Pembrokeshire · Wales
Bath Re-enamelling for The Marsh homes
Bath re-enamelling in The Marsh without the cost of replacing. Send us photos for a fixed price, then we come to you.
- Resurfacing from £350
- A dull, rough surface that won’t come clean
- Stains that won’t shift
About The Marsh
The Marsh is about 36 miles west of Llanelli, in Pembrokeshire. From the centre of The Marsh to the outlying streets, the service is the same: a fixed quote, a tidy visit and a guarantee. The Marsh is one of 223 places in Pembrokeshire where we work.
Every address in SA61 is within our area, from the main roads to the quietest streets. Streets in the area include New Road, City Road and Hill Lane, and we cover them all. You will find The Marsh on the A487, which makes it straightforward to reach. Close by, we cover Haverfordwest (1 mile west), Prendergast (1 mile north), Slade (1 mile north-west), Tangiers (2 miles north) and Crundale (2 miles north-east). Further out, we also cover Milford Haven (7 miles south-west), Pembroke (9 miles south), Pembroke Dock (8 miles south), Dinbych-y-Pysgod (14 miles south-east), The Green (14 miles south-east) and Fishguard (13 miles north). Being one of Pembrokeshire’s larger places, The Marsh sees plenty of our work.
Landmarks near The Marsh
Typical jobs here are in homes near Waldo Williams Primary School, Sir Thomas Picton School and Church of Saint Thomas a Becket, among other places. Other local landmarks include Haverfordwest Grammar School (within half a mile south-west) and The Millford Arms Inn (under half a mile north). There’s a railway station in The Marsh itself: Haverfordwest station. Nearby you’ll also find Welsh Spitfire Museum (less than half a mile north-west) and Haverfordwest Castle (under half a mile north-west). Open spaces near The Marsh include Boulston Hill and Slebech Park Lake.
Bath re-enamelling in The Marsh, done in place
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, and we take our time over it. If you are dealing with lots of chips and rust spots and enamel that’s lost its shine and feels rough, we can generally put it right, whatever the material.
The work is covered for a year after we finish. Just call us if there is a problem and we’ll come back.
- Area
- The Marsh (SA61)
- Area hub
- Pembrokeshire
- Cover
- 12 months on all our work
- Quotes
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Common problems we fix in The Marsh
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. After years of use, the surface becomes porous and stains easily.
Typical reasons for a call-out include:
- Worn patches where water runs and sits
- A bath in a colour that no longer suits
- A bath that stays dull however much you clean it
- A coating lifting around the plughole
What to look for in a quote
- What protection goes down before work starts
- What the guarantee covers, and for how long
- How to look after the finish
- When it can be used again
Should you replace it?
Replacement only makes sense in a few cases: if the bath is cracked through, if you want a different size or shape, or if you’re refitting the whole room anyway. Otherwise, resurfacing typically wins. Our bath re-enamelling starts from £350. Our prices are the same across the UK, so there’s no premium for The Marsh. What changes the price is the job itself: the material, the amount of damage and how many items.
Why us?
- Technicians who travel to you, UK-wide
- Honest advice, even when it means no job
- Colour-matched on site
- One visit for most repairs
Take a look at our full price list and bath cost comparison.
Your questions about bath re-enamelling in The Marsh
Is repairing better than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
Will the bath be moved?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
What do you need from me?
Send photos through the quote form or call 0345 017 0787, and we’ll do the rest.
Will you leave a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Can I get a quote without a visit?
Nearly always. We only ask to see it in person if the photos cannot show what we need.
Can you fix a peeling bath coating?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Can you re-enamel a roll-top bath?
Yes, often. The inside is resurfaced, and we can refinish the outside as well.
Do you come to The Marsh?
Yes, we do. Technicians travel to The Marsh from across the region, and the price is the same as everywhere else.
What a repair cannot fix
A few problems are outside what a surface repair can do:
- Holes rusted through the metal
- A poorly supported acrylic bath, until it’s firmed up
- Leaking taps or wastes (a plumber’s job)
Send us pictures and we’ll tell you honestly before you book.
What we work on
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
The process
Your technician turns up when we said we would, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. The work itself takes most of the day, and the room is left clean and tidy.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Plan for the room to be out of bounds to pets and children
- Mention any parking restrictions or tricky access
- Have somewhere for us to park nearby if possible
Getting a price
To get a price, send a couple of pictures through our quote form or ring us. We’ll say straight away whether it can be repaired.
Advice
Aftercare tips
To keep it looking its best for years:
- Don’t let dyes or oils sit on the finish
- Repair dripping taps early
- Do not leave bottles, razors or sponges standing on the surface
- Wipe the bath dry after use in hard water areas
Wipe the bath dry after use where you can, especially in hard water areas, and rinse away any product left on the surface.
Rust spots on a worn bath get worse with time and make the job bigger. It’s simpler to resurface before they spread.
What affects the price in The Marsh
Resurfacing from £350. You will not pay by the hour. The price is based on:
- The material and finish
- Access to the area
- Any earlier repairs that need removing first
- The type of damage
Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access.
Send photos for a quote
Two or three clear pictures are generally enough. It helps if you send:
- Details of any past repairs
- Daylight if possible, and no flash reflection
- A clear, close picture of the problem area
- A photo taken from further back
Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and we will reply with a fixed quote. There’s no charge for the quote and you’re under no obligation.
For landlords and businesses
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Nearby places to The Marsh
More services for The Marsh
DIY kit or professional repair?
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
About our accreditations · Every repair comes with a one-year guarantee.
