Norfolk · England
Bath Re-enamelling for Blackborough End homes
Full bath re-enamelling and resurfacing in Blackborough End, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Worn patches where water runs and sits
- A peeling or bubbling previous coating
About our bath re-enamelling in Blackborough End
If your bath is sound but looks tired, re-enamelling is usually the most cost-effective option. There is no removal, plumbing or tiling involved. Whether it’s thin, worn enamel in places and a period or roll-top bath worth keeping, we can typically put it right, on basins & shower trays, cast iron baths and acrylic baths alike.
You are covered for a year from the day of the repair. If anything is not right, ring us and we will come back.
- Area
- Blackborough End (PE32)
- Area hub
- Norfolk
- Cover
- One year on every repair
- Price
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Materials and what they mean for the repair
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Common problems we fix in Blackborough End
Previous coatings can fail too, peeling around the waste or bubbling. We strip what’s failing and start again.
The most common problems we are called about are:
- A roll-top that is seen better days
- A coloured bath you want in white
- Worn patches where water runs and sits
- An old resurfacing that’s failing
Before you book anyone
- How the room is protected while they work
- Is the price fixed, and does it include VAT?
- Who will actually do the work
- Aftercare advice
Blackborough End and the surrounding area
Blackborough End is about 4 miles south-east of King's Lynn, in Norfolk. Whether you’re in the middle of Blackborough End or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Blackborough End is one of 797 places in Norfolk where we work.
Jobs in PE32 work the same way as everywhere else we cover. Local streets include The Alley, Mill Lane and East Winch Road. Close by, we cover Middleton (1 mile north), North Runcton (1 mile north-west), Tower End (2 miles north), West Winch (2 miles west) and Leziate (3 miles north). We also work in nearby towns such as King's Lynn (4 miles north-west), Downham Market (8 miles south-west), Swaffham (10 miles south-east), Fairstead (3 miles north), Heacham (14 miles north) and West Lynn (5 miles north-west).
Near you in Blackborough End
Typical jobs here are in homes near Crown Public House, Church of St Mary and Middleton Church of England Primary Academy. The nearest railway station is Watlington station, roughly 4 miles south-west. A little further out are Queen Elizabeth Hospital (3.6 miles north) and Captain Fawcett's Emporium Marvellous Barbershop Museum (2.9 miles north-west).
Blackborough End: your questions answered
Are there extra charges for Blackborough End?
Travel is included in the price, with the same prices everywhere we work.
Can I get a quote without a visit?
Nearly always. We only ask to see it in person if the photos cannot show what we need.
How do I get a price for bath re-enamelling in Blackborough End?
Prices start from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged.
Do you cover the whole of Norfolk?
The entire UK, including all of Norfolk. Send your postcode with your photos and we’ll confirm dates.
Can you resurface a pink bath in white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
Can you redo someone else’s repair?
In most cases. The old repair comes out first.
When we’d advise against a repair
A repair isn’t right for every job, including:
- Holes rusted through the metal
- A poorly supported acrylic bath, until it’s firmed up
- Anything hidden under an old coating, until we remove it
Send us photos and we’ll tell you honestly before booking.
Surfaces we repair
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
Places near Blackborough End
More services for Blackborough End
The process
Nothing needs to be moved out of the room beforehand. Everything we use comes in the van with us, put protection down and get going once we’ve agreed what we are doing. Most jobs take a full day, and you can get on with other things while we’re there.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the day after.
Preparing for the visit
- Mention any earlier repairs or resurfacing
- Mention if the room is upstairs or in a flat
- Open a window if you can
Ask for a price
Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and we’ll reply with a fixed quote. There’s no charge for the quote and you are under no obligation.
Advice
Repair or replace in Blackborough End?
Replacing the bath means a plumber, lifting out the old bath, re-tiling or making good the walls and several days without a working bathroom. Resurfacing renews the whole surface with the bath left where it is. Our bath re-enamelling starts from £350. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.
Why Blackborough End clients choose us
- CHAS and Constructionline accredited
- Colours mixed by hand to suit your surface
- A fixed quote before booking
- Most jobs done in one visit
See our pricing or bath cost comparison.
How we price bath re-enamelling
Resurfacing from £350. We price every job individually. What matters most is:
- How hard the colour is to match
- The material and finish
- Whether it’s a chip, crack, burn or wear
- Access to the area
The price reflects the work involved, not your postcode. The full price is agreed before booking.
Send pictures for a quote
You can usually get a fixed quote without us visiting. To help us price it:
- A coin or ruler next to the damage for scale
- Details of any past repairs
- One picture of the entire bath
- A close-up of the damage, in focus
There is no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
For landlords and businesses
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Looking after it afterwards
Aftercare is simple:
- Wipe the bath dry after use in hard water areas
- Clean with a soft cloth and mild detergent
- Repair dripping taps early
- Have chips seen to early
The first few days matter most: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
About our accreditations · Every repair comes with a one-year guarantee.
