Rotherham · England

Non-slip bath & shower coating in Maltby, Rotherham

Non-slip bath coating across Maltby and nearby, done in a single visit in most cases and guaranteed for a year.

  • Safety for older or less mobile people
  • Worn-out textured areas
  • Bath mats that harbour mould or get forgotten
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating near Maltby

Non-slip bath coating at your home in Maltby

It’s popular with homes with older or less mobile people, holiday lets and families. It’s a clear, textured coating, so the bath looks much the same. We work on shower trays, enamelled baths and wet room floors (ask us), and common reasons people get in touch are bath mats that harbour mould or get forgotten and worn-out textured areas.

Your repair is guaranteed for a year, as with every job we do. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.

Before and after: an old shower tray refinished by Surface Doctor
Area
Maltby (S66)
Area hub
Rotherham
Cover
12 months on all our work
Price
Fixed and free, based on pictures
Telephone
0345 017 0787
Page updated
23 October 2026

When we would advise against a repair

We would rather lose a job than do one that won’t last, so these are the limits:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us pictures and we’ll tell you honestly before booking.

Materials we work on in Maltby

  • Enamelled baths
  • Wet room floors (ask us)
  • Acrylic baths
  • Shower trays
  • Resurfaced baths

Signs you need non-slip bath coating in Maltby

Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.

Keep an eye out for these signs:

  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten
  • Safety for older or less mobile people
  • Worn-out textured areas

Comparing quotes

  • What happens if they find more damage
  • What preparation is included
  • What protection goes down before work starts
  • The length of the guarantee and what it covers

10 questions to ask before booking

Landlords, agents and businesses in Maltby

Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.

We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which is easier on the people living there.

Repairing versus replacing in Maltby

The alternatives are replacing the bath or tray with a textured one, or a bath mat that needs lifting and cleaning. A coating treats your existing bath or tray. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.

Why choose Surface Doctor in Maltby

  • Repair technicians who travel to you, UK-wide
  • Fixed prices from your photos
  • Everything repaired in place
  • We’ll tell you if it’s not worth repairing

Take a look at our pricing.

DIY repairs versus a professional job

For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.

How it works

It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, then carry out the work, which normally takes a morning or an afternoon. If we find something your photos didn’t show, we will explain it before carrying on.

  1. We clean and degrease the standing area.
  2. The area to be treated is masked out.
  3. We apply the clear textured coating.
  4. The masking comes off to leave a neat edge.
  5. We leave it to cure, generally overnight.

How to prepare

  • Plan for the room to be out of bounds to pets and children
  • Point us to the nearest place to park
  • Move bottles, mats and clutter away from the area

Getting a price

For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.

Get a free quote

Advice

What non-slip bath coating costs

Prices are worked out job by job, from your pictures. The main factors are:

  • How many areas need work
  • Previous DIY repairs that have to come out
  • Whether it’s a chip, crack, burn or wear
  • The colour and finish to match

A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.

Send pictures for a quote

You can normally get a fixed quote without us visiting. To make it quick:

  • Details of any past repairs
  • Daylight if possible, and no flash reflection
  • A coin beside the damage so we can judge size
  • Where you are, by postcode

If you are in Maltby and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

Maltby and the surrounding area

Maltby is about 6 miles east of Rotherham, in Rotherham. We agree a date that works for you, and we’ll give you an arrival time in advance, so there’s no waiting around. Our technicians cover 71 places in Rotherham. You can also see our page for Leeds, about 30 miles away.

Every address in S66 is within our area, from the main roads to the quietest streets. Whether you live on High Street, Millicent Square and School Walk or a nearby road, we can come to you. Being close to the A631 and A634, Maltby is simple for us to get to. We also cover the places around Maltby: Hooton Levitt (1 mile south-west), Braithwell (1 mile north), Hellaby (2 miles west), Micklebring (2 miles north-west) and Carr (2 miles south-west). Further out, we also cover Rotherham (6 miles west), Rawmarsh (6 miles north-west), Dinnington (4 miles south), Clifton (6 miles west), Swinton (6 miles north-west) and Mexborough (6 miles north-west). Maltby is among the bigger towns we cover in Rotherham.

Around Maltby

Around Maltby, we work in homes near Maltby Academy, St Bartholomew's Church and Maltby Manor Academy, among other places. The closest station to Maltby is Conisbrough station, roughly 4.6 miles north. Other landmarks nearby include Tickhill Castle (4 miles east) and St Catherine's Hospital (5.4 miles north-east). For a walk, there is Denaby Ings.

Map of Maltby © OpenStreetMap contributors

Maltby: your questions answered

Do you cover Maltby?

Yes, we do. We send a technician to Maltby for every job, with no extra charge for travel.

Are you accredited?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Can you do more than one item on the same visit?

Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.

What do you need from me?

Use the quote form or ring 0345 017 0787.

Is there a call-out fee?

There is no separate call-out charge. The fixed price covers the visit and the work.

Will you leave a mess?

Dust sheets and masking go down before we start, and we clean up when we’ve finished.

What happens once I’ve sent photos?

We check the damage, the material and your postcode, then reply with a quote.

How much does non-slip bath coating cost in Maltby?

Because every job differs, we price from pictures. You know the full cost before anything is booked.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.