Northamptonshire · England
Bath re-enamelling & resurfacing in Everdon, Northamptonshire
Problem with your bath in Everdon? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- A bath in a colour that no longer suits
- A peeling or bubbling previous coating
About our bath re-enamelling in Everdon
Resurfacing renews the entire surface of the bath without taking anything out. It suits baths that are dull, stained, rough or chipped all over. Whether it’s a bath in a colour that no longer suits and worn patches where water runs and sits, we can generally put it right, whatever the material.
You are covered after we leave: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Area
- Everdon (NN11)
- County
- Northamptonshire
- Guarantee
- 12 months on all our work
- Quote
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Do you need bath re-enamelling in Everdon?
Enamel wears gradually. Abrasive cleaners, limescale and years of use dull the surface, normally first under the taps and around the waste.
Look out for these signs:
- Brown or grey marks that don’t clean off
- An old resurfacing that is failing
- A dull, rough surface that will not come clean
- Thin, worn enamel in places
Questions to ask before you book
- Aftercare advice
- What protection goes down before work starts
- What the guarantee covers, and for how long
- Whether there are any call-out or travel charges
For landlords and businesses
Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
The process
We turn up when we said we would and checks the damage against your photos first. The floor and nearby surfaces are covered before we open a single tin. Most visits take a full day, and we leave the room as we found it.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the day after.
Getting ready for the visit
- Clear toiletries, mats and anything else from around the area
- Keep pets and children out of the room while we work
- Mention any parking restrictions or tricky access
Ask for a price
Most customers in Everdon get their price from pictures. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Related advice
Everdon questions
It’s been repaired before. Can you still fix it?
Most of the time. Let us know what was used before and we’ll plan for it.
Do you work for landlords and businesses?
We do, regularly. We can quote for several properties together and work between tenancies.
Do I need to be at home?
We need someone to let us in. You do not need to watch us work.
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.
Can you change the colour of my bath?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Do the materials smell?
There can be some smell while we work, so we ventilate the room. It fades as everything cures.
What areas do you cover?
The whole UK, including all of Northamptonshire. Send your postcode with your photos and we’ll confirm dates.
How do I get a price for bath re-enamelling in Everdon?
Resurfacing from £350. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
What your bath is made of matters
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel frequently rusts by the plughole, so we check it carefully.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.
Our work in Everdon
Everdon is about 1 mile north of Daventry, in Northamptonshire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Everdon is one of 364 places in Northamptonshire we cover. We work right across the region, from Everdon to Birmingham (34 miles away).
Our visits in NN11 work the same way as everywhere else we cover. That includes homes on Ashby Road, Welton Lane and Harrow Lane. Nearby, we also work in Welton (1 mile north-east), Daventry (1 mile south), Drayton (2 miles south-west), Norton (2 miles south-east) and Long Buckby Wharf (2 miles east). We also work in nearby towns such as Northampton (12 miles east), Towcester (13 miles south-east), Moulton (13 miles east), East Hunsbury (12 miles south-east), Wootton (13 miles south-east) and White Hills (11 miles east).
Near you in Everdon
Our clients here include homes close to Daventry Country Park, The White Horse pub and Church of St Martin. Also close by are The Parker E-ACT Academy (1 mile south) and Ashby Fields Primary School (under half a mile south). Everdon’s nearest station is Long Buckby station, about 3.3 miles east. A little further out are Daventry Museum (1.5 miles south) and Long Buckby (3.6 miles north-east). Green spaces nearby include Badby Wood and Borough Hill.
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
What else we do in Everdon
Should you replace it?
Replacing a bath usually involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and usually one day, with the bath ready the next day. Resurfacing from £350, with every job priced individually. Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
What you get with us
- Technicians who travel to you, UK-wide
- Colours mixed by hand to suit your surface
- Everything repaired in place
- Rooms protected and left tidy
Take a look at our full price list and guide to resurfacing and replacement costs.
How we price bath re-enamelling
Prices start from £350. Each job gets its own fixed quote. This is what makes a difference:
- How many items we do on one visit
- How much damage there is
- Previous DIY repairs that have to come out
- The material and finish
Set against the cost of replacement, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Quotes from your pictures
Almost every job we do is priced from pictures. This is what we need:
- Natural light rather than flash
- Something in shot to show the size
- A clear, close picture of the problem area
- Whether it’s been repaired or coated before
The quickest way to a price is to send two or three pictures through our quote form or call us. We will say immediately whether it can be repaired.
When a repair isn’t the answer
A repair is not right for every job, for example:
- Steel that has corroded right through
- Anything hidden under an old coating, until we remove it
- A poorly supported acrylic bath, until it’s firmed up
If in doubt, send pictures and we will say what we think.
Surfaces we repair
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
About our accreditations · Every repair comes with a one-year guarantee.
