Hampshire · England
Bath Re-enamelling in Meonstoke
Our technicians come to Meonstoke for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- Stains that will not shift
- A coloured bath you want in white
How the visit works
There is not much you need to do on the day. Show us the job, point us to the room, and we’ll take it from there. Most visits take a full day.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can usually be used the following day.
Getting ready for the visit
- Mention if the room is upstairs or in a flat
- Mention any earlier repairs or resurfacing
- Have a window or extractor fan available
Getting a price
Send us photos of the damage and one of the entire item, and tell us you’re in Meonstoke, and we will reply with a fixed price.
Read more
Bath re-enamelling in Meonstoke without replacing anything
The bath stays where it is, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, with the bath ready to use the following day. Typical jobs include chips and rust in more than one place and wear marks under the taps, in pressed steel baths, Victorian roll-tops and cast iron baths.
The work is covered for a year after we finish. Just call us if there is a problem and we’ll come back.
- Location
- Meonstoke (SO32)
- County
- Hampshire
- Warranty
- One year on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
DIY kit or professional repair?
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Where we work around Meonstoke
Meonstoke is about 7 miles north-west of Horndean, in Hampshire. Anywhere in SO32, we carry out the work at your property. Meonstoke is one of 683 places in Hampshire we cover. You can also see our page for London, about 57 miles away.
Here we cover the SO32 postcode area. From High Street, Oxendown and Fry's Lane or a nearby road, we can come to you. Close by, we cover Corhampton (1 mile north), Exton (1 mile north), Brockbridge (1 mile south-west), Droxford (1 mile south-west) and Soberton (2 miles south). Within a short drive, we also cover Winchester (10 miles north-west), Gosport (12 miles south), Havant (10 miles south-east), Eastleigh (10 miles west), Fareham (9 miles south) and Horndean (7 miles south-east).
What’s near Meonstoke
Locally, our jobs take us to homes close to The Bucks Head pub, Church of St Andrew and Meonstoke Church of England Infant School, among other places. The countryside around Meonstoke includes Beacon Hill and St Clair's Meadow.
Also near Meonstoke
Also in Meonstoke
Repair or replace in Meonstoke?
If the bath is sound, re-enamelling is generally much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Prices start from £350. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Why Meonstoke customers choose us
- We leave the room as we found it
- A fixed quote before booking
- Accredited with CHAS, Constructionline and SafeContractor
- A year’s guarantee on all work
Take a look at our pricing and bath cost comparison.
Landlords, agents and businesses in Meonstoke
For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
We’re used to working with agents and managing companies. Send the address, photos and access details.
Honest limits
Before you book, it’s worth knowing the limits:
- Leaks from fittings rather than the bath
- A cast iron or steel bath that is cracked right through
- Steel that has corroded right through
Send us pictures and we’ll tell you honestly.
Materials we work on in Meonstoke
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
How we price bath re-enamelling
Prices start from £350. There’s no charge for travel to Meonstoke. The price comes down to:
- What kind of damage it is
- The size and number of damaged areas
- How easy the damage is to reach
- Unusual colours or finishes
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Quotes from your photos
A couple of clear pictures is all it takes. Try to include:
- Details of any past repairs
- Good light, ideally daylight, without flash glare
- What it’s made of, if you know
- Something in shot to show the size
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them over. What comes back is a fixed price, not a guess.
Aftercare tips
Once the work has cured, treat it gently:
- Keep suction mats out of the bath
- Use washing-up liquid and a soft cloth
- Don’t leave a chip unrepaired
- Wash away dyes and oils after use
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
Signs you need bath re-enamelling in Meonstoke
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. We strip what’s failing and start again.
The things clients usually mention when they call include:
- A bath in a colour that no longer suits
- A peeling or bubbling previous coating
- Thin, worn enamel in places
- Enamel that’s lost its shine and feels rough
Questions to ask before booking
- When it can be used again
- A fixed price, and whether VAT is included
- The length of the guarantee and what it covers
- What happens if the damage is worse than the photos show
FAQs for Meonstoke
Can a failed resurfacing be redone?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
Is my repair covered?
Every repair comes with a one-year guarantee. We will explain what it covers when we quote.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can you quote from photos?
Typically, yes. A close-up and a wider photo are enough to give a fixed quote.
Do the materials smell?
A little, depending on the job. Ventilation keeps it to a minimum.
Can you change the colour of my bath?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
I rent my home. Can I book you?
Of course. Check with your landlord; we can send the quote to them too.
What happens next?
You’ll get a fixed quote back, generally with dates to choose from. You are under no obligation.
About our accreditations · Every repair comes with a one-year guarantee.
