Dorset · England
Bath Repair for Milborne Wick homes
Bath repair for Milborne Wick, without a refit. Get a fixed quote from your photos, then book a visit.
- Repairs from £95
- A chip where the taps sit
- Scratches you can feel with a fingernail
Bath repair in Milborne Wick without replacing anything
A typical bath repair is a few hours’ work, and the bath is back in use the next day. You will not need a plumber or tiler, because nothing is disconnected. We’re often asked to fix chips along the edge of the bath and snagging damage from a refit, across whirlpool & spa baths, roll-top & freestanding and acrylic.
The work is covered for a year after we finish. If anything isn’t right, ring us and we will come back.
- Area
- Milborne Wick (DT9)
- County
- Dorset
- Warranty
- 12 months on all our work
- Price
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
When a repair is not the answer
Before you book, it’s worth knowing the limits:
- Flexing caused by a failed cradle or loose feet
- Leaks from the waste or overflow fittings (a plumber’s job)
- Rust that has eaten right through a steel bath
Not sure? Send pictures and we will give you a straight answer before booking.
Surfaces we repair
- Roll-top & freestanding
- Pressed steel enamel
- Cast iron enamel
- Acrylic
- Whirlpool & spa baths
Landlord and trade work in Milborne Wick
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
If you manage property in Milborne Wick, we can repair and quote for several addresses together. Just send photos for each address and we will price them together.
Your questions about bath repair in Milborne Wick
How invisible is a bath repair?
The goal is a repair that blends in. How well it disappears depends on the condition of the rest of the bath, and we’ll tell you what to expect.
What areas do you cover?
We cover the whole UK, including Milborne Wick and the rest of Dorset. Send your postcode with your photos and we’ll confirm dates.
How do I get a price for bath repair in Milborne Wick?
Prices start from £95. Every job gets a fixed quote from your photos. Send a close-up and a picture of the entire item and your postcode.
What happens after I send photos?
You get a fixed quote and available dates. If anything’s unclear, we’ll ask for another photo.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Do you repair coloured baths?
Yes. The colour is mixed on site to suit your bath, including pastel and older colours.
Will the price change on the day?
Your quote covers the damage in the photos. Anything extra is discussed before we begin.
Is it safe with children and pets around?
Just keep them out of the work area. We’ll let you know when it’s safe to use again.
How to care for the repair
A little care keeps the finish looking good. Our advice:
- Stick to mild cleaners and a soft cloth
- Avoid scourers, wire wool and gritty cream cleaners
- Ensure an acrylic bath is firm underfoot
- Get a dripping tap fixed promptly
Don’t leave razors, cans or hair grips in the bath, as they can leave rust marks. A dripping tap should be fixed early, too.
Stop using the bath if a crack lets water through. Leaks under a bath can damage floors and ceilings.
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
The process
You don’t need to empty the room beforehand. Everything we use comes in the van with us, put protection down and get going once we’ve agreed what we’re doing. It usually takes a morning or an afternoon, and you can get on with other things while we’re there.
- We start by cleaning the damage and taking out loose enamel and rust.
- Next we fill the damage and sand it smooth and level.
- The colour is mixed on the spot to match your bath.
- Finish coats go on, then the repair is polished to blend in.
- We leave it to cure; you can normally use the bath the following day.
Getting ready for the visit
- Let us know about parking or access
- Tell us about any previous repairs or coatings
- Ensure the room can be ventilated
Getting a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job without visiting.
Related advice
What bath repair costs
Repairs from £95. There’s no area surcharge for Milborne Wick. What changes the price is:
- Whether we combine several jobs
- What kind of damage it is
- How much damage there is
- Where the damage is and how we get to it
What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed quote from your photos, so there are no surprises on the day.
Quotes from your pictures
The better the photos, the more accurate the price. Here’s what we find most useful:
- One sharp close-up of the damage
- Details of any past repairs
- Where you are, by postcode
- Good light, ideally daylight, without flash glare
Send us a photo of the damage and a wider shot of the whole item, and tell us you are in Milborne Wick, and we will reply with a fixed price.
What we’re called out for in Milborne Wick
A bath gets knocked about more than you’d think: everyday items get dropped into it all the time, and taps and wastes are tightened against the surface. Over time, chips and rust spots are almost inevitable.
The most common problems we are called about are:
- Rust by the waste and overflow
- Chips along the edge of the bath
- Scuffs and scratches in the surface
- Damage beneath the taps
What your quote should include
- Whether the price is fixed and includes VAT
- Aftercare advice
- What prep work is covered
- How soon you can use it again
Also near Milborne Wick
Also in Milborne Wick
Different materials, different repairs
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There is no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Milborne Wick and nearby
Milborne Wick is about 8 miles east of Yeovil, in Dorset. We agree a date that works for you, and we’ll give you an arrival time in advance, so you’re not left waiting in all day. Our repair technicians cover all 462 towns and villages in Dorset.
We work across DT9 and the streets around it. Close by, we cover Milborne Port (1 mile south-east), Henstridge Bowden (1 mile east), Oborne (2 miles south-west), Goathill (2 miles south) and Purse Caundle (2 miles south-east). Larger places within reach include Gillingham (9 miles north-east), Shaftesbury (13 miles east), Sherborne (3 miles south-west), Peacemarsh (9 miles north-east), Sturminster Newton (8 miles south-east) and Stalbridge (5 miles east).
Around Milborne Wick
We visit homes around The Gryphon School, Milborne Port Primary School and Milborne Wick Mission Church and the streets around them. Milborne Wick’s nearest station is Templecombe station, about 2.8 miles north-east. Well-known places in the area include Sherborne Old Castle (2.6 miles south-west) and Sherborne Steam & Waterwheel Centre (2.6 miles south-west).
About our accreditations · Every repair comes with a one-year guarantee.
