Lincolnshire · England
Bath re-enamelling & resurfacing in Marton, Lincolnshire
Problem with your bath in Marton? We repair it in place, match it on site and guarantee the work for a year.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- Chips and rust in more than one place
How we handle bath re-enamelling in Marton
If your bath is sound but looks tired, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. We work on cast iron baths, acrylic baths and Victorian roll-tops, and people most frequently call us about several chips and rust patches and a bath in a colour that no longer suits.
We guarantee the work for a year. If something is not right in that time, we come back and put it right.
- Where
- Marton (DN21)
- Region
- Lincolnshire
- Cover
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
What happens on the day
Arrival times are agreed in advance. Once we are there, the work takes a full day for most jobs. The room is left tidy.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
How to prepare
- Tell us about parking, stairs or access
- Avoid using the area for a few hours before we arrive
- Keep a parking space free if you can
Get a quote
Send us a photo of the damage and a wider shot of the whole item, with your DN21 postcode, and we will reply with a fixed price.
Related advice
Towns and villages near Marton
Other services in Marton
Where we work around Marton
Marton is about 5 miles south of Gainsborough, in Lincolnshire. Customers in Marton get the same service as everywhere else we cover: a fixed quote from your pictures, then a visit to do the work. Marton is one of 732 places in Lincolnshire we cover. Our nearest city page is Leeds, about 47 miles away.
Our visits in DN21 are booked in the same way as anywhere else. That includes homes on High Street, Littleborough Lane and Trent Approach. You’ll find Marton on the A156, so it’s easy for us to reach. We also cover the places around Marton: Gate Burton (1 mile north), Brampton (2 miles south), Cottam (2 miles south-west), Knaith (2 miles north) and Torksey (2 miles south). Within a short drive, we also cover Lincoln (11 miles south-east), Gainsborough (5 miles north), North Hykeham (12 miles south-east), Birchwood (10 miles south-east), Hykeham (12 miles south-east) and Ermine (10 miles south-east).
Around Marton
Around Marton, we work in homes near The Marton Academy, Church of St Margaret of Antioch and Ingelby Arms Public House, among other places. For rail, the closest station is Gainsborough Lea Road station, about 4.2 miles north of the centre. Further afield, we also cover the area around Rampton Secure Hospital (4.8 miles south-west).
What a repair cannot fix
A repair is not right for every job, including:
- Acrylic that moves when you stand in it
- A bath split right through the body
- Steel that has corroded right through
If in doubt, send photos and we will say what we think.
Surfaces we repair
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
Signs you need bath re-enamelling in Marton
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. After years of use, the surface becomes porous and stains easily.
Typical reasons for a call-out include:
- An original cast iron bath that needs restoring
- Thin, worn enamel in places
- A coating lifting around the plughole
- A bath in a colour that no longer suits
Questions to ask before booking
- How the colour is matched
- Who will actually do the work
- What aftercare is recommended
- When it can be used again
Repair or replace in Marton?
A refit takes several trades and several days. Re-enamelling takes one technician and typically one day, with the bath ready the following day. Our bath re-enamelling starts from £350. We charge the same wherever you are, so there’s no premium for Marton. What changes the price is the job itself: the material, the amount of damage and how many items.
Why book with us
- Generally one visit, start to finish
- Technicians who travel to you, UK-wide
- Same prices wherever you are
- No need to remove anything
See our prices page or resurfacing vs replacement cost guide.
Materials and what they mean for the repair
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Prices and what affects them
Prices start from £350. We don’t charge extra for travel to Marton. The price comes down to:
- The size and number of damaged areas
- How easy the damage is to reach
- Whether it’s a chip, crack, burn or wear
- Doing more than one item at once
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send pictures and we will give you the exact figure.
Getting a price from pictures
Photographing the damage takes a minute, and it saves a visit. Please include:
- Details of any past repairs
- Daylight if possible, and no flash reflection
- A wider photo showing the whole bath
- What it’s made of, if you know
A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them over. You will get a fixed quote, not an estimate.
Questions from Marton
What information do you need?
Photos of the damage, a photo of the whole bath and your postcode. Then we will agree a date.
Can you quote from photos?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Is it OK to have pets in the house?
Yes, as long as they stay out of the room we are working in. We’ll let you know when it’s safe to use again.
Is there a call-out fee?
There is no separate call-out charge. Your fixed price includes everything.
It’s been repaired before. Can you still fix it?
Generally, yes. Tell us what was done before and we will plan for it.
Can I add another job to the visit?
Of course, and it normally saves money. Just add the extra items to your pictures and we’ll quote them together.
How long does re-enamelling last?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
For landlords and businesses
Landlords, letting agents and housing providers in Marton use us as well as homeowners. Repairing between tenancies keeps void periods short, and it usually costs far less than a refit.
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which is easier on the people living there.
DIY repairs versus a professional job
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
About our accreditations · Every repair comes with a one-year guarantee.
