Norfolk · England
Bath re-enamelling & resurfacing in Middleton, Norfolk
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Middleton. Free, fixed quotes from your photos.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Staining under the taps and around the waste
What we are called out for in Middleton
Often the bath has just had decades of use, with nothing wrong except the surface. Underneath, a cast iron or steel bath is typically as strong as ever.
Most people get in touch after spotting one of these:
- A period or roll-top bath worth keeping
- Several chips and rust patches
- Staining under the taps and around the waste
- Worn patches where water runs and sits
Before you book anyone
- What happens if they find more damage
- Whether the price covers travel
- How to look after the finish
- Whether they match the colour on site
Bath re-enamelling at your home in Middleton
After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, so we do not cut corners on it. Whether it’s a coating lifting around the plughole and brown or grey marks that don’t clean off, we can normally put it right, whatever the material.
You are covered for a year from the day of the repair. If anything is not right, ring us and we’ll sort it.
- Where
- Middleton (PE32)
- Area hub
- Norfolk
- Cover
- One year on every repair
- Price
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
FAQs for Middleton
It’s been repaired before. Can you still fix it?
Yes, regularly. Removing the old work can add time, and that’s in the quote.
What does bath re-enamelling cost?
Prices start from £350. We give a fixed quote from your photos. Send a close-up and a picture of the entire item and your postcode.
Can I get a quote without a visit?
Normally, yes. Clear photos let us give you a fixed price without visiting.
Do you cover Middleton?
Yes. We work across the UK and travel to Middleton. Send us pictures for a fixed quote, or call 0345 017 0787.
Can a failed resurfacing be redone?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Will it make a mess?
No. The work area is masked and covered, and we take our waste away with us.
Are there extra charges for Middleton?
Travel is included in the price, with the same prices everywhere we work.
How long does re-enamelling take?
Usually a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Repairs by material
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
Covering Middleton
Middleton is about 3 miles south-east of King's Lynn, in Norfolk. Clients in Middleton get the same service as everywhere else we cover: a fixed quote from photos, and a technician at your door on the day. Middleton is one of 797 places in Norfolk we cover.
Our visits in PE32 are booked in the same way as anywhere else. You will find streets such as Station Road, Paul Drive and Hill Side Close, all of which we cover. If you are just outside Middleton, we cover Tower End (1 mile north-east), North Runcton (1 mile south-west), Blackborough End (1 mile south), Leziate (2 miles north-east) and Hardwick (2 miles north-west). Larger places within reach include King's Lynn (3 miles north-west), Downham Market (9 miles south), Swaffham (11 miles south-east), Hunstanton (15 miles north), Heacham (13 miles north) and West Lynn (4 miles north-west).
Around Middleton
Typical jobs here are in homes near Crown Public House, Middleton Church of England Primary Academy and Church of St Mary. The closest station to Middleton is Kings Lynn station, about 3 miles north-west of the centre. Well-known places in the area include Kings Lynn The Red Mount (2.9 miles north-west) and Captain Fawcett's Emporium Marvellous Barbershop Museum (2 miles west).
Landlords, agents and businesses in Middleton
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we’ll arrange it.
Landlords, letting agents and housing providers in Middleton use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Towns and villages near Middleton
What else we do in Middleton
When we would advise against a repair
Honesty matters more than a booking, so here’s what a repair won’t do:
- A bath that’s rusted through
- Damage hidden under a previous coating, until it’s stripped back
- A poorly supported acrylic bath, until it’s firmed up
Not sure? Send photos and we’ll give you a straight answer before you book.
Surfaces we repair
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
How it works
There is not much you need to do on the day. Show us the job, point us to the room, and we’ll get on with it. Most visits take a full day, including clearing up.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the next day, the bath is ready.
Preparing for the visit
- Mention any earlier repairs or resurfacing
- Keep a parking space free if you can
- Keep pets and children out of the room while we work
How to get a price
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and you will get a fixed quote back. Quotes are free and you are under no obligation.
Read more
Why repair rather than replace?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and generally a day, with the bath back in use the day after. Resurfacing from £350, with every job priced individually. A repair normally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
What you get with us
- A fixed quote before booking
- Most jobs done in one visit
- Technicians who travel to you, UK-wide
- Straight answers about what a repair can do
Take a look at our pricing and guide to resurfacing and replacement costs.
Looking after it afterwards
Much of the damage we repair could have been avoided. These habits help:
- Rinse off hair dye, oils and bath bombs straight away
- Keep suction mats out of the bath
- Dry the bath after use to stop limescale
- Have chips seen to early
The first few days matter most: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
Should I try a DIY kit first?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
If you are set on a kit, follow its instructions closely, and give it the full curing time. If it fails, we can still put it right.
About our accreditations · Every repair comes with a one-year guarantee.
