Rotherham · England
Bath re-enamelling & resurfacing in Maltby, Rotherham
Full bath re-enamelling and resurfacing at your home in Maltby, with a one-year guarantee on every repair.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Several chips and rust patches
About Maltby
Maltby is about 6 miles east of Rotherham, in Rotherham. Anywhere in S66, a technician comes to you. Maltby is one of 71 towns and villages in Rotherham we cover. Our jobs stretch from Maltby to Leeds (30 miles away).
Our technicians cover all of the S66 postcode area. Streets in the area include High Street, Millicent Square and School Walk, and we cover them all. Main roads around Maltby include the A631 and A634, which makes travel easy. Neighbouring places we cover include Hooton Levitt (1 mile south-west), Braithwell (1 mile north), Hellaby (2 miles west), Micklebring (2 miles north-west) and Carr (2 miles south-west). Within a short drive, we also cover Rotherham (6 miles west), Rawmarsh (6 miles north-west), Dinnington (4 miles south), Clifton (6 miles west), Swinton (6 miles north-west) and Mexborough (6 miles north-west). Maltby is among the bigger towns we cover in Rotherham.
Landmarks near Maltby
Around Maltby, we work in homes near Maltby Academy, St Bartholomew's Church and Maltby Manor Academy, among other places. The closest station to Maltby is Conisbrough station, about 4.6 miles north of the centre. Further afield, we also cover the area around Tickhill Castle (4 miles east) and St Catherine's Hospital (5.4 miles north-east). Open spaces near Maltby include Denaby Ings.
Bath re-enamelling at your home in Maltby
Re-enamelling is a one-day job for most baths, with the bath ready to use the following day. Nothing is disconnected or removed. If you are dealing with a coloured bath you want in white and an old resurfacing that’s failing, we can help.
Peace of mind is built in: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Area
- Maltby (S66)
- Area hub
- Rotherham
- Guarantee
- One year on every repair
- Price
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Nearby places to Maltby
More services for Maltby
Materials and what they mean for the repair
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
FAQs for Maltby
Can you repair something that is been repaired before?
Yes, regularly. It can add a little time, which we include in the quote.
Is the work guaranteed?
All our work carries our one-year guarantee. We’ll explain what it covers when we quote.
How soon can you come?
We’ll give you dates with your quote. Tell us if you need it done quickly.
Does re-enamelling smell?
Some odour is normal while we spray, which is why we ventilate the bathroom. It fades as the coating cures.
Is it messy?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
What information do you need?
Send pictures through the quote form or call 0345 017 0787, and we’ll take it from there.
Do you charge for travel?
There’s no separate call-out charge. The fixed quote covers the visit and the work.
Do you work in Maltby?
Yes. We cover the entire UK and come to Maltby. Send us pictures for a fixed quote, or call 0345 017 0787.
What happens on the day
It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, and get on with the job, which typically takes the best part of a day. If anything looks different from your pictures, we will talk to you before going ahead.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s normally ready the day after.
Getting ready for the visit
- Mention if the room is upstairs or in a flat
- Tell us about any previous repairs or coatings
- Keep pets and children out of the room while we work
How to get a price
For a price in Maltby, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Related advice
Signs you need bath re-enamelling in Maltby
Older baths often have several problems at once: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
Clients generally contact us about:
- Wear marks under the taps
- A roll-top that’s seen better days
- Several chips and rust patches
- A dull, rough surface that won’t come clean
What your quote should include
- What happens if the damage is worse than the photos show
- Whether cleaning and preparation are in the price
- How your room will be protected
- Aftercare advice
What affects the price in Maltby
Prices start from £350. We don’t charge extra for travel to Maltby. The price comes down to:
- The type of damage
- How hard the colour is to match
- What the surface is made of
- Where the damage is and how we get to it
Every job is a little different, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Send photos for a quote
Good photos mean an accurate price. Here’s what helps:
- Natural light rather than flash
- Something in shot to show the size
- A wider photo showing the entire bath
- Details of any past repairs
A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
Repair or replace: which is better?
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing normally wins. Our bath re-enamelling starts from £350. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
What you get with us
- We leave the room as we found it
- Honest advice, even when it means no job
- Fixed prices from your photos
- No need to remove anything
See our pricing or resurfacing vs replacement cost guide.
Keeping it looking good
Much of the damage we repair could have been avoided. A few tips:
- A quick wipe after use keeps limescale away
- A dripping tap should be fixed promptly
- Do not let dyes or oils sit on the finish
- Use washing-up liquid and a soft cloth
Dry the bath after use if possible, and rinse off any bath products.
If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
Honest limits
A few problems are outside what a surface repair can do:
- Damage hidden under a previous coating, until it’s stripped back
- A bath split right through the body
- Plumbing leaks, which need a plumber
If in doubt, send pictures and we will say what we think before you book.
Surfaces we repair
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Cast iron baths
Landlords, agents and businesses in Maltby
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
We’re used to working with agents and managing companies. Send the address, pictures and access details and we’ll handle the rest.
About our accreditations · Every repair comes with a one-year guarantee.
