Derbyshire · England
Bath re-enamelling & resurfacing in Millthorpe, Derbyshire
Full bath re-enamelling and resurfacing for homes and businesses in Millthorpe and across Derbyshire. Free, fixed quotes from your pictures.
- Resurfacing from £350
- Several chips and rust patches
- Wear marks under the taps
About our bath re-enamelling in Millthorpe
Most baths are re-enamelled in a day. Taps, tiles, panels and plumbing all stay in place. We regularly repair Victorian roll-tops, pressed steel baths and basins & shower trays, and common reasons people contact us are a coloured bath you want in white and wear marks under the taps.
You’re covered after we leave: each job carries a one-year guarantee, and we explain what it covers before booking.
- Area
- Millthorpe (S18)
- Area hub
- Derbyshire
- Cover
- A year, on every repair
- Quote
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Your questions about bath re-enamelling in Millthorpe
What happens after I send pictures?
You get a fixed price and available dates. If anything’s unclear, we’ll ask for another photo.
Do I need to be at home?
Someone needs to let us in and show us the job. You don’t need to watch us work.
Can tenants book a repair?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Will there be a smell?
It depends on the job, but frequently a little. Ventilation keeps it to a minimum, and it soon fades.
How much does bath re-enamelling cost in Millthorpe?
Prices start from £350. We give a fixed price from your pictures. Send a close-up and a photo of the entire item with your S18 postcode.
Is it safe with children and pets around?
Keep pets and children away from the work area on the day, so the repair isn’t disturbed while it cures.
What areas do you cover?
Everywhere in the UK, Millthorpe included. Travel is included in the price.
How to care for the repair
Most damage we see is avoidable. A few tips:
- Wipe the bath dry after use in hard water areas
- Do not let dyes or oils sit on the finish
- Respect the curing time we give you
- Avoid suction-cup mats
A quick rinse and wipe after use helps, especially in hard water areas, to stop limescale building up.
On a worn bath, rust spots keep spreading and make the job bigger. It’s simpler to resurface before they spread.
How the visit works
Arrival times are agreed in advance. Once we’re there, the work takes a full day in most cases. We leave the room clean and you will know when it can be used.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s generally ready the next day.
Preparing for the visit
- Keep pets and children out of the room while we work
- Let us know which floor the room is on
- Clear the area around the damage
How to get a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
Read more
Work for landlords and builders
We are used to working with agents and managing companies. Send the address, pictures and access details and we will handle the rest.
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
When a repair isn’t the answer
Honesty matters more than a booking, so here’s what a repair won’t do:
- A bath that’s rusted through
- Anything hidden under an old coating, until we remove it
- Leaking taps or wastes (a plumber’s job)
If in doubt, send photos and we will say what we think before you book.
Surfaces we repair
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
Also near Millthorpe
More services for Millthorpe
Different materials, different repairs
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
About Millthorpe
Millthorpe is about 3 miles south-west of Dronfield, in Derbyshire. From the centre of Millthorpe to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Millthorpe is one of 532 places in Derbyshire where we work. Our nearest city page is Manchester, about 31 miles away.
Jobs in S18 work the same way as everywhere else we cover. We also travel to Horsleygate (1 mile north), Unthank (1 mile south-west), Cartledge (1 mile north-east), Lydgate (1 mile north) and Holmesfield (1 mile north-east). We also work in nearby towns such as Chesterfield (5 miles south-east), Dronfield (3 miles north-east), Bolsover (11 miles east), Staveley (7 miles east), Matlock (10 miles south) and Clay Cross (10 miles south-east).
What’s near Millthorpe
Our clients here include homes close to St Swithin’s Church, Penny Acres Primary School and Royal Oak pub and the streets around them. For rail, the closest station is Dronfield station, roughly 2.8 miles north-east. Further afield, we also cover the area around Nether Edge Hospital (5.5 miles north) and Abbeydale Industrial Hamlet (3.5 miles north). Not far away are Blacka Moor Nature Reserve and Totley Moor.
- Local facilities include Dronfield Urban District (2.9 miles north-east)
Prices and what affects them
Prices start from £350. Quotes are free and the price is fixed. What we take into account:
- How much damage there is
- The material
- Whether it’s a chip, crack, burn or wear
- Doing more than one item at once
No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Send pictures for a quote
The better the photos, the more accurate the price. Here’s what helps:
- Details of any past repairs
- A coin or ruler next to the damage for scale
- A close-up of the damage, in focus
- One picture of the entire bath
To get a price, send two or three pictures through our quote form or ring us. We will say immediately whether it can be repaired.
Can I fix it myself?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
Should you replace it?
A new bath means a plumber, removing a heavy bath, re-tiling or making good the walls and days without a bathroom. Re-enamelling gives the bath a new finish with the bath left where it is. Prices start from £350. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why Millthorpe customers choose us
- No need to remove anything
- Every repair guaranteed for a year
- A fixed quote before booking
- Same prices wherever you are
Take a look at our prices page and guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
