East Sussex · England
Bath Re-enamelling in Milton Street
Our technicians come to Milton Street for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- Stains that will not shift
- Chips and rust in more than one place
About our bath re-enamelling in Milton Street
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. We work on basins & shower trays, Victorian roll-tops and acrylic baths, and common reasons people contact us are chips and rust in more than one place and stains that won’t shift.
You are covered after we leave: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Location
- Milton Street (BN26)
- County
- East Sussex
- Cover
- One year on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What bath re-enamelling costs
Prices start from £350. There is no charge for travel to Milton Street. The price comes down to:
- Access to the area
- Unusual colours or finishes
- What the surface is made of
- Previous DIY repairs that have to come out
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
How to get a fixed price
When you take your photos, a few simple things make all the difference:
- Your postcode, so we can check dates
- Something in shot to show the size
- Daylight if possible, and no flash reflection
- A wider photo showing the whole bath
Send us photos of the damage and a wider shot of the whole item, and tell us you’re in Milton Street, and we’ll reply with a fixed quote.
Also near Milton Street
Other services in Milton Street
Repairing versus replacing in Milton Street
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing generally wins. Resurfacing from £350, with every job priced individually. The price depends on how much damage there is and what kind, the material and how many items we do on one visit. You get a fixed quote from your photos, so there are no surprises on the day.
Why Milton Street customers choose us
- No need to remove anything
- CHAS, Constructionline and SafeContractor accredited
- A year’s guarantee on all work
- Most jobs done in one visit
See our prices page or bath cost comparison.
Common questions in Milton Street
Does the bath have to be removed?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Do you charge for travel?
Travel is included in the price, with the same prices everywhere we work.
Can you fix a peeling bath coating?
Yes. Removing the old finish takes extra time, which we include in the price.
Can tenants book a repair?
Yes. Ask your landlord first, and we can send them the quote if that helps.
How do I get a price for bath re-enamelling in Milton Street?
Prices start from £350. The exact price depends on the damage, so we quote from pictures. You’ll get a fixed figure before you book.
Will it make a mess?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
What information do you need?
Use the quote form or ring 0345 017 0787.
The process
We begin by going over the job with you, so you know exactly what we are doing. After that, protection goes down around the work area and we start. It normally takes the best part of a day, and we will tell you if anything changes.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can normally be used the following day.
How to prepare
- Tell us about any previous repairs or coatings
- Keep a parking space free if you can
- Keep pets and children out of the room while we work
Ask for a price
A quote takes minutes to ask for: photograph the damage, then the whole bath, add your postcode and send them over. What comes back is a fixed quote, not a guess.
Read more
When a repair is not the answer
A few problems are outside what a surface repair can do:
- A cast iron or steel bath that’s cracked right through
- Steel that has corroded right through
- Problems we can’t see until an old finish comes off
Not sure? Send photos and we’ll give you a straight answer before booking.
Surfaces we repair
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
What we are called out for in Milton Street
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
These are the problems we are asked about most:
- An outdated colour you’d like to change
- A period or roll-top bath worth keeping
- Chips and rust in more than one place
- Thin, worn enamel in places
Before booking anyone
- What preparation is included
- A fixed quote, and whether VAT is included
- How the colour is matched
- How the room is protected while they work
What your bath is made of matters
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Can I fix it myself?
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
Our work in Milton Street
Milton Street is about 4 miles north-east of Seaford, in East Sussex. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Milton Street is one of 289 towns and villages in East Sussex we cover. Our jobs stretch from Milton Street to London (49 miles away).
Postcode districts we cover here: BN26. Neighbouring places we cover include Wilmington (1 mile north-east), Winton (1 mile west), Alfriston (1 mile south-west), Lullington (1 mile south-west) and Dukes Green (1 mile south-west). Larger places within reach include Eastbourne (5 miles south-east), Bexhill-on-Sea (13 miles east), Seaford (4 miles south-west), Lewes (9 miles north-west), Hailsham (5 miles north-east) and Uckfield (11 miles north).
Around Milton Street
Our customers here include homes close to Alfriston School, St Mary and St Peter's Church and The Sussex Ox pub. Milton Street’s nearest station is Berwick (Sussex) station, about 1.8 miles north of the centre. A little further out are Eastbourne District General Hospital (4.4 miles south-east) and Burlough Castle (within half a mile north-west). Green spaces nearby include Combe Hill.
Work for landlords and builders
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
About our accreditations · Every repair comes with a one-year guarantee.
