Middlesbrough · England
Bath re-enamelling & resurfacing in Maltby, Middlesbrough
Fixed-price bath re-enamelling in Maltby and the surrounding area, usually in one visit.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- Staining under the taps and around the waste
Materials and what they mean for the repair
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
How we handle bath re-enamelling in Maltby
Most baths are re-enamelled in a day, with the bath ready to use the following day. Taps, tiles, panels and plumbing all stay in place. If you are dealing with worn patches where water runs and sits and a bath that stays dull however much you clean it, we can help, whatever the material.
We stand behind the work with a one-year guarantee.
- Location
- Maltby (TS8)
- County
- Middlesbrough
- Guarantee
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Landlord and trade work in Maltby
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Our work in Maltby
Maltby is about 1 mile east of Ingleby Barwick, in Middlesbrough. Book a date that suits you, and we’ll give you an arrival time in advance, so you’re not left waiting in all day. Maltby is one of 33 towns and villages in Middlesbrough we cover. We work right across the region, from Maltby to Newcastle upon Tyne (36 miles away).
Every address in TS8 is covered. Jobs here include addresses on High Lane, Roger Lane and Pennyman Green. Close by, we cover Thornton (1 mile east), Stainton (1 mile north-east), Brookfield (2 miles north-east), Hemlington (2 miles north-east) and Thornaby-on-Tees (2 miles north). Within a short drive, we also cover Middlesbrough (4 miles north-east), Park End (4 miles north-east), Berwick Hills (4 miles north-east), Whale Hill (7 miles north-east), Normanby (6 miles north-east) and Marton Grove (4 miles north-east).
Near you in Maltby
Typical jobs here are in homes near The Stainton Public House, Ingleby Manor Free School & Sixth Form and Church of St. Peter and St. Paul and the streets around them. Maltby’s nearest station is Eaglescliffe station, roughly 3 miles west. Well-known places in the area include Carter Bequest Primary Care Hospital (3.1 miles north-east) and Yarm Castle (3 miles west).
Nearby places to Maltby
Also in Maltby
How the visit works
When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job usually takes the best part of a day. We clean up when we are done and tell you when it’s ready to use.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Move bottles, mats and clutter away from the area
- Make sure the area is dry
- Plan for the room to be out of bounds to pets and children
How to get a price
There is no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
Related advice
When we’d advise against a repair
We will not take on work that will not last, so these are the limits:
- Steel that has corroded right through
- A metal bath with a through crack
- Plumbing leaks, which need a plumber
Send us photos and we’ll tell you honestly.
Surfaces we repair
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
Maltby: your questions answered
What happens once I’ve sent pictures?
We check the damage, the material and your postcode, then reply with a quote.
Can landlords book you?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses across Middlesbrough.
Can a failed resurfacing be redone?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Which areas do you work in?
Everywhere in the UK, Maltby included. There’s no extra charge for travel.
Can you resurface a pink bath in white?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Can I get a quote without a visit?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
Will the new finish last?
Look after it and it lasts. Gentle cleaning, no suction mats.
How do I get a price for bath re-enamelling in Maltby?
Prices start from £350. We give a fixed price from your photos. Send a close-up and a picture of the whole item and your postcode.
Why repair rather than replace?
There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you are refitting the whole room anyway. In most other cases, resurfacing is the better choice. Our bath re-enamelling starts from £350. We charge the same wherever you are, so there’s no premium for Maltby. The job itself decides the price: the material, the amount of damage and how many items.
What you get with us
- Straight answers about what a repair can do
- Fixed prices from your photos
- Normally one visit, start to finish
- Rooms protected and left tidy
Read our full price list or resurfacing vs replacement cost guide.
Can I fix it myself?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
How to care for the repair
To keep it looking its best:
- Keep suction mats out of the bath
- Rinse off hair dye, oils and bath bombs straight away
- Use washing-up liquid and a soft cloth
- Fix dripping taps quickly
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
How we price bath re-enamelling
Resurfacing from £350. We price every job individually. The main factors are:
- What kind of damage it is
- Any earlier repairs that need removing first
- Doing more than one item at once
- The size and number of damaged areas
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Send photos for a quote
When you take your photos, a few simple things make all the difference:
- A coin or ruler next to the damage for scale
- Natural light rather than flash
- Details of any past repairs
- A close-up of the damage, in focus
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can price the job.
About our accreditations · Every repair comes with a one-year guarantee.
