Powys · Wales
Bath re-enamelling & resurfacing in Moel y Garth, Powys
Bath re-enamelling in Moel y Garth without the cost of replacing. Get a fixed price from your photos, then we come to you.
- Resurfacing from £350
- A roll-top that’s seen better days
- An old resurfacing that is failing
Keeping it looking good
Most damage we see is avoidable. A few tips:
- Rinse off hair dye, oils and bath bombs right away
- Leave the bath for the full curing time before using it
- Never use suction bath mats
- Have chips seen to early
Stick to mild, non-abrasive cleaners, do not use suction bath mats, and keep bottles and razors off the surface.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Bath re-enamelling at your home in Moel y Garth
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, and we take our time over it. If you are dealing with a period or roll-top bath worth keeping and a bath that stays dull however much you clean it, we can help, whatever the material.
The work is covered for a year after we finish. Just call us if there’s a problem and we will come back.
- Area
- Moel y Garth (SY21)
- Region
- Powys
- Guarantee
- One year on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Should you replace it?
A replacement frequently means several trades over several days. Resurfacing takes one technician and normally a day, and the bath is usable the day after. Our bath re-enamelling starts from £350. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
What you get with us
- A fixed quote before you book
- Colour mixed on the day to match
- No need to remove anything
- CHAS and Constructionline accredited
See our prices page and bath cost comparison.
How we price bath re-enamelling
Resurfacing from £350. A fixed quote means you know the cost before booking. We take into account:
- The colour and finish to match
- Access to the area
- Previous DIY repairs that have to come out
- Whether it’s a chip, crack, burn or wear
Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Send pictures for a quote
When you take your photos, these tips help us give you a firm price:
- Something in shot to show the size
- Any earlier repairs or coatings
- Where you are, by postcode
- Good light, ideally daylight, without flash glare
Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and we’ll reply with a fixed price. There is no charge for the quote and you are under no obligation.
Materials and what they mean for the repair
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
What a repair can’t fix
We won’t take on work that won’t last, so these are the limits:
- An acrylic bath that flexes badly underfoot
- A bath split right through the body
- Leaks from fittings rather than the bath
Send us photos and we’ll tell you honestly.
Materials we repair
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
FAQs for Moel y Garth
Does re-enamelling smell?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It fades as the coating cures.
How long is the bath unusable?
Generally one day, with the bath ready the following day. Deeply pitted baths may need a second day.
Can you make a coloured bath white?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Do you work in Moel y Garth?
We do. We send a technician to Moel y Garth for every job, with no extra charge for travel.
Will you leave a mess?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
Do I have to be there?
Someone needs to let us in and show us the job. You do not need to watch us work.
What happens once I’ve sent pictures?
We come back with a fixed quote, plus dates. You are under no obligation.
How the visit works
Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, then carry out the work, which normally takes the best part of a day. If anything looks different from your photos, we will talk to you before going ahead.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the following day.
Getting ready for the visit
- Tell us about parking, stairs or access
- Tell us if there are stairs or a lift
- Point us to the nearest place to park
Ask for a price
Email us a photo of the damage and one of the whole item, with your SY21 postcode, and we’ll come back with a fixed quote.
Advice
About Moel y Garth
Moel y Garth is about 13 miles north-east of Y Drenewydd, in Powys. Our technicians come to clients in Moel y Garth and the surrounding area, so there is no workshop to go to. We work in all 234 towns and villages in Powys, from the larger towns to small villages. You can also see our page for Liverpool, about 51 miles away.
Here we cover the SY21 postcode area. If you are just outside Moel y Garth, we cover Groes-lwyd (1 mile north-east), Guilsfield (2 miles east), Cegidfa (2 miles north-east), Bron-y-Buckley (2 miles south-east) and Trelydan (2 miles east). Further out, we also cover Y Drenewydd (13 miles south-west), Newtown and Llanllwchaiarn (12 miles south-west), Penygloddfa (12 miles south-west), Pen-y-Glodfa (12 miles south-west), Bryn (12 miles south-west) and Garth Owen (13 miles south-west).
Local landmarks in Moel y Garth
The nearest railway station is Welshpool station, roughly 2.6 miles south-east of the centre. Nearby you will also find Victoria Memorial Hospital (2.3 miles south-east) and Powys Castle Museum (2.5 miles south-east). Not far away are Llyn Du and Bryn Fron-fawr.
Work for landlords and builders
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
We carry out planned and one-off repairs for housing associations and facilities teams in Powys and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
Also near Moel y Garth
Other services in Moel y Garth
About our accreditations · Every repair comes with a one-year guarantee.
