again.
The most common problems we’re called about are:
- A peeling or bubbling previous coating
- A roll-top that is seen better days
- A dull, rough surface that will not come clean
- Brown or grey marks that do not clean off
For older houses around Lullington, near landmarks such as Church of St. Andrew, it may still have its original cast iron bath, which is well worth repairing or re-enamelling rather than replacing.
Before booking anyone
- A fixed quote, and whether VAT is included
- What happens if the damage is worse than the photos show
- What prep work is covered
- Whether a trained technician does the job
Lullington: what to know about bath re-enamelling
Landlords with property near Berwick (Sussex) station (about 2.6 miles north) use us between tenancies, so baths are repaired rather than replaced.
Lullington is about 3 miles north-east of Seaford, in East Sussex. Book a date that suits you, and you will know when to expect us, so you’re not left waiting in all day. Our technicians cover all 289 towns and villages across East Sussex. Our nearest city page is London, about 49 miles away.
We cover every part of BN26 for bath re-enamelling and the streets around it. If you’re just outside Lullington, we cover Dukes Green (1 mile south-west), Alfriston (1 mile north-west), Winton (1 mile north), Milton Street (1 mile north-east) and Wilmington (2 miles north-east). We also work in nearby towns such as Eastbourne (6 miles east), Bexhill-on-Sea (14 miles east), Seaford (3 miles south-west), Lewes (9 miles north-west), Hailsham (6 miles north-east) and Uckfield (12 miles north).
What’s near Lullington
Around Lullington, we work in homes near Dean's Place Hotel and the streets around them. The closest station to Lullington is Berwick (Sussex) station, about 2.6 miles north of the centre. Well-known places in the area include Old Forge Museum (Alfriston) (0.5 miles north-west) and Arlington Castle (0.9 miles north). Open spaces near Lullington include Combe Hill.
Different materials, different repairs
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
If you do try a kit, read the instructions carefully, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
About our accreditations · Every repair comes with a one-year guarantee.
