Northamptonshire · England
Bath re-enamelling & resurfacing in Mollington, Northamptonshire
Full bath re-enamelling and resurfacing for homes and businesses in Mollington and across Northamptonshire. Free, fixed quotes from your photos.
- Resurfacing from £350
- A roll-top that’s seen better days
- An outdated colour you’d like to change
What bath re-enamelling costs
Resurfacing from £350. We charge the same across the UK, including Mollington. The price reflects:
- How many areas need work
- Whether old repairs or coatings need taking off
- How hard the colour is to match
- The type of damage
Compared with replacing, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
How to get a fixed quote
When you take your photos, a few simple things make all the difference:
- Any details about the material
- Something in shot to show the size
- Your postcode, so we can check dates
- A close-up of the damage, in focus
You do not need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
Bath re-enamelling in Mollington, done in place
The bath stays where it is, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, and can be used again the day after. We work on Victorian roll-tops, basins & shower trays and pressed steel baths, and the jobs we see most are brown or grey marks that don’t clean off and worn patches where water runs and sits.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before booking.
- Area
- Mollington (OX17)
- Area hub
- Northamptonshire
- Guarantee
- A year, on every repair
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
DIY kit or professional repair?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
Nearby places to Mollington
Also in Mollington
Covering Mollington
Mollington is about 4 miles north of Banbury, in Northamptonshire. Jobs in Mollington are booked in like any other job: a fixed quote from your photos, then a visit to do the work. Our technicians cover 364 places in Northamptonshire. We work right across the region, from Mollington to Birmingham (about 33 miles away).
Jobs in OX17 are booked in the same way as anywhere else. Jobs here include addresses on Main Street, Lower Farm Lane and Church Lane. We also cover the places around Mollington: Shotteswell (1 mile south-west), Great Bourton (2 miles south-east), Farnborough (2 miles north), Cropredy (2 miles east) and Claydon (2 miles north-east). Within a short drive, we also cover Daventry (13 miles north-east), Brackley (11 miles south-east), Everdon (14 miles north-east), Middleton Cheney (5 miles south-east), Hinton (7 miles north-east) and Silverstone (14 miles east).
Local landmarks in Mollington
We visit homes around Church of All Saints and The Green Man Public House and the streets around them. The nearest railway station is Banbury station, roughly 4.5 miles south. Other landmarks nearby include Hanwell Castle (2.4 miles south) and Horton General Hospital (4.9 miles south). The countryside around Mollington includes Boddington Meadow and Edge Hill.
How the visit works
Here’s how a visit typically runs: we arrive on time, protect everything around the work area, do the job and tidy away. Allow a full day from start to finish. Before we go, we’ll explain how long to leave it and how to look after it.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the next day.
Before we arrive
- Let us know about parking or access
- Let the surface dry out before the visit
- Have somewhere for us to park nearby if possible
Ask for a price
Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you’ll get a fixed price back. Quotes are free and no obligation.
Related advice
Repair or replace: which is better?
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Our bath re-enamelling starts from £350. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
What you get with us
- Everything repaired in place
- Normally one visit, start to finish
- We leave the room as we found it
- Colour-matched on site
Take a look at our pricing or guide to resurfacing and replacement costs.
When to call us in Mollington
Often the bath has just had decades of use, and only the surface is worn. The body of the bath is generally perfectly sound.
Look out for any of the following:
- Staining under the taps and around the waste
- A coloured bath you want in white
- Lots of chips and rust spots
- Wear marks under the taps
What your quote should include
- When it can be used again
- How long the guarantee is and what it covers
- Whether there are any call-out or travel charges
- Who turns up on the day
What we can’t put right
Not everything can be repaired, and we would rather say so up front. Repairs won’t solve:
- A cast iron or steel bath that’s cracked right through
- Leaking taps or wastes (a plumber’s job)
- Problems we can’t see until an old finish comes off
If in doubt, send pictures and we will say what we think before booking.
Materials we repair
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
Landlords, agents and businesses in Mollington
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.
Builders use us to fix snagging damage before handover. We can visit several plots in one trip to keep costs down.
How to look after the repair
Much of the damage we repair could have been avoided. These habits help:
- Stick to gentle, non-abrasive cleaners
- Respect the curing time we give you
- Store bottles off the bath
- Avoid suction-cup mats
The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Questions from Mollington
Is it worth repairing rather than replacing?
Generally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
Will the new finish last?
Look after it and it lasts. Avoid abrasive cleaners and suction mats.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit usually costs less than separate visits. Include photos of each item.
Can you fix a peeling bath coating?
Normally, yes. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
What if the damage is worse than the photos show?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
About our accreditations · Every repair comes with a one-year guarantee.
