Worcestershire · England
Bath re-enamelling & resurfacing in Malvern Hills, Worcestershire
Bath re-enamelling in and around Malvern Hills: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Enamel that is lost its shine and feels rough
- Stains that won’t shift
Landlord and trade work in Malvern Hills
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
We regularly work with letting and managing agents. Send the address, pictures and access details and we’ll handle the rest.
Bath re-enamelling in Malvern Hills, done in place
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. There’s no removal, plumbing or tiling involved. Our technicians work on basins & shower trays, pressed steel baths and Victorian roll-tops, and the jobs we see most are a roll-top that’s seen better days and an outdated colour you’d like to change.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Area
- Malvern Hills (WR15)
- Region
- Worcestershire
- Warranty
- One year on every repair
- Price
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Repair or replace in Malvern Hills?
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Prices start from £350. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.
What you get with us
- We come to you, anywhere in the UK
- Honest advice, even when it means no job
- A fixed quote before booking
- Nothing taken out or refitted
See our full price list or resurfacing vs replacement cost guide.
Keeping it looking good
Aftercare is simple:
- Never use suction bath mats
- Repair dripping taps early
- Dry the bath after use to stop limescale
- Respect the curing time we give you
Stick to mild, non-abrasive cleaners, don’t use suction bath mats, and don’t leave bottles or razors standing on the surface.
On a worn bath, rust spots keep spreading and make the job bigger. Resurfacing before they spread keeps it simpler.
Signs you need bath re-enamelling in Malvern Hills
The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
These are the problems we’re asked about most:
- Enamel that is lost its shine and feels rough
- A roll-top that’s seen better days
- A bath in a colour that no longer suits
- An old resurfacing that’s failing
Questions to ask before you book
- What the guarantee covers, and for how long
- Whether the price is fixed and includes VAT
- What happens if they find more damage
- What prep work is covered
FAQs for Malvern Hills
Do you cover the whole of Worcestershire?
We cover the entire UK, including Malvern Hills and the rest of Worcestershire. Send your postcode with your photos and we’ll offer you dates.
Is my repair covered?
All our work carries a one-year guarantee. We’ll explain what it covers when we quote.
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Do you work in Malvern Hills?
Yes. We cover the whole UK and travel to Malvern Hills and the rest of Worcestershire. Send photos and we will quote, or call 0345 017 0787.
Can you redo someone else’s repair?
Yes, we frequently do. It can add a little time, which we include in the quote.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Is it OK to have pets in the house?
We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside if you’d like.
When we’d advise against a repair
We’d rather lose a job than do one that won’t last, so these are the limits:
- A poorly supported acrylic bath, until it’s firmed up
- A metal bath with a through crack
- Problems we can’t see until an old finish comes off
Send us pictures and we’ll tell you honestly before you book.
Materials we repair
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
Malvern Hills and the surrounding area
Malvern Hills is about 13 miles west of Stourport-on-Severn, in Worcestershire. Anywhere in WR15, a technician comes to you. Malvern Hills is one of 376 towns and villages in Worcestershire we cover. Our jobs stretch from Malvern Hills to Birmingham (about 32 miles away).
Every address in WR15 is within our area, from the main roads to the quietest streets. From Blackthorn Road, Birchwood Close and Terrills Lane or anywhere nearby, a technician can come to you. Nearby, we also work in Tenbury Wells (1 mile north-west), Spurtree (1 mile north), Upper Rochford (2 miles east), Newnham Bridge (3 miles east) and Knowle (4 miles north). We also work in nearby towns such as Kidderminster (15 miles east), Stourport-on-Severn (13 miles east), Bewdley (12 miles north-east), Wribbenhall (13 miles east), Hoobrook (15 miles east) and Habberley (14 miles north-east).
Near you in Malvern Hills
Our customers here include homes close to Tenbury CofE Primary School, Tenbury High Ormiston Academy and The Royal Oak Hotel, among other places. Also close by are Church of St Mary (0.5 miles north-west) and Tenbury High Ormiston Academy (less than half a mile west). Well-known places in the area include Little Hereford Manor (2.8 miles west).
What happens on the day
There is not much you need to do on the day. Show us the job, point us to the room, and we will take it from there. The job generally runs to most of the day, including clearing up.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s normally ready the following day.
Getting ready for the visit
- Mention any parking restrictions or tricky access
- Let us know if it has been repaired before
- Keep children and pets away from the room on the day
Getting a price
We price from pictures so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
Read more
Repairs by material
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
Towns and villages near Malvern Hills
Other services in Malvern Hills
DIY repairs versus a professional job
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
About our accreditations · Every repair comes with a one-year guarantee.
