Derbyshire · England
Bath Re-enamelling for Milehill homes
Our repair technicians come to Milehill for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- Lots of chips and rust spots
- An outdated colour you’d like to change
Bath re-enamelling at your home in Milehill
After re-enamelling, the bath has a smooth, glossy, new-looking surface, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. If you are dealing with several chips and rust patches and a dull, rough surface that won’t come clean, we can normally put it right, on basins & shower trays, cast iron baths and acrylic baths alike.
Every repair is covered by a one-year guarantee.
- Location
- Milehill (S41)
- Region
- Derbyshire
- Guarantee
- A year, on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Milehill: your questions answered
Will the price change on the day?
We’ll show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.
Is the work guaranteed?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
When can you do it?
That depends on our diary for your area. We will offer you dates when we send your quote.
Do the materials smell?
There may be a mild smell during the work that clears as it cures.
Does the bath have to be removed?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
Can landlords book you?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.
Do you cover Milehill?
Yes. We work across the UK and travel to Milehill. Send us photos for a fixed quote, or call 0345 017 0787.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
When we would advise against a repair
A repair is not always the answer, and we would rather say so up front. We can’t fix:
- An acrylic bath that flexes badly underfoot
- Holes rusted through the metal
- Problems we can’t see until an old finish comes off
Send us pictures and we will tell you honestly.
Surfaces we repair
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Pressed steel baths
How the visit works
We work cleanly and quietly. Protection goes down first, then the work takes the best part of a day. At the end we talk you through how soon it can be used and how to care for it.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s generally ready the next day.
Getting ready for the visit
- Keep a parking space free if you can
- Avoid using the area for a few hours before we arrive
- Tell us about any previous repairs or coatings
Get a quote
Most customers in Milehill get their price from pictures. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Advice
Signs you need bath re-enamelling in Milehill
Hard water speeds up the wear, and abrasive cleaners do the most damage.
Common reasons people in Milehill contact us include:
- Wear marks under the taps
- A period or roll-top bath worth keeping
- A coloured bath you want in white
- Chips and rust in more than one place
Comparing quotes
- How soon you can use it again
- What prep work is covered
- A fixed quote, and whether VAT is included
- Whether the colour is mixed to match
Where we work around Milehill
Milehill is about 3 miles south-east of Chesterfield, in Derbyshire. Whether you are in the middle of Milehill or on the outskirts, the service is the same: a fixed price, a tidy visit and a guarantee. We cover all 532 towns and villages across Derbyshire. We work right across the region, from Milehill to Manchester (39 miles away).
All of S41 is within our area. We also cover the places around Milehill: Corbriggs (1 mile south-east), Temple Normanton (1 mile south-east), Cock Alley (1 mile north), Calow (2 miles north) and Sutton Scarsdale (2 miles east). Larger places within reach include Chesterfield (3 miles north-west), Belper (13 miles south), Heanor (14 miles south), Dronfield (7 miles north-west), Ripley (11 miles south) and Bolsover (5 miles east).
What’s near Milehill
Typical jobs here are in homes near Hasland Junior School, St Paul's Church and Hasland Hall Community School. For rail, the closest station is Chesterfield station, about 2.2 miles north-west of the centre. Further afield, we also cover the area around Chesterfield Royal Hospital (1.8 miles north) and Municipal Borough of Chesterfield (1.8 miles north-west).
Towns and villages near Milehill
Also in Milehill
Repairing versus replacing in Milehill
Getting a cast iron bath out is hard work: they’re heavy, often need breaking up, and a new one isn’t cheap. Resurfacing in place avoids that entirely. Prices start from £350. The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed price from your pictures, so you know the cost before you book.
Why Milehill clients choose us
- Straight answers about what a repair can do
- We come to you, anywhere in the UK
- Colour-matched on site
- No extra charge for your area
Take a look at our full price list or resurfacing vs replacement cost guide.
Work for landlords and builders
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
We work for landlords, letting agents and housing providers in Milehill as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Keeping it looking good
Once the work has cured, treat it gently:
- Store bottles off the bath
- Use washing-up liquid and a soft cloth
- A dripping tap should be fixed promptly
- Respect the curing time we give you
A quick rinse and wipe after use helps, especially in hard water areas, to stop limescale building up.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
Repairs by material
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is the part we put right.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Can I fix it myself?
A DIY attempt is not a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
About our accreditations · Every repair comes with a one-year guarantee.
