Warrington · England
Bath Re-enamelling for Wilderspool homes
Fixed-price bath re-enamelling in Wilderspool and the surrounding area, done in a single visit in most cases.
- Resurfacing from £350
- Enamel that is lost its shine and feels rough
- Worn patches where water runs and sits
What we do, step by step
Here’s how a visit generally runs: we arrive at the agreed slot, protect everything around the work area, carry out the work and clear up. Allow the best part of a day from start to finish. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Keep a parking space free if you can
- Let the surface dry out before the visit
- Let us know which floor the room is on
How to get a price
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and you’ll get a fixed quote back. There’s no charge for the quote and no obligation.
Advice
Bath re-enamelling in Wilderspool, done in place
After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. Typical jobs include wear marks under the taps and an outdated colour you’d like to change, in acrylic baths, Victorian roll-tops and basins & shower trays.
A one-year guarantee comes as standard, so you’re covered after the visit.
- Location
- Wilderspool (WA4, WA1)
- Region
- Warrington
- Cover
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Nearby places to Wilderspool
Also in Wilderspool
Do you need bath re-enamelling in Wilderspool?
Many baths we resurface have simply been well used, with nothing wrong except the surface. The body of the bath is usually perfectly sound.
Common reasons people in Wilderspool contact us include:
- Wear marks under the taps
- Chips and rust in more than one place
- Stains that won’t shift
- An original cast iron bath that needs restoring
Before booking anyone
- What the guarantee covers, and for how long
- What preparation is included
- When it can be used again
- A fixed price, and whether VAT is included
When we would advise against a repair
It helps to know what we cannot do:
- A cast iron or steel bath that’s cracked right through
- Steel that has corroded right through
- An acrylic bath that flexes badly underfoot
Not sure? Send photos and we will give you a straight answer before booking.
Surfaces we repair
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
Looking after it afterwards
Much of the damage we repair could have been avoided. These habits help:
- A dripping tap should be fixed promptly
- Keep suction mats out of the bath
- Rinse off hair dye, oils and bath bombs immediately
- Dry the bath after use to stop limescale
Wipe the bath dry after use where you can, particularly with hard water, and rinse away any product left on the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
Materials and what they mean for the repair
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is what we repair.
Why repair rather than replace?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed quote from your photos, so there are no surprises on the day.
What you get with us
- Everything repaired in place
- Rooms protected and left tidy
- We come to you, anywhere in the UK
- Fixed prices from your pictures
Read our pricing or bath cost comparison.
Landlords, agents and businesses in Wilderspool
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Our work in Wilderspool
Wilderspool is about 1 mile south of Warrington, in Warrington. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Wilderspool is one of 72 towns and villages in Warrington where we work. We work right across the region, from Wilderspool to Liverpool (about 14 miles away).
Here we cover the WA4 and WA1 postcode area. We regularly work on streets such as New Road, Manx Road and River Road and the roads around them. You’ll find Wilderspool on the A49 and A5060, so it’s easy for us to reach. Nearby, we also work in Stockton Heath (1 mile south-east), Latchford (1 mile east), Warrington (1 mile north), Westy (1 mile east) and Grappenhall (2 miles east). Within a short drive, we also cover Golborne (7 miles north), Lymm (5 miles east), Fearnhead (3 miles north-east), Lowton (6 miles north), Culcheth (6 miles north-east) and Westbrook (3 miles north-west). Wilderspool is among the bigger towns we cover in Warrington.
Near you in Wilderspool
Typical jobs here are in homes near Latchford CofE Primary School, UTC Warrington and The Feathers Public House, among other places. You will also find Church of St James (within half a mile north-west), Priestley College (under half a mile north-east) and Causeway Park (under half a mile north-west). The closest station to Wilderspool is Warrington Bank Quay station, about 0.9 miles north-west of the centre. Nearby you’ll also find Warrington Hospital (1.5 miles north-west) and Cockhedge Shopping Centre (0.9 miles north). Open spaces near Wilderspool include Paddington Meadows.
What bath re-enamelling costs
Prices start from £350. You will know the full cost before you book. We look at:
- How many areas need work
- Previous DIY repairs that have to come out
- What kind of damage it is
- The colour and finish to match
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you’ll get a fixed figure.
Quotes from your pictures
Before you send pictures, a few simple things make all the difference:
- One picture of the whole bath
- The postcode, so we can plan the visit
- Details of any past repairs
- Good light, ideally daylight, without flash glare
We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.
Wilderspool: your questions answered
Which areas do you work in?
We cover the entire UK, including Wilderspool and the rest of Warrington. Send your postcode with your photos and we will confirm dates.
Will you leave a mess?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
Will the price change on the day?
If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.
I rent my home. Can I book you?
Of course. Check with your landlord; we can send the quote to them too.
How do I get a price for bath re-enamelling in Wilderspool?
Resurfacing from £350. Because every job differs, we price from pictures. You’ll get a fixed figure before you book.
Is it worth repairing rather than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we will tell you.
Can you repair something that’s been repaired before?
Most of the time. Let us know what was used before.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
About our accreditations · Every repair comes with a one-year guarantee.
