Middlesbrough · England
Bath & shower resealing (mastic) in Maltby, Middlesbrough
Bath resealing in and around Maltby: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Black spots in the silicone
- Silicone smeared on tiles
- Old sealant that looks dirty
Bath resealing in Maltby, done in place
We reseal baths with them filled with water, so the joint is at its widest, so the seal does not tear when the bath is first used. Whether it’s leaks at the edges and gaps in the seal, we can help.
Every job is backed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.
- Location
- Maltby (TS8)
- Region
- Middlesbrough
- Guarantee
- One year on every repair
- Quote
- Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Do you need bath resealing in Maltby?
Black mould is the most common reason people reseal. It grows into the sealant itself, so cleaning only removes the surface.
Customers generally contact us about:
- Mould you cannot clean out
- Discoloured, yellow sealant
- Gaps in the seal
- Unsealed corners
What to look for in a quote
- How the colour is matched
- How your room will be protected
- Whether there are any call-out or travel charges
- How long the guarantee is and what it covers
Landlord and trade work in Maltby
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip.
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
When we’d advise against a repair
Honesty matters more than a booking, so here’s what a repair can’t fix:
- Rotten walls or floors behind the bath
- Loose tiles, which need refixing first
- Very wide gaps that need a trim
If in doubt, send photos and we will say what we think before booking.
Materials we repair
- Baths
- Kitchen worktops & sinks
- Shower trays & enclosures
- Basins & vanity units
- Wet rooms
The process
You do not need to empty the room beforehand. We bring everything we need with us, put protection down and get going once we’ve agreed what we are doing. Most jobs take around two hours, and you’re welcome to carry on with your day while we work.
- First we strip out every bit of the old mastic.
- The joint is cleaned and any mould treated.
- The joint is dried thoroughly.
- For a bath, we fill it with water first so the joint is at its widest.
- We apply new mould-resistant silicone and tool it to a neat finish, including around the taps.
How to prepare
- Point us to the nearest place to park
- Ensure the room can be ventilated
- Keep pets and children out of the room while we work
Ask for a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath or shower, include your postcode and send them over. You’ll get a fixed price, not an estimate.
Advice
Materials and what they mean for the repair
Shower trays
We put weight on a tray before sealing it, for the same reason.
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.
Why reseal now?
Resealing costs very little, and it protects everything around the bath. Failed sealant can lead to water damage that is much more expensive. There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why us?
- No extra charge for your area
- Rooms protected and left tidy
- CHAS and Constructionline accredited
- Straight answers about what a repair can do
Read our prices page.
About Maltby
Maltby is about 1 mile east of Ingleby Barwick, in Middlesbrough. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. We cover 33 places in Middlesbrough, from the larger towns to small villages. Our jobs stretch from Maltby to Newcastle upon Tyne (36 miles away).
Here we cover the TS8 postcode area. From High Lane, Roger Lane and Pennyman Green or a nearby road, a technician can come to you. Other places close to Maltby include Thornton (1 mile east), Stainton (1 mile north-east), Brookfield (2 miles north-east), Hemlington (2 miles north-east) and Thornaby-on-Tees (2 miles north). Within a short drive, we also cover Middlesbrough (4 miles north-east), Park End (4 miles north-east), Berwick Hills (4 miles north-east), Whale Hill (7 miles north-east), Normanby (6 miles north-east) and Marton Grove (4 miles north-east).
Landmarks near Maltby
Typical jobs here are in homes near The Stainton Public House, Ingleby Manor Free School & Sixth Form and Church of St. Peter and St. Paul, among other places. The nearest railway station is Eaglescliffe station, roughly 3 miles west. Well-known places in the area include Carter Bequest Primary Care Hospital (3.1 miles north-east) and Yarm Castle (3 miles west).
Looking after it afterwards
Simple care helps the repair last. Our advice:
- Give the seal a regular clean
- Air the room after use
- Keep bottles off the joints
- Use the extractor fan
Leave the sealant to cure for the time we give you, normally about a day.
If you notice damp, stains on the ceiling below or loose tiles, act quickly. It may be more than a reseal, and we’ll say if you need a builder or plumber.
Towns and villages near Maltby
Other services in Maltby
Maltby: your questions answered
Can you quote from pictures?
Typically, yes. Clear photos let us give you a fixed quote without visiting.
Can you repair something that’s been repaired before?
Yes, we often do. Removing the old work can add time, and that’s in the quote.
Can tenants book a repair?
Yes. Ask your landlord first, and we can send them the quote if that helps.
How soon can you come?
Your quote comes with available dates. Tell us if you need it done quickly.
Do you work in Maltby?
Yes. We cover the entire UK and come to Maltby and the rest of Middlesbrough. Send pictures and we will quote, or call 0345 017 0787.
Can I add another job to the visit?
Yes, and it’s frequently cheaper. Send pictures of everything together and we will quote them together.
Is there a call-out fee?
Travel is included in the price, and we charge the same wherever you are.
How do I stop mould in sealant?
Mould needs moisture. Run the fan, dry the joints and the new seal stays cleaner for longer.
What bath resealing costs
We charge the same across the UK, including Maltby. The price reflects:
- How many items we do on one visit
- Any earlier repairs that need removing first
- The material and finish
- How many areas need work
The price reflects the work involved, not your postcode. The full price is agreed before you book, with nothing added on the day.
Quotes from your pictures
Photographing the damage takes a minute, and it saves a visit. Please include:
- Any earlier repairs or coatings
- A clear, close picture of the problem area
- What it’s made of, if you know
- The postcode, so we can plan the visit
We price from pictures so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
About our accreditations · Every repair comes with a one-year guarantee.
