Stockport · England
Bath re-enamelling & resurfacing in Moorend, Stockport
Bath re-enamelling in and around Moorend: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- A bath in a colour that no longer suits
- Brown or grey marks that don’t clean off
When to call us in Moorend
Enamel doesn’t fail overnight. Years of cleaning, hard water and hot baths dull the surface, starting where water runs and sits.
You may need us if you’ve spotted:
- A peeling or bubbling previous coating
- An original cast iron bath that needs restoring
- A coloured bath you want in white
- Staining under the taps and around the waste
Comparing quotes
- What preparation is included
- What happens if they find more damage
- Whether they match the colour on site
- Whether there are any call-out or travel charges
How we handle bath re-enamelling in Moorend
Resurfacing renews the whole surface of the bath without a refit. It suits baths that are dull, stained, rough or chipped all over. Our technicians work on cast iron baths, acrylic baths and Victorian roll-tops, and people most often call us about an original cast iron bath that needs restoring and several chips and rust patches.
Peace of mind is built in: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Where
- Moorend (SK6)
- County
- Stockport
- Guarantee
- One year on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Landlords, agents and businesses in Moorend
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Builders use us to fix snagging damage before handover. We can visit several plots in one trip.
Materials and what they mean for the repair
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
Aftercare tips
Once the work has cured, treat it gently:
- Dry the bath after use to stop limescale
- Never use suction bath mats
- Stick to gentle, non-abrasive cleaners
- Have chips seen to early
Use mild, non-abrasive cleaners, avoid suction bath mats, and don’t leave bottles or razors standing on the surface.
Rust spots on a worn bath get worse with time and make the job bigger. It’s simpler to resurface before they spread.
How we price bath re-enamelling
Prices start from £350. Each job gets its own fixed quote. This is what makes a difference:
- Any earlier repairs that need removing first
- How many areas need work
- What the surface is made of
- Whether we combine several jobs
Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access.
Send photos for a quote
We price nearly every job from photos. This is what we need:
- A coin or ruler next to the damage for scale
- A wider photo showing the whole bath
- Any earlier repairs or coatings
- Your postcode, so we can check dates
Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and we’ll reply with a fixed quote. There’s no charge for the quote and no obligation.
Honest limits
In fairness, some problems need a different fix:
- Steel that has corroded right through
- A cast iron or steel bath that’s cracked right through
- Damage hidden under a previous coating, until it’s stripped back
If in doubt, send pictures and we’ll say what we think.
What we work on
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Acrylic baths
The process
Nothing needs to be moved out of the room beforehand. Everything we use comes in the van with us, put protection down and get going once we’ve agreed what we’re doing. Most jobs take the best part of a day, and you are welcome to carry on with your day while we work.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the day after, the bath is ready.
Getting ready for the visit
- Make sure the area is dry
- Open a window if you can
- Mention any parking restrictions or tricky access
Ask for a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can price the job without visiting.
Read more
Moorend and nearby
Moorend is about 2 miles east of Marple, in Stockport. Book a date that suits you, and we’ll give you an arrival time in advance, so you are not left waiting in all day. We cover all 42 towns and villages across Stockport, from the larger towns to small villages. Our nearest city page is Manchester, about 10 miles away.
Every address in SK6 is covered, from the main roads to the quietest streets. Whether you live on Gibb Lane, Church Road and Podnor Lane or a nearby road, we can come to you. Neighbouring places we cover include Mellor (1 mile west), Whitle (1 mile south-east), Strines (1 mile south-west), Marpleridge (2 miles south-west) and Hague Bar (2 miles south). We also work in nearby towns such as Stockport (6 miles west), Cheadle Hulme (7 miles west), Burnage (8 miles west), Hazel Grove (4 miles west), Bramhall (6 miles west) and Reddish (7 miles north-west).
What’s near Moorend
Typical jobs here are in homes near New Mills School, Mellor Primary School and Devonshire Arms and the streets around them. You’ll also find Brabyns Park (1.8 miles north-west) and St. Thomas' Church (within half a mile north-west). Moorend’s nearest station is Strines station, about 1.4 miles south-west. Further afield, we also cover the area around Stepping Hill Hospital (4.7 miles west). Not far away are Lantern Pike.
FAQs for Moorend
Someone resurfaced my bath and it’s peeling. Can you help?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Will there be fumes?
Some odour is normal while we spray, which is why we ventilate the bathroom. It fades as the coating cures.
What areas do you cover?
We work UK-wide, and that includes Moorend. Our prices are the same everywhere.
It’s been repaired before. Can you still fix it?
Most of the time. Let us know what was used before and we’ll plan for it.
How long is the bath unusable?
One day for most baths and can be used the day after. We’ll confirm timings when we quote.
Do you work in Moorend?
Yes. We cover the whole UK and travel to Moorend and the rest of Stockport. Send pictures and we will quote, or call 0345 017 0787.
Is a repair better than a new one?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we will tell you.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
More services for Moorend
DIY repairs versus a professional job
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
About our accreditations · Every repair comes with a one-year guarantee.
