Oxfordshire · England
Bath Re-enamelling in Marcham
Our technicians come to Marcham for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- A coloured bath you want in white
What a repair cannot fix
A few problems are outside what a surface repair can do:
- Steel that has corroded right through
- An acrylic bath that flexes badly underfoot
- Damage hidden under a previous coating, until it’s stripped back
If in doubt, send pictures and we will say what we think.
What we work on
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
Bath re-enamelling in Marcham, done in place
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. Our repair technicians work on Victorian roll-tops, acrylic baths and cast iron baths, and common reasons people get in touch are brown or grey marks that don’t clean off and an original cast iron bath that needs restoring.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Marcham (OX13)
- County
- Oxfordshire
- Cover
- 12 months on all our work
- Quotes
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
What we’re called out for in Marcham
Previous coatings can fail too, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
Most people contact us when they notice one of these:
- A period or roll-top bath worth keeping
- A bath that stays dull however much you clean it
- Chips and rust in more than one place
- Thin, worn enamel in places
Comparing quotes
- Whether the colour is mixed to match
- What the guarantee covers, and for how long
- Who will actually do the work
- How the room is protected while they work
Looking after it afterwards
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Keep suction mats out of the bath
- Fix dripping taps quickly
- A quick wipe after use keeps limescale away
- Clean with a soft cloth and mild detergent
Treat the new finish gently at first: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
For landlords and businesses
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
What we do, step by step
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which usually takes a full day. If we find something your pictures didn’t show, we will explain it before carrying on.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the following day, the bath is ready.
Before we arrive
- Keep a parking space free if you can
- Mention if the room is upstairs or in a flat
- Make sure the room can be ventilated
Get a quote
Email us a picture of the damage and one of the entire item, with your OX13 postcode, and we’ll come back with a fixed quote.
Related advice
Marcham questions
Can you redo someone else’s repair?
Yes, we often do. Removing the old work can add time, and that’s in the quote.
Is there any odour?
A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.
Do you cover Marcham?
Yes. We work across the UK and come to Marcham. Send us pictures for a fixed quote, or call 0345 017 0787.
How much does bath re-enamelling cost in Marcham?
Resurfacing from £350. Every job gets a fixed price from your photos. Send a close-up and a picture of the entire item with your OX13 postcode.
I’m a tenant. Can you help?
We are happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.
Does re-enamelling smell?
Yes, while we are applying the finish. Ventilation keeps it down, and it fades as the finish cures.
How long is the bath unusable?
Typically a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
What happens if you find more damage?
If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.
What bath re-enamelling costs
Prices start from £350. Each job gets its own fixed price. This is what makes a difference:
- How hard the colour is to match
- Whether old repairs or coatings need taking off
- The material and finish
- How much damage there is
A repair is priced on what needs doing, not your postcode. The full price is agreed before you book, with no extras added later.
How to get a fixed price
A couple of clear pictures is all it takes. It helps if you send:
- Natural light rather than flash
- Something in shot to show the size
- One picture of the whole bath
- One sharp close-up of the damage
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price.
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Towns and villages near Marcham
What else we do in Marcham
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
Our work in Marcham
Marcham is about 3 miles west of Abingdon-on-Thames, in Oxfordshire. We visit customers in Marcham and nearby villages, so you don’t need to take anything anywhere. Marcham is one of 443 places in Oxfordshire we cover. Our jobs stretch from Marcham to London (55 miles away).
Our visits in OX13 work the same way as everywhere else we cover. We regularly work on streets such as Haines Court, Orchard Way and Elwes Road and the roads around them. If you’re just outside Marcham, we cover Frilford (1 mile west), Frilford Heath (1 mile north-west), Cothill (2 miles north), Tubney (2 miles north-west) and Shippon (2 miles north-east). Within a short drive, we also cover Oxford (7 miles north-east), Didcot (6 miles south-east), Abingdon-on-Thames (3 miles east), Witney (10 miles north-west), Carterton (13 miles north-west) and Wantage (6 miles south-west).
Local landmarks in Marcham
Around Marcham, we work in homes near The Crown Public House, Church of All Saints and Larkmead School, among other places. For rail, the closest station is Radley station, roughly 4.4 miles east of the centre. Well-known places in the area include Abingdon Community Hospital (1.7 miles east) and FitzHarris Castle (2.5 miles east). Open spaces near Marcham include Hitchcopse Pit and Cumnor Hill.
About our accreditations · Every repair comes with a one-year guarantee.
