Hampshire · England
Bath re-enamelling & resurfacing in Mislingford, Hampshire
Full bath re-enamelling and resurfacing in Mislingford, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Stains that won’t shift
- Enamel that is lost its shine and feels rough
Your questions about bath re-enamelling in Mislingford
Do you need to take the bath out?
No, it stays where it is. Everything is done in your bathroom, with the room masked and ventilated.
Can a failed resurfacing be redone?
In most cases. The old coating comes off before we resurface it. Mention it when you send photos.
Will there be fumes?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It clears as the finish cures.
What do you need from me?
A close-up, a wider photo and your postcode. After that, we just agree a date.
Do you come to Mislingford?
Yes. We work across the UK and come to Mislingford and the rest of Hampshire. Send us photos for a fixed quote, or call 0345 017 0787.
How long will the bath be out of use?
Normally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Do you charge for travel?
Travel is included in the price, with the same prices everywhere we work.
Is there a guarantee?
All our work carries a one-year guarantee. We’ll explain what it covers when we quote.
Bath re-enamelling at your home in Mislingford
The bath stays where it is, so the taps, tiles and plumbing are not touched. Most baths are done in one visit, with the bath ready to use the following day. If you’re dealing with thin, worn enamel in places and chips and rust in more than one place, we can normally put it right, on basins & shower trays, cast iron baths and pressed steel baths alike.
The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.
- Area
- Mislingford (PO17)
- Area hub
- Hampshire
- Cover
- One year on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Repairs by material
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Nearby places to Mislingford
Other services in Mislingford
For landlords and businesses
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
If you manage property in Mislingford, we will quote for several properties at once. Send pictures for each one and we’ll price them together.
What happens on the day
We agree an arrival time beforehand, so you are not left guessing. On site, it takes most of the day in most cases. We leave the room clean and ready to use once it has cured.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can normally be used the next day.
Getting ready for the visit
- Point us to the nearest place to park
- Keep pets and children out of the room while we work
- Clear the area around the damage
Getting a price
If you are in Mislingford and want a price, pictures are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Related advice
How we price bath re-enamelling
Resurfacing from £350. You won’t pay by the hour. The price is based on:
- Access to the area
- How many areas need work
- Any earlier repairs that need removing first
- How many items we do on one visit
A repair usually costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Quotes from your photos
Two or three clear pictures are typically enough. It helps if you send:
- Something in shot to show the size
- Good light, ideally daylight, without flash glare
- A wider photo showing the whole bath
- Details of any past repairs
The quickest way to a price is to send two or three photos through our quote form or call us. We’ll say immediately whether it can be repaired.
DIY repairs versus a professional job
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Aftercare tips
It’s all simple stuff, just a few sensible habits:
- Fix dripping taps quickly
- Avoid suction-cup mats
- Store bottles off the bath
- Wipe the bath dry after use in hard water areas
The first few days matter most: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
When we’d advise against a repair
We won’t take on work that will not last, so these are the limits:
- A metal bath with a through crack
- Plumbing leaks, which need a plumber
- A poorly supported acrylic bath, until it’s firmed up
If in doubt, send photos and we will say what we think.
Materials we work on in Mislingford
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
Common problems we fix in Mislingford
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
People generally call us after spotting something like this:
- An outdated colour you’d like to change
- Several chips and rust patches
- A bath that stays dull however much you clean it
- An old resurfacing that’s failing
What your quote should include
- Whether they match the colour on site
- The length of the guarantee and what it covers
- What prep work is covered
- Who will actually do the work
Mislingford and nearby
Mislingford is about 5 miles north of Fareham, in Hampshire. Anywhere in PO17, we come to you. Mislingford is one of 683 towns and villages in Hampshire where we work. We work right across the region, from Mislingford to London (61 miles away).
Our visits in PO17 are booked in the same way as anywhere else. Other places close to Mislingford include Kingsmead (1 mile south), Woodend (1 mile south-east), Hill Grove (1 mile north), Shirrell Heath (1 mile west) and Swanmore (1 mile north-west). Further out, we also cover Winchester (11 miles north-west), Gosport (9 miles south), Havant (9 miles south-east), Eastleigh (8 miles west), Fareham (5 miles south) and Horndean (7 miles east).
Around Mislingford
In Mislingford, that means homes near The Roebuck pub and Swanmore College of Technology, among other places. Mislingford’s nearest station is Botley station, about 4 miles west. Well-known places in the area include Knowle Hospital (3.6 miles south-west) and Bishop's Waltham Museum (2.7 miles north-west). For a walk, there is St Clair's Meadow.
About our accreditations · Every repair comes with a one-year guarantee.
