Isle of Anglesey · Wales

Bath Re-enamelling for Mona homes

Bath re-enamelling for Mona, without a refit. Send us pictures for a fixed quote, then we come to you.

  • Resurfacing from £350
  • Stains that will not shift
  • A dull, rough surface that won’t come clean
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling near Mona

Bath re-enamelling at your home in Mona

We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, so we don’t cut corners on it. Common call-outs are for a peeling or bubbling previous coating and a roll-top that’s seen better days, on acrylic baths, Victorian roll-tops and pressed steel baths.

You’re covered for a year from the day of the repair. Just call us if there is a problem and we will come back.

Location
Mona (LL65, LL77)
County
Isle of Anglesey
Cover
One year on every repair
Quote
From £350. Free, fixed quote from pictures
Phone
0345 017 0787
Updated
23 October 2026
Basin with yellowed glaze resurfaced to a clean white finish

Your questions about bath re-enamelling in Mona

How soon can you come?

It depends on the time of year and where you are. We’ll offer you dates when we send your quote.

Is it safe with children and pets around?

Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.

Is there any odour?

Expect a mild smell while we are working, which fades afterwards.

What happens once I’ve sent pictures?

You get a fixed quote and available dates. If we need another angle, we’ll ask.

What information do you need?

Some pictures, your postcode and how to reach you. On the day, access to the room.

How long does re-enamelling last?

It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.

Can I add another job to the visit?

Yes. Doing several items on one visit generally costs less than separate visits. Include pictures of each item.

Can you do the outside of a roll-top?

Yes. We can do the inside and outside.

Repairs by material

Cast iron

A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.

What a repair can’t fix

It helps to know what we can’t do:

  • A bath that’s rusted through
  • Leaking taps or wastes (a plumber’s job)
  • Damage hidden under a previous coating, until it’s stripped back

Send us photos and we will tell you honestly.

Materials we work on in Mona

  • Victorian roll-tops
  • Pressed steel baths
  • Acrylic baths
  • Basins & shower trays
  • Cast iron baths

Can I fix it myself?

We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.

If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.

Work for landlords and builders

Letting agents often send us photos straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.

We carry out planned and one-off repairs for housing associations and facilities teams in Isle of Anglesey and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

Signs you need bath re-enamelling in Mona

A dull surface stains and holds dirt, and cleaning harder only makes it worse. That is the point where re-enamelling makes sense.

Common reasons people in Mona contact us are:

  • Staining under the taps and around the waste
  • An old resurfacing that’s failing
  • An original cast iron bath that needs restoring
  • Chips and rust in more than one place

Comparing quotes

  • Whether they match the colour on site
  • What aftercare is recommended
  • How long the guarantee is and what it covers
  • What preparation is included

Our hiring checklist

Looking after it afterwards

So the finish stays in good condition for years:

  • Wipe the bath dry after use in hard water areas
  • Clean with a soft cloth and mild detergent
  • Have chips seen to early
  • Respect the curing time we give you

Wipe the bath dry after use where you can, and rinse off any bath products.

Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.

How the visit works

Your technician turns up at the time we agreed with you and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. The work itself takes the best part of a day, and we leave the room as we found it.

  1. The room is masked, protected and ventilated.
  2. The bath is cleaned, degreased and any chips or rust repaired.
  3. We key the surface and put on a bonding primer.
  4. Several coats of new finish are sprayed on.
  5. The bath is left to cure and can usually be used the day after.

Before we arrive

  • Open a window if you can
  • Tell us if there are stairs or a lift
  • Tell us about any previous repairs or coatings

Getting a price

To get a price, send a couple of pictures through our quote form or ring us. We’ll say immediately if a repair is the right fix.

Get a free quote

Related advice

About Mona

Mona is about 10 miles west of Bangor, in Isle of Anglesey. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Mona is one of 115 places in Isle of Anglesey we cover. We work right across the region, from Mona to Liverpool (60 miles away).

Our repair technicians cover all of LL65 and LL77 and the streets around it. Streets in the area include Ffordd Caergybi and Mona Industrial Park, and we cover them all. If you’re just outside Mona, we cover Heneglwys (1 mile north), Bodffordd (1 mile north), Rhostrehwfa (1 mile south-east), Llangristiolus (1 mile south-east) and Llangefni (2 miles east). We also work in nearby towns such as Holyhead (12 miles west), Blackbridge (11 miles west), Porth-y-Felin (12 miles west), Menai Bridge (8 miles east), Stryd (12 miles west) and Porthaethwy (8 miles east).

Near you in Mona

Locally, our jobs take us to homes close to St Llwydian's Church and Parc Henbias. The nearest railway station is Bodorgan station, about 4 miles south-west of the centre. Well-known places in the area include Ynys Cefni (2.5 miles east) and Cefni Hospital (2.6 miles east). The countryside around Mona includes The Dingle and Llyn Hendref.

Map of Mona © OpenStreetMap contributors

Repair or replace in Mona?

If the bath is sound, re-enamelling is normally much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Prices start from £350. A repair is priced on what needs doing, not your postcode. You will see the full price before booking, with nothing added on the day.

Why book with us

  • One-year guarantee on every repair
  • Nothing taken out or refitted
  • CHAS, Constructionline and SafeContractor accredited
  • Rooms protected and left tidy

Read our full price list and bath cost comparison.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.