Hampshire · England
Bath Re-enamelling in Corhampton
Bath re-enamelling for Corhampton, without a refit. Get a fixed quote from your pictures, then book a visit.
- Resurfacing from £350
- A coloured bath you want in white
- Worn patches where water runs and sits
For landlords and businesses
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
We’re used to working with agents and managing companies. Send the address, photos and access details.
How we handle bath re-enamelling in Corhampton
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. There’s no removal, plumbing or tiling involved. Typical jobs include a bath that stays dull however much you clean it and a peeling or bubbling previous coating, in acrylic baths, cast iron baths and basins & shower trays.
Every repair is covered by a one-year guarantee.
- Location
- Corhampton (SO32)
- County
- Hampshire
- Guarantee
- One year on every repair
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What we do, step by step
Here’s how a visit normally runs: we arrive on time, sheet and mask the area around the job, carry out the work and clear up. Plan for the best part of a day. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the next day.
How to prepare
- Have somewhere for us to park nearby if possible
- Ensure the room can be ventilated
- Tell us about any previous repairs or coatings
Ask for a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job the same day in most cases.
Read more
Also near Corhampton
More services for Corhampton
Repairs by material
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Should you replace it?
Replacing a bath normally involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and usually one day, with the bath ready the day after. Prices start from £350. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why book with us
- Work done at your home or business
- One visit for most repairs
- Accredited with CHAS, Constructionline and SafeContractor
- A fixed quote before you book
See our pricing or guide to resurfacing and replacement costs.
Our work in Corhampton
Corhampton is about 7 miles north-west of Horndean, in Hampshire. From the centre of Corhampton to the outlying streets, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Corhampton is one of 683 towns and villages in Hampshire we cover. We work right across the region, from Corhampton to London (57 miles away).
All of SO32 is covered, from the main roads to the quietest streets. You’ll find streets such as De Port Heights, Warnford Road and Millside, all of which we cover. If you are just outside Corhampton, we cover Exton (1 mile north), Meonstoke (1 mile south), Brockbridge (1 mile south), Droxford (1 mile south) and Soberton (2 miles south). Further out, we also cover Winchester (10 miles north-west), Gosport (12 miles south), Havant (10 miles south-east), Eastleigh (9 miles west), Fareham (9 miles south) and Horndean (7 miles south-east).
Around Corhampton
Locally, our jobs take us to homes close to Meonstoke Church of England Infant School, The Shoe Inn and Corhampton Church. Open spaces near Corhampton include Beacon Hill and St Clair's Meadow.
DIY repairs versus a professional job
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
Do you need bath re-enamelling in Corhampton?
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
You may need us if you’ve spotted any of these:
- An outdated colour you’d like to change
- Enamel that is lost its shine and feels rough
- A peeling or bubbling previous coating
- Brown or grey marks that do not clean off
What your quote should include
- Is the price fixed, and does it include VAT?
- How long it needs to cure
- What happens if they find more damage
- Whether cleaning and preparation are in the price
Questions from Corhampton
How long is the bath unusable?
Generally a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
Can I add another job to the visit?
Yes. Doing several items on one visit generally costs less than separate visits. Include pictures of each item.
Do you resurface freestanding baths?
Yes, often. We resurface the inside, and the outside can be refinished too.
Is my repair covered?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
Do you work in Corhampton?
Yes, we do. Technicians travel to Corhampton from across the region, and the price is the same as everywhere else.
I’m a tenant. Can you help?
We are happy to deal with the tenant, landlord or agent. Just ensure the landlord agrees.
What does bath re-enamelling cost?
Prices start from £350. We give a fixed quote from your pictures. Send a close-up of the damage and a wider photo with your SO32 postcode.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Prices and what affects them
Resurfacing from £350. We don’t charge extra for travel to Corhampton. The price depends on:
- Whether we combine several jobs
- Whether it’s a chip, crack, burn or wear
- Any earlier repairs that need removing first
- The colour and finish to match
Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.
Quotes from your pictures
Photographing the damage takes a minute. Try to send:
- Any details about the material
- Something in shot to show the size
- Any earlier repairs or coatings
- Daylight if possible, and no flash reflection
Email us pictures of the damage and a wider shot of the whole item, with your SO32 postcode, and we will reply with a fixed price.
How to look after the repair
Nothing complicated is needed, just a few sensible habits:
- Avoid suction-cup mats
- A dripping tap should be fixed promptly
- Store bottles off the bath
- Rinse off hair dye, oils and bath bombs immediately
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
About our accreditations · Every repair comes with a one-year guarantee.
