Middlesbrough · England
Bath re-enamelling & resurfacing in Middlehaven, Middlesbrough
Full bath re-enamelling and resurfacing in Middlehaven, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- Stains that won’t shift
How we handle bath re-enamelling in Middlehaven
Most baths are re-enamelled in a day, and you can use the bath the following day. Nothing is disconnected or removed. If you’re dealing with chips and rust in more than one place and a peeling or bubbling previous coating, we can usually put it right, whatever the material.
The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.
- Where
- Middlehaven (TS1, TS2, TS3)
- County
- Middlesbrough
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Landlords, agents and businesses in Middlehaven
Housing associations and facilities teams use us for planned and reactive repairs in Middlesbrough and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
What we cannot put right
To be straight with you, some problems need a different fix:
- Plumbing leaks, which need a plumber
- An acrylic bath that flexes badly underfoot
- A cast iron or steel bath that is cracked right through
Not sure? Send pictures and we will give you a straight answer.
What we work on
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
Why repair rather than replace?
Replacement only makes sense in a few cases: if the bath is cracked through, if you want a different size or shape, or if you’re refitting the entire room anyway. Otherwise, resurfacing normally wins. Prices start from £350. No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Why us?
- No need to remove anything
- Most jobs done in one visit
- A fixed quote before booking
- No extra charge for your area
Read our prices page and bath cost comparison.
What bath re-enamelling costs
Resurfacing from £350. Prices are worked out job by job, from your photos. The main factors are:
- How much damage there is
- Where the damage is and how we get to it
- How many items we do on one visit
- Whether it’s a chip, crack, burn or wear
The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. You get a fixed quote from your photos, so there are no surprises on the day.
How to get a fixed price
The better the photos, the more accurate the price. Here’s what we find most useful:
- A wider photo showing the entire bath
- One sharp close-up of the damage
- Whether it’s been repaired or coated before
- Good light, ideally daylight, without flash glare
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them over. You will get a fixed price, not an estimate.
Common questions in Middlehaven
Do you work in Middlehaven?
Yes. We cover the whole UK and come to Middlehaven and the rest of Middlesbrough. Send pictures and we will quote, or call 0345 017 0787.
Can you re-enamel a roll-top bath?
Yes. Inside and out.
Will you leave a mess?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
Is my repair covered?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Which areas do you work in?
The entire UK, including all of Middlesbrough. Send your postcode with your pictures and we’ll offer you dates.
Can you redo someone else’s repair?
Most of the time. Let us know what was used before.
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Repairs by material
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Towns and villages near Middlehaven
More services for Middlehaven
DIY kit or professional repair?
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.
Looking after it afterwards
How the surface is treated afterwards matters:
- Wipe the bath dry after use in hard water areas
- Don’t use the bath until it has fully cured
- Clean with a soft cloth and mild detergent
- Have chips seen to early
A quick rinse and wipe after use helps, especially in hard water areas, to stop limescale building up.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
What happens on the day
Nothing needs to be moved out of the room. Everything we use comes in the van with us, put protection down and start once you are happy with the plan. Most jobs take a full day, and you are welcome to carry on with your day while we work.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Have a window or extractor fan available
- Tell us about parking, stairs or access
- Mention any earlier repairs or resurfacing
How to get a price
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through.
Advice
About Middlehaven
Middlehaven is about 2 miles north of Grove Hill, in Middlesbrough. Across the TS1 area, a technician comes to you. Middlehaven is one of 33 towns and villages in Middlesbrough we cover. We work right across the region, from Middlehaven to Newcastle upon Tyne (about 32 miles away).
Our visits in TS1, TS2 and TS3 are booked in the same way as anywhere else. You will find streets such as Depot Road, Snowdon Road and Dundas Mews, and we cover them all. Middlehaven is on the A178, so it’s easy for us to reach. We also cover the places around Middlehaven: Port Clarence (1 mile north), High Clarence (1 mile north), Grove Hill (2 miles south), Marton Grove (2 miles south) and Linthorpe (2 miles south). We also work in nearby towns such as Park End (3 miles south-east), Whale Hill (4 miles east), Normanby (4 miles south-east), Brookfield (4 miles south), Newtown (4 miles west) and Nunthorpe (4 miles south-east).
Local landmarks in Middlehaven
Typical jobs here are in homes near High Clarence Primary School, Captain Cook Public House and Cathedral Church of Our Lady of Perpetual Succour. Also close by are Portrack Incinerator (1.5 miles south-west) and Outwood Academy Riverside (0.6 miles south-east). There is a railway station in Middlehaven itself: Middlesbrough station. Well-known places in the area include Carter Bequest Primary Care Hospital (2 miles south) and Cleveland Crafts Centre (0.6 miles south-west). For a walk, there’s Eston Nab and RSPB Salthome.
About our accreditations · Every repair comes with a one-year guarantee.
