Devon · England
Bath Re-enamelling for Milber homes
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Milber. Free, fixed quotes from your pictures.
- Resurfacing from £350
- A coloured bath you want in white
- Enamel that is lost its shine and feels rough
Bath re-enamelling at your home in Milber
We don’t move the bath, so the taps, tiles and plumbing are not touched. It typically takes one visit, and can be used again the next day. Our technicians work on basins & shower trays, Victorian roll-tops and pressed steel baths, and common reasons people contact us are staining under the taps and around the waste and worn patches where water runs and sits.
Peace of mind is built in: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Area
- Milber (TQ12, TQ13)
- Region
- Devon
- Cover
- A year, on every repair
- Quote
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Landlord and trade work in Milber
Letting agents frequently send us photos straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Why repair rather than replace?
Replacing a bath can take several days across several trades. Re-enamelling is one technician, typically one day. Resurfacing from £350, with every job priced individually. There are no surprise extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why choose Surface Doctor in Milber
- Dust sheets down, tidy finish
- Work done at your home or business
- CHAS, Constructionline and SafeContractor accredited
- Colour mixed on the day to match
Read our full price list and guide to resurfacing and replacement costs.
Aftercare tips
To keep it looking its best for years:
- Do not use the bath until it has fully cured
- Wipe the bath dry after use in hard water areas
- Fix dripping taps quickly
- Have chips seen to early
Treat the new finish gently at first: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
Common problems we fix in Milber
A dull surface stains and holds dirt, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
It’s worth getting a quote if you see:
- A peeling or bubbling previous coating
- Brown or grey marks that do not clean off
- A bath in a colour that no longer suits
- An original cast iron bath that needs restoring
What to look for in a quote
- What prep work is covered
- Whether a trained technician does the job
- If travel is included in the price
- What the guarantee covers, and for how long
How it works
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take most of the day. We clean up when we’re done and tell you when it’s ready to use.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Mention if the room is upstairs or in a flat
- Mention any parking restrictions or tricky access
- Clear the area around the damage
Getting a price
We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Related advice
What we can’t put right
A few problems are outside what a surface repair can do:
- Anything hidden under an old coating, until we remove it
- Acrylic that moves when you stand in it
- A bath that’s rusted through
If in doubt, send photos and we will say what we think.
Surfaces we repair
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Basins & shower trays
About Milber
Milber is about 1 mile south-east of Newton Abbot, in Devon. We travel to homes and businesses in Milber, so you do not need to take anything anywhere. Our technicians cover 586 places across Devon.
Jobs in TQ12 and TQ13 work the same way as everywhere else we cover. That includes homes on Vale Road, Decoy Road and Cedar Road. Milber is on the A380, which makes it straightforward to reach. If you’re just outside Milber, we cover Netherton (1 mile north-east), Coffinswell (1 mile south-east), Haccombe (2 miles east), Kingsteignton (2 miles north) and Combeinteignhead (2 miles north-east). We also work in nearby towns such as Exeter (14 miles north), Exmouth (11 miles north-east), Teignmouth (4 miles north-east), Dawlish (7 miles north-east), St Thomas (14 miles north) and Larkbeare (14 miles north).
Around Milber
In Milber, that means homes near Courtenay Park, Church of St Luke and South Devon UTC and the streets around them. Also close by are Toby Carvery Newton Abbott pub (less than half a mile north-west), Passmore Edwards Centre (1.1 miles north-west), South Devon UTC (1.1 miles north-west) and Haytor View Community Primary School (under half a mile north). The closest station to Milber is Newton Abbot station, roughly 0.6 miles north-west. Nearby you’ll also find Old Newton Abbot Hospital (0.8 miles north-west) and Newton Abbot Museum (1.1 miles west). Not far away are Labrador Bay RSPB Reserve.
How we price bath re-enamelling
Prices start from £350. There are no hourly rates or hidden extras. The price depends on:
- Unusual colours or finishes
- What kind of damage it is
- The material
- How many areas need work
Set against the cost of replacement, repairing typically costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Send photos for a quote
Phone photos are fine, there is no need for anything special. Ensure they show:
- A coin or ruler next to the damage for scale
- The material, if you know it
- Good light, ideally daylight, without flash glare
- Details of any past repairs
Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and you’ll get a fixed price back. There’s no charge for the quote and no obligation.
More services for Milber
Common questions in Milber
Will there be fumes?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It fades as the coating cures.
Can you resurface a pink bath in white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
Will the bath be moved?
No, it stays where it is. Everything is done in your bathroom, with the room masked and ventilated.
What happens once I’ve sent photos?
We review the pictures and send a fixed quote and the next dates we have.
How long will the bath be out of use?
Most baths are done in a day and can be used the day after. We will confirm timings when we quote.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Is it worth repairing rather than replacing?
Usually, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we will say so.
Is there a guarantee?
Every repair comes with our one-year guarantee. We will explain what it covers when we quote.
Materials and what they mean for the repair
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
About our accreditations · Every repair comes with a one-year guarantee.
