Warrington · England
Bath Re-enamelling in Moore
Bath re-enamelling across Moore and nearby, normally in one visit and guaranteed for a year.
- Resurfacing from £350
- An outdated colour you’d like to change
- A roll-top that’s seen better days
Moore questions
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside.
Will there be fumes?
Yes, while we’re applying the finish. We set up ventilation and the smell fades as it cures.
Can you price it without visiting?
In nearly every case. If photos don’t show enough, we will ask for another angle.
Can you fix a peeling bath coating?
In most cases. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
What areas do you cover?
We work UK-wide. Prices don’t change with location.
Will the bath be moved?
No. We resurface it in place, so the tiles and taps stay put.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
What do you need from me?
Use the quote form or ring 0345 017 0787, and we’ll take it from there.
Bath re-enamelling in Moore, done in place
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. We are often asked to fix worn patches where water runs and sits and a bath in a colour that no longer suits, in pressed steel baths, acrylic baths and basins & shower trays.
You’re covered after we leave: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Location
- Moore (WA4)
- County
- Warrington
- Warranty
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
How we price bath re-enamelling
Prices start from £350. There is no area surcharge for Moore. What changes the price is:
- Whether it’s a chip, crack, burn or wear
- How many areas need work
- Unusual colours or finishes
- Access to the area
Rather than charging by the hour, we price the whole job up front. Damage, material and access decide it, and doing several items at once reduces it.
Quotes from your pictures
Before you send pictures, a few simple things make all the difference:
- The material, if you know it
- A clear, close picture of the problem area
- A coin beside the damage so we can judge size
- A picture taken from further back
There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
What happens on the day
We turn up when we said we would, introduces themselves and checks the damage against your photos first. The floor and nearby surfaces are covered before any work starts. The work itself takes most of the day, and the room is left clean and tidy.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can generally be used the next day.
Before we arrive
- Keep pets and children out of the room while we work
- Let us know which floor the room is on
- Mention any earlier repairs or resurfacing
Ask for a price
Send us photos of the damage and a wider shot of the whole item, with your WA4 postcode, and we will reply with a fixed quote.
Advice
Signs you need bath re-enamelling in Moore
A dull surface stains and holds dirt, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
Contact us if you’ve noticed:
- A coloured bath you want in white
- A period or roll-top bath worth keeping
- Stains that will not shift
- A peeling or bubbling previous coating
Questions to ask before booking
- How your room will be protected
- What happens if they find more damage
- The length of the guarantee and what it covers
- Whether the colour is mixed to match
Moore and nearby
Moore is about 3 miles north-east of Runcorn, in Warrington. Our repair technicians come to clients in Moore, so there is no workshop to go to. Moore is one of 72 places in Warrington we cover. We work right across the region, from Moore to Liverpool (12 miles away).
Here we cover the WA4 postcode area. We regularly work on streets such as Lindfield Close, Runcorn Road and Beechmoore. If you’re just outside Moore, we cover Keckwick (1 mile south-west), Moss Side (1 mile north-west), Higher Walton (1 mile east), Daresbury (1 mile south) and Sandymoor (1 mile south-west). Larger places within reach include Warrington (4 miles north-east), Golborne (9 miles north), Lymm (7 miles east), Fearnhead (5 miles north-east), Wilderspool (3 miles north-east) and Lowton (9 miles north).
What’s near Moore
In Moore, that means homes near Sandymoor School, Morley Common and All Saints' Church, among other places. Other local landmarks include Moore Primary School (under half a mile west) and The Red Lion Public House (within half a mile south-east). For rail, the closest station is Runcorn East station, roughly 2.1 miles south-west. A little further out are Halton Castle (2.8 miles south-west) and Museum of Policing in Cheshire (2.7 miles north-east). The countryside around Moore includes Paddington Meadows.
Keeping it looking good
Once the work has cured, treat it gently:
- Have chips seen to early
- Fix dripping taps quickly
- Don’t use the bath until it has fully cured
- A quick wipe after use keeps limescale away
Use mild, non-abrasive cleaners, avoid suction bath mats, and don’t leave bottles or razors standing on the surface.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Places near Moore
Also in Moore
DIY kit or professional repair?
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Should you replace it?
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Nothing else is disturbed. Our bath re-enamelling starts from £350. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why choose Surface Doctor in Moore
- Usually one visit, start to finish
- We come to you, anywhere in the UK
- Free fixed quotes from pictures
- We leave the room as we found it
Read our prices page or resurfacing vs replacement cost guide.
Different materials, different repairs
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
When a repair is not the answer
In fairness, there are a few things a repair will not fix:
- A bath split right through the body
- Anything hidden under an old coating, until we remove it
- Plumbing leaks, which need a plumber
If in doubt, send photos and we’ll say what we think before you book.
Surfaces we repair
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Basins & shower trays
About our accreditations · Every repair comes with a one-year guarantee.
