Northamptonshire · England
Bath re-enamelling & resurfacing in Moor End, Northamptonshire
Problem with your bath in Moor End? We repair it in place, match it on site and guarantee the work for a year.
- Resurfacing from £350
- Worn patches where water runs and sits
- An old resurfacing that is failing
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
Bath re-enamelling in Moor End without replacing anything
We don’t move the bath, so your taps, tiles and plumbing are left alone. It generally takes one visit, with the bath ready to use the following day. We work on cast iron baths, pressed steel baths and basins & shower trays, and the jobs we see most are staining under the taps and around the waste and wear marks under the taps.
Big or small, you get the same one-year guarantee in Moor End and across Northamptonshire.
- Where
- Moor End (NN12)
- Area hub
- Northamptonshire
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
The process
Visits start with a quick look at the job together, so there are no surprises. After that, protection goes down around the work area and the work begins. Allow a full day, and we will tell you if anything changes.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- The bath is left to cure and can typically be used the day after.
Preparing for the visit
- Tell us if there are stairs or a lift
- Mention any earlier repairs or resurfacing
- Let the surface dry out before the visit
Get a quote
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them over. What comes back is a fixed quote, not a guess.
Related advice
What we cannot put right
Some problems need a builder, plumber or fitter rather than us:
- Leaks from fittings rather than the bath
- A bath split right through the body
- A bath that is rusted through
Send us photos and we will tell you honestly before booking.
Materials we repair
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
What affects the price in Moor End
Prices start from £350. There are no hourly rates or hidden extras. The price depends on:
- Doing more than one item at once
- Whether it’s a chip, crack, burn or wear
- The size and number of damaged areas
- What the surface is made of
A repair is priced on what needs doing, not where you live. You will see the full price before booking.
Quotes from your pictures
We price nearly every job from pictures. This is what we need:
- A close-up of the damage, in focus
- Good light, ideally daylight, without flash glare
- The material, if you know it
- Where you are, by postcode
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Covering Moor End
Moor End is about 4 miles south-east of Towcester, in Northamptonshire. We travel to homes and businesses in Moor End and the surrounding area, so there’s no workshop to go to. Moor End is one of 364 towns and villages in Northamptonshire where we work. You can also see our page for Birmingham, about 49 miles away.
Here we cover the NN12 postcode area. Close by, we cover Yardley Gobion (1 mile east), Potterspury (1 mile south), Cosgrove (3 miles south-east), Old Stratford (3 miles south-east) and Castlethorpe (3 miles east). Larger places within reach include Northampton (11 miles north), Brackley (11 miles west), Towcester (4 miles north-west), Wolverton (4 miles south-east), Stony Stratford (3 miles south-east) and Moulton (14 miles north).
Near you in Moor End
Typical jobs here are in homes near The Old Talbot Public House, Church of St Leonard and Yardley Gobion Church of England Primary School and the streets around them. The closest station to Moor End is Wolverton station, about 4.4 miles south-east. The countryside around Moor End includes Grafton Regis Meadow.
Common problems we fix in Moor End
Older baths often have several problems at once: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
The most common problems we’re called about are:
- Wear marks under the taps
- Staining under the taps and around the waste
- A peeling or bubbling previous coating
- A roll-top that’s seen better days
What your quote should include
- Whether a trained technician does the job
- Whether the price is fixed and includes VAT
- How your room will be protected
- How long it needs to cure
Repairing versus replacing in Moor End
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Prices start from £350. There are no surprise extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
What you get with us
- Typically one visit, start to finish
- Dust sheets down, tidy finish
- CHAS and Constructionline accredited
- Work done at your home or business
Take a look at our pricing and guide to resurfacing and replacement costs.
Towns and villages near Moor End
More services for Moor End
For landlords and businesses
For anyone letting property in or around Moor End, we can repair and quote for several addresses together. Send pictures for each one and we will price them together.
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Moor End: your questions answered
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children.
I’m a tenant. Can you help?
Of course. Check with your landlord; we can send the quote to them too.
Can you repair something that’s been repaired before?
Most of the time. Tell us what was done before and we will plan for it.
Can I get a quote without a visit?
In nearly every case. If pictures don’t show enough, we’ll ask for another angle.
Can you make a coloured bath white?
Yes, white is the usual choice. Mention the colour you want when you send pictures.
Is it worth repairing rather than replacing?
Usually, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
What if the damage is worse than the pictures show?
We stop, show you and agree any change before carrying on. You will not be charged for anything you haven’t agreed.
Does re-enamelling smell?
Yes, while we are applying the finish. Ventilation keeps it down, and it fades as the finish cures.
How to care for the repair
Simple care helps the repair last. We recommend:
- Wipe the bath dry after use in hard water areas
- Do not let dyes or oils sit on the finish
- Clean with a soft cloth and mild detergent
- Repair dripping taps early
Dry the bath after use if possible, especially in hard water areas, and rinse off any bath products.
Rust spots on a worn bath get worse with time and make the job bigger. Resurfacing before they spread keeps it simpler.
About our accreditations · Every repair comes with a one-year guarantee.
