Hampshire · England
Bath Re-enamelling for Lyndhurst homes
Full bath re-enamelling and resurfacing at your home in Lyndhurst, with a one-year guarantee on every repair.
- Resurfacing from £350
- Several chips and rust patches
- Brown or grey marks that do not clean off
Keeping it looking good
So the finish stays in good condition:
- Leave the bath for the full curing time before using it
- A quick wipe after use keeps limescale away
- Avoid suction-cup mats
- Rinse off hair dye, oils and bath bombs straight away
Rinse the bath and wipe it over after use, particularly where water is hard, to stop limescale building up.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Bath re-enamelling at your home in Lyndhurst
We re-enamel a lot of period and roll-top baths, which would be difficult and expensive to replace. Doing them in place keeps an original feature. We’re often asked to fix enamel that’s lost its shine and feels rough and staining under the taps and around the waste, in cast iron baths, acrylic baths and Victorian roll-tops.
The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right.
- Where
- Lyndhurst (SO43)
- Area hub
- Hampshire
- Cover
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Signs you need bath re-enamelling in Lyndhurst
Often the bath has just had decades of use. The body of the bath is normally perfectly sound.
The most common problems we are called about are:
- Wear marks under the taps
- A roll-top that’s seen better days
- Lots of chips and rust spots
- A bath in a colour that no longer suits
Before booking anyone
- Who turns up on the day
- If travel is included in the price
- How changes to the job are handled
- Is the price fixed, and does it include VAT?
Also near Lyndhurst
What else we do in Lyndhurst
What your bath is made of matters
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Repair or replace in Lyndhurst?
Getting a cast iron bath out is hard work: they’re heavy, often need breaking up, and a new one isn’t cheap. Re-enamelling avoids all of it. Prices start from £350. Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
Why Lyndhurst clients choose us
- One visit for most repairs
- We will tell you if it’s not worth repairing
- Technicians who travel to you, UK-wide
- Free fixed quotes from pictures
Read our pricing and resurfacing vs replacement cost guide.
What bath re-enamelling costs
Prices start from £350. There are no hourly rates or hidden extras. The price is based on:
- Previous DIY repairs that have to come out
- Access to the area
- The material and finish
- Whether we combine several jobs
We don’t add extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Quotes from your pictures
Before you send pictures, a few simple things make all the difference:
- A coin beside the damage so we can judge size
- Any earlier repairs or coatings
- The material, if you know it
- The postcode, so we can plan the visit
To get a price, send a couple of photos through our quote form or ring us. We will tell you honestly whether it can be repaired.
Honest limits
Some jobs are not right for a repair, for example:
- A bath split right through the body
- Holes rusted through the metal
- An acrylic bath that flexes badly underfoot
Not sure? Send pictures and we’ll give you a straight answer before booking.
Materials we work on in Lyndhurst
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
How it works
We agree an arrival time beforehand, so you know when to expect us. On site, it takes most of the day for most jobs. We leave the room clean and you will know when it can be used.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Make sure the room can be ventilated
- Ensure the area is dry
- Point us to the nearest place to park
Ask for a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. You will get a fixed quote, not an estimate.
Advice
About Lyndhurst
Lyndhurst is about 4 miles south-west of Totton, in Hampshire. We travel to homes and businesses in Lyndhurst and the surrounding area, so there’s no workshop to go to. Lyndhurst is one of 683 places in Hampshire where we work. Our jobs stretch from Lyndhurst to London (about 77 miles away).
Jobs in SO43 work the same way as everywhere else we cover. You will find streets such as High Street, King's Close and Empress Road, all of which we cover. Nearby, we also work in Emery Down (1 mile west), Ashurst (3 miles north-east), Balmerlawn (3 miles south), Colbury (4 miles north-east) and Brockenhurst (4 miles south). Larger places within reach include Eastleigh (12 miles north-east), Totton (4 miles north-east), Chandler's Ford (11 miles north-east), Hedge End (12 miles east), Lymington (8 miles south) and Romsey (9 miles north-east).
Near you in Lyndhurst
Locally, our jobs take us to homes close to St Michael and All Angels CofE Infant School, Church of Our Lady and St Edward and Fox And Hounds Public House. The nearest railway station is Ashurst New Forest station, about 2.4 miles north-east. Nearby you’ll also find Ashurst Hospital (2.6 miles north-east) and National Dairy Museum (3.4 miles north-east). Green spaces nearby include Copythorne Common.
Common questions in Lyndhurst
Someone resurfaced my bath and it’s peeling. Can you help?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Will the bath be moved?
No, it stays where it is. Everything is done in your bathroom, with the room protected and ventilated.
Can you make a coloured bath white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
Do you resurface freestanding baths?
Yes. Inside and out.
Do you charge for travel?
We don’t add a call-out fee. Your fixed price includes everything.
Will there be a smell?
Some materials have a smell while they’re applied, which is why we ventilate. It clears as the materials cure.
Is the work guaranteed?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Will the new finish last?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Work for landlords and builders
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We will fit around changeovers where we can.
We’re used to working with agents and managing companies. Send the address, pictures and access details and we’ll handle the rest.
About our accreditations · Every repair comes with a one-year guarantee.
