Dorset · England
Bath Re-enamelling in Milborne Wick
Damaged bath in Milborne Wick? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- A coloured bath you want in white
- Chips and rust in more than one place
About our bath re-enamelling in Milborne Wick
Re-enamelling is a one-day job for most baths. Taps, tiles, panels and plumbing all stay in place. Typical jobs include a dull, rough surface that won’t come clean and lots of chips and rust spots, on acrylic baths, basins & shower trays and cast iron baths.
Every repair is covered by a one-year guarantee, wherever you are in Dorset.
- Location
- Milborne Wick (DT9)
- County
- Dorset
- Warranty
- One year on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Your questions about bath re-enamelling in Milborne Wick
Can you quote from pictures?
In nearly every case. We only ask to see it in person if the photos can’t show what we need.
Is there a guarantee?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
How much does bath re-enamelling cost in Milborne Wick?
Resurfacing from £350. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Do you come to Milborne Wick?
We do. We send a technician to Milborne Wick for every job, and the price is the same as everywhere else.
Can you fix a peeling bath coating?
Typically, yes. The old coating comes off before we resurface it. Mention it when you send pictures.
Can you re-enamel a roll-top bath?
Yes, often. We resurface the inside, and the outside can be refinished too.
What if the damage is worse than the pictures show?
Your quote covers the damage in the photos. If there’s more, we’ll tell you before starting.
Can tenants book a repair?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Why repair rather than replace?
A replacement frequently means several trades over several days. Resurfacing takes one technician and generally a day, with the bath back in use the next day. Resurfacing from £350, with every job priced individually. Compared with replacing, repairing usually costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Why Milborne Wick clients choose us
- We leave the room as we found it
- A year’s guarantee on all work
- CHAS, Constructionline and SafeContractor accredited
- Nothing taken out or refitted
Read our pricing and resurfacing vs replacement cost guide.
Work for landlords and builders
Housing associations and facilities teams use us for planned and reactive repairs in Dorset and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
How it works
We turn up at the time we agreed with you and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. The work itself takes a full day, and we leave the room as we found it.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Open a window if you can
- Ensure the area is dry
- Mention any earlier repairs or resurfacing
Getting a price
To get a price, send a couple of pictures using our quote form or ring us. We’ll say straight away whether it can be repaired.
Advice
When to call us in Milborne Wick
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
The things clients normally mention when they call include:
- An old resurfacing that’s failing
- A period or roll-top bath worth keeping
- A dull, rough surface that won’t come clean
- Staining under the taps and around the waste
Before you book anyone
- What preparation is included
- How to care for the finish
- Whether a trained technician does the job
- How soon you can use it again
Where we work around Milborne Wick
Milborne Wick is about 8 miles east of Yeovil, in Dorset. Clients in Milborne Wick get the same service as everywhere else we cover: a fixed quote from pictures, and a technician at your door on the day. Milborne Wick is one of 462 places in Dorset where we work.
Every address in DT9 is covered. Close by, we cover Milborne Port (1 mile south-east), Henstridge Bowden (1 mile east), Oborne (2 miles south-west), Goathill (2 miles south) and Purse Caundle (2 miles south-east). Further out, we also cover Gillingham (9 miles north-east), Shaftesbury (13 miles east), Sherborne (3 miles south-west), Peacemarsh (9 miles north-east), Sturminster Newton (8 miles south-east) and Stalbridge (5 miles east).
Near you in Milborne Wick
Typical jobs here are in homes near The Gryphon School, Milborne Port Primary School and Milborne Wick Mission Church. The closest station to Milborne Wick is Templecombe station, roughly 2.8 miles north-east of the centre. Other landmarks nearby include Sherborne Old Castle (2.6 miles south-west) and Sherborne Steam & Waterwheel Centre (2.6 miles south-west).
What a repair can’t fix
We would rather lose a job than do one that won’t last, so here’s what a repair can’t put right:
- A metal bath with a through crack
- Leaking taps or wastes (a plumber’s job)
- Steel that has corroded right through
Not sure? Send photos and we will give you a straight answer.
Materials we repair
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
Nearby places to Milborne Wick
What else we do in Milborne Wick
Should I try a DIY kit first?
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.
If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
What bath re-enamelling costs
Prices start from £350. We give every job a fixed price from photos. This is what makes a difference:
- Doing more than one item at once
- Access to the area
- Previous DIY repairs that have to come out
- Unusual colours or finishes
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Send photos for a quote
A couple of clear pictures is all it takes. It helps if you send:
- Your postcode, so we can check dates
- Daylight if possible, and no flash reflection
- A close-up of the damage, in focus
- What it’s made of, if you know
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Keeping it looking good
Looking after the surface is easy:
- Get any chip repaired quickly
- Store bottles off the bath
- Never use suction bath mats
- A quick wipe after use keeps limescale away
A quick rinse and wipe after use helps, particularly where water is hard, to stop limescale building up.
If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
About our accreditations · Every repair comes with a one-year guarantee.
