Wiltshire · England
Bath re-enamelling & resurfacing in Milbourne, Wiltshire
Damaged bath in Milbourne? We repair it in place, match it on site and guarantee the work for a year.
- Resurfacing from £350
- Stains that won’t shift
- Wear marks under the taps
How we handle bath re-enamelling in Milbourne
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, so we don’t cut corners on it. Common call-outs are for several chips and rust patches and staining under the taps and around the waste, on acrylic baths, cast iron baths and Victorian roll-tops.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Where
- Milbourne (SN16)
- County
- Wiltshire
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Aftercare tips
To keep it looking its best for years:
- Rinse off hair dye, oils and bath bombs right away
- Clean with a soft cloth and mild detergent
- Leave the bath for the full curing time before using it
- A dripping tap should be fixed promptly
Rinse the bath and wipe it over after use, especially in hard water areas, so limescale can’t build up.
Rust spots on a worn bath get worse with time. It’s simpler to resurface before they spread.
Also near Milbourne
Other services in Milbourne
When we’d advise against a repair
In fairness, there are a few things a repair will not fix:
- Damage hidden under a previous coating, until it’s stripped back
- A bath split right through the body
- Leaks from fittings rather than the bath
If in doubt, send pictures and we’ll say what we think.
What we work on
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Pressed steel baths
What affects the price in Milbourne
Prices start from £350. We don’t charge extra for travel to Milbourne. The price comes down to:
- Access to the area
- The size and number of damaged areas
- Previous DIY repairs that have to come out
- The type of damage
The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your pictures, so there are no surprises on the day.
Send photos for a quote
You can take the pictures on your phone, there is no need for anything special. Make sure they show:
- Where you are, by postcode
- Daylight if possible, and no flash reflection
- A coin beside the damage so we can judge size
- Any details about the material
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Landlord and trade work in Milbourne
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.
How it works
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take the best part of a day. We tidy up before we leave and let you know when you can use it again.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Tell us about any previous repairs or coatings
- Let us know about parking or access
- Let us know which floor the room is on
Getting a price
The quickest way to a price is to send two or three pictures using our quote form or call us. We will say straight away if a repair is the right fix.
Read more
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
What we are called out for in Milbourne
Frequently the bath has just had decades of use. Underneath, a cast iron or steel bath is generally as strong as ever.
Signs it’s time to call us include:
- Wear marks under the taps
- Chips and rust in more than one place
- A peeling or bubbling previous coating
- Brown or grey marks that don’t clean off
Comparing quotes
- How the colour is matched
- How the room is protected while they work
- What happens if they find more damage
- Whether cleaning and preparation are in the price
Milbourne and the surrounding area
Milbourne is about 9 miles north of Chippenham, in Wiltshire. We travel to homes and businesses in Milbourne and the surrounding area, so there is no workshop to go to. Milbourne is one of 425 places in Wiltshire we cover. We work right across the region, from Milbourne to Birmingham (about 61 miles away).
All of SN16 is covered. Jobs here include addresses on Milbourne Park, Milbourne Lane and Monks Park and the roads around them. Nearby, we also work in Malmesbury (1 mile west), Lea (1 mile south-east), Charlton (1 mile north-east), Charlton Heath (2 miles east) and Little Somerford (3 miles south-east). Within a short drive, we also cover Chippenham (9 miles south), Calne (11 miles south), Melksham (15 miles south), Corsham (12 miles south-west), Hardenhuish (9 miles south) and Lyneham (8 miles south-east).
Landmarks near Milbourne
Locally, our jobs take us to homes close to St Aldhelm's Roman Catholic Church, Malmesbury Church of England School and Music Academy and St Joseph's Catholic Primary School and the streets around them. Well-known places in the area include Athelstan Museum (0.7 miles south-west) and Malmesbury Castle (0.7 miles south-west).
Questions from Milbourne
What information do you need?
Just photos, your postcode and a contact number. On the day, access to the room.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Can pets and children be at home?
Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.
Can you redo someone else’s repair?
Generally, yes. Tell us what was done before.
Do you resurface freestanding baths?
Yes. Inside and out.
When can you do it?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
What happens after I send photos?
You get a fixed quote and available dates. If we need another angle, we’ll ask.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
About our accreditations · Every repair comes with a one-year guarantee.
