Worcestershire · England

Bath and surface repairs in WR15

Repairs and resurfacing across WR15, from Tenbury Wells, Eardiston and Malvern Hills. Free, fixed quotes from your photos and a one-year guarantee.

How bath repair works in WR15

Small damage on a bath is worth repairing early. Exposed metal on enamelled baths soon rusts, while cracks in acrylic grow each time the bath moves. Repairing it stops the damage getting worse. Our technicians work on cast iron enamel, pressed steel enamel and roll-top & freestanding, and the jobs we see most are rusty patches near the plughole and a chipped rim or side.

Your technician turns up at the time we agreed with you and checks the damage against your pictures first. Dust sheets and masking tape go down before we open a single tin. Most visits take a few hours, and we leave the room as we found it.

  1. We start by cleaning the damage and taking out loose enamel and rust.
  2. Next we fill the damage and sand it smooth and level.
  3. We mix the colour on the day to match your bath’s exact shade.
  4. Finish coats go on, then the repair is polished to blend in.
  5. We leave it to cure; you can usually use the bath the next day.

What you will pay

Repairs from £95, with every job priced individually. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.

Why book with us

  • One-year guarantee on every repair
  • Dust sheets down, tidy finish
  • A fixed quote before booking
  • No need to remove anything

Get a quote

A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them over. What comes back is a fixed price, not a guess.

Around Tenbury Wells

In Tenbury Wells, that means homes near Tenbury High Ormiston Academy, The Royal Oak Hotel and Church of St Mary and the streets around them. Nearby too are Tenbury High Ormiston Academy (less than half a mile south) and Tenbury CofE Primary School (less than half a mile south). A little further out are Little Hereford Manor (2.5 miles west).

How we price bath repair

Prices start from £95. You won’t pay by the hour. The price is based on:

  • How easy the damage is to reach
  • How much damage there is
  • How hard the colour is to match
  • Any earlier repairs that need removing first

Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.

Quotes from your pictures

Phone pictures are fine, there’s no need for anything special. Make sure they show:

  • A wider photo showing the whole bath
  • A close-up of the damage, in focus
  • Good light, ideally daylight, without flash glare
  • A coin beside the damage so we can judge size

If you are in WR15 and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

When a repair is not the answer

A repair isn’t right for every job, including:

  • Leaks from the waste or overflow fittings (a plumber’s job)
  • Cracks in acrylic we cannot reach from underneath
  • Wear across the entire surface, which needs re-enamelling

Materials and what they mean for the repair

Acrylic

Acrylic baths are moulded sheet reinforced underneath. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.

Composite and resin

Composite baths are dense and solid. Chips and scratches can be filled and colour matched, in much the same way.

Aftercare tips

To keep it looking its best:

  • Use a soft cloth and washing-up liquid for everyday cleaning
  • Get any new chip repaired before it rusts
  • Put a towel in the bath if you’re working above it
  • Avoid scourers, wire wool and gritty cream cleaners

Treat the repaired area like the rest of the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.

A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, turning a quick repair into a bigger one.

DIY repairs versus a professional job

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.

WR15 questions

Is there a call-out fee?

We do not add a call-out fee. Your fixed quote includes everything.

What happens once I’ve sent photos?

We look at the photos and reply with a fixed price and some dates. If anything’s unclear, we’ll ask for another photo.

Is a holed acrylic bath repairable?

Usually, yes, if we can reach behind it. We back the hole, fill it and refinish the surface.

Is it safe with children and pets around?

We ask you to keep children and pets out of the room while we work and until it has cured. The rest of the house is unaffected.

Can I add another job to the visit?

Yes, and it’s frequently cheaper. Send pictures of everything together and we will quote them together.

Do you repair coloured baths?

Yes. We mix the colour on the day to match, including pastel and older colours.

Can you fix rust around the plughole?

Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.