Hampshire · England
Bath Re-enamelling in Swanmore
Our technicians come to Swanmore for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- Stains that will not shift
- Lots of chips and rust spots

Bath re-enamelling at your home in Swanmore
Re-enamelling gives a worn bath a new glossy surface without a refit. It suits baths that are dull, stained, rough or chipped all over. Typical jobs include a bath in a colour that no longer suits and enamel that’s lost its shine and feels rough, on basins & shower trays, Victorian roll-tops and acrylic baths.
All our work is covered by a one-year guarantee.

- Area
- Swanmore (SO32)
- County
- Hampshire
- Cover
- 12 months on all our work
- Quotes
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
DIY repairs versus a professional job
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
Swanmore and nearby
Swanmore is about 6 miles east of Hedge End, in Hampshire. Clients in Swanmore get the same service as everywhere else we cover: a fixed quote from pictures, then a visit to do the work. We cover 683 places in Hampshire, from the larger towns to small villages. We work right across the region, from Swanmore to London (61 miles away).
Postcode districts we cover here: SO32. We regularly work on streets such as Church Road, Myers Close and Spring Vale and the roads around them. Nearby, we also work in Hill Grove (1 mile east), Upper Swanmore (1 mile north-east), Mislingford (1 mile south-east), Shirrell Heath (1 mile south) and Kingsmead (2 miles south-east). Within a short drive, we also cover Winchester (10 miles north-west), Gosport (10 miles south), Havant (10 miles south-east), Eastleigh (7 miles west), Fareham (6 miles south) and Horndean (8 miles east).
Local landmarks in Swanmore
We visit homes around Church of St Barnabas, Swanmore Church of England Aided Primary School and Swanmore College of Technology and the streets around them. The nearest railway station is Botley station, roughly 3.7 miles south-west of the centre. Further afield, we also cover the area around Bishop's Waltham Museum (1.7 miles north-west) and Knowle Hospital (4.3 miles south). Green spaces nearby include Beacon Hill and Bishops Waltham Branch LNR.
Places near Swanmore
More services for Swanmore
Common questions in Swanmore
Can you make a coloured bath white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
How soon can you come?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
Will there be a smell?
There can be some smell while we work, so we ventilate the room. It clears as the materials cure.
Do you cover the entire of Hampshire?
Across the UK. Our prices are the same everywhere.
Do I need to be at home?
Someone needs to let us in and show us the job. You don’t need to watch us work.
Will the price change on the day?
We will show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.
How much does bath re-enamelling cost in Swanmore?
Resurfacing from £350. Because every job differs, we price from pictures. You know the full cost before anything is booked.
How we price bath re-enamelling
Prices start from £350. We charge the same across the UK, including Swanmore. The price reflects:
- How easy the damage is to reach
- How hard the colour is to match
- How many items we do on one visit
- The type of damage
Set against the cost of replacement, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
How to get a fixed price
You can usually get a fixed price without us visiting. To make it quick:
- One sharp close-up of the damage
- Your postcode, so we can check dates
- Something in shot to show the size
- Any earlier repairs or coatings
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price.
Signs you need bath re-enamelling in Swanmore
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
These are the problems we’re asked about most:
- A coating lifting around the plughole
- Staining under the taps and around the waste
- Several chips and rust patches
- A bath in a colour that no longer suits
What your quote should include
- Whether a trained technician does the job
- How to care for the finish
- What happens if they find more damage
- How your room will be protected
Repairs by material
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Landlord and trade work in Swanmore
We carry out planned and one-off repairs for housing associations and facilities teams in Hampshire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
We work for landlords, letting agents and housing providers in Swanmore as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Why repair rather than replace?
Getting a cast iron bath out is hard work: they’re heavy, frequently need breaking up, and a new one isn’t cheap. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. Our prices are the same across the UK, so there’s no premium for Swanmore. The job itself decides the price: the material, the amount of damage and how many items.
Why us?
- Work done at your home or business
- Everything repaired in place
- We leave the room as we found it
- A fixed quote before you book
Read our pricing or bath cost comparison.
When we’d advise against a repair
Before you book, it’s worth knowing the limits too:
- A cast iron or steel bath that is cracked right through
- Anything hidden under an old coating, until we remove it
- Plumbing leaks, which need a plumber
Send us photos and we’ll tell you honestly.
What we work on
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
How it works
Nothing needs to be moved out of the room beforehand. Everything we use comes in the van with us, put protection down and get going once we’ve agreed what we are doing. It usually takes the best part of a day, and you are welcome to carry on with your day while we work.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Let us know which floor the room is on
- Have a window or extractor fan available
- Clear the area around the damage
Getting a price
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
Read more
About our accreditations · Every repair comes with a one-year guarantee.

