Derbyshire · England
Bath re-enamelling & resurfacing in Moorend, Derbyshire
Bath re-enamelling in and around Moorend: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Lots of chips and rust spots
About our bath re-enamelling in Moorend
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. Typical jobs include staining under the taps and around the waste and lots of chips and rust spots, across acrylic baths, Victorian roll-tops and cast iron baths.
You are covered for a year from the day of the repair. Just call us if there is a problem and we’ll sort it.
- Area
- Moorend (DE6)
- Region
- Derbyshire
- Warranty
- One year on every repair
- Quote
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Prices and what affects them
Prices start from £350. Prices are worked out job by job, from your pictures. The main factors are:
- Unusual colours or finishes
- Any earlier repairs that need removing first
- How many areas need work
- Doing more than one item at once
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we will give you the exact figure.
Send photos for a quote
When you take your photos, a few simple things make all the difference:
- Any details about the material
- A coin beside the damage so we can judge size
- The postcode, so we can plan the visit
- One picture of the whole bath
Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and you will get a fixed price back. There is no charge for the quote and no obligation.
About Moorend
Moorend is about 9 miles west of Belper, in Derbyshire. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Moorend is one of 532 places in Derbyshire we cover. We work right across the region, from Moorend to Birmingham (38 miles away).
Here we cover the DE6 postcode area. We also travel to Bradley (1 mile north-east), Hulland (2 miles north-east), Atlow (2 miles north-east), Hulland Ward (3 miles east) and Upper Biggin (3 miles north-east). We also work in nearby towns such as Ilkeston (15 miles east), Belper (9 miles east), Heanor (14 miles east), Ripley (12 miles east), Langley Mill (14 miles east) and Matlock (11 miles north-east).
What’s near Moorend
We visit homes around Queen Elizabeth's Grammar School, Church of All Saints and Bradley CofE Primary School and the streets around them. Further afield, we also cover the area around Hamilton House Toy Museum (2.5 miles west) and St Oswalds Hospital (2.7 miles west).
- Other local spots include Ashbourne Rural District (2.4 miles west)
Looking after it afterwards
Nothing complicated is needed, just a few sensible habits:
- Respect the curing time we give you
- Keep toiletries on a shelf rather than in the bath
- Keep suction mats out of the bath
- Rinse off hair dye, oils and bath bombs immediately
Use mild, non-abrasive cleaners, don’t use suction bath mats, and keep bottles and razors off the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
For landlords and businesses
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we’ll handle the rest.
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
How it works
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job typically takes the best part of a day. We clean up when we are done and tell you when it’s ready to use.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the next day.
How to prepare
- Ensure the room can be ventilated
- Move bottles, mats and clutter away from the area
- Point us to the nearest place to park
Ask for a price
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Advice
Nearby places to Moorend
Other services in Moorend
What we are called out for in Moorend
Enamel does not fail overnight. Abrasive cleaners, limescale and years of use wear the gloss away, starting where water runs and sits.
People typically call us when they notice one of these:
- Lots of chips and rust spots
- An outdated colour you’d like to change
- An original cast iron bath that needs restoring
- Enamel that is lost its shine and feels rough
What to look for in a quote
- How long the guarantee is and what it covers
- Whether there are any call-out or travel charges
- Whether a trained technician does the job
- What preparation is included
Repair or replace: which is better?
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Our bath re-enamelling starts from £350. Set against the cost of replacement, a repair is usually a fraction of the price, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why Moorend clients choose us
- Colour-matched on site
- Free fixed quotes from pictures
- We’ll tell you if it’s not worth repairing
- Everything repaired in place
See our full price list or guide to resurfacing and replacement costs.
Your questions about bath re-enamelling in Moorend
Is there any odour?
It depends on the job, but often a little. Ventilation keeps it to a minimum.
Can you make a coloured bath white?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Is my repair covered?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work and until it has cured. Everywhere else in the home is fine.
When can you do it?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
How do I get a price for bath re-enamelling in Moorend?
Prices start from £350. We give a fixed price based on photos of the damage. Send a close-up and a picture of the whole item and your postcode.
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
What your bath is made of matters
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is what we repair.
About our accreditations · Every repair comes with a one-year guarantee.
