Leeds · England
Bath re-enamelling & resurfacing in Moorside, Leeds
Full bath re-enamelling and resurfacing for homes and businesses in Moorside and across Leeds. Free, fixed quotes from your pictures.
- Resurfacing from £350
- Several chips and rust patches
- A bath that stays dull however much you clean it
About Moorside
Moorside is about 1 mile east of Pudsey, in Leeds. Across the LS13 area, we come to you. Moorside is one of 198 towns and villages in Leeds we cover.
Here we cover the LS13, LS12 and LS28 postcode area. Whether you live on Wood Lane, Back Lane and Bath Lane or a nearby road, we can come to you. Nearby, we also work in Swinnow (1 mile west), Bramley (1 mile north), Wyther (1 mile east), Bagley (2 miles north-west) and Kirkstall (2 miles north-east). We also work in nearby towns such as Leeds (4 miles east), Morley (4 miles south), Rothwell (7 miles south-east), Beeston (4 miles south-east), Horsforth (3 miles north) and Wetherby (14 miles north-east).
Around Moorside
Typical jobs here are in homes near Christ the Saviour Church, Farnley Hall Park and Park Spring Primary School. You’ll also find The Swinnow pub (within half a mile west) and Crawshaw Academy (1.1 miles south-west). There is a railway station in Moorside itself: Bramley (West Yorkshire) station. Further afield, we also cover the area around The Light (3.6 miles east) and St Mary's Hospital (0.9 miles east). Green spaces nearby include Rodley Nature Reserve and Yeadon Tarn.
Bath re-enamelling in Moorside without replacing anything
Resurfacing renews the entire surface of the bath without a refit. It’s the answer when the whole bath is tired rather than one spot. Whether it’s wear marks under the taps and a coloured bath you want in white, we can generally put it right, whatever the material.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Where
- Moorside (LS13, LS12, LS28)
- Area hub
- Leeds
- Cover
- A year, on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
What else we do in Moorside
Repairing versus replacing in Moorside
A new bath means a plumber, removing a heavy bath, making good the walls and tiles and several days without a working bathroom. Re-enamelling renews the entire surface with the bath left where it is. Resurfacing from £350, with every job priced individually. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why choose Surface Doctor in Moorside
- We leave the room as we found it
- Nothing taken out or refitted
- CHAS and Constructionline accredited
- Fixed prices from your photos
Read our prices page or bath cost comparison.
What bath re-enamelling costs
Resurfacing from £350. Each job gets its own fixed quote. This is what makes a difference:
- Unusual colours or finishes
- Any earlier repairs that need removing first
- Access to the area
- How much damage there is
A repair is priced on what needs doing, not your postcode. You’ll see the full price before you book, with no extras added later.
How to get a fixed quote
Most quotes are done from pictures alone. To make it quick:
- Something in shot to show the size
- The postcode, so we can plan the visit
- Daylight if possible, and no flash reflection
- What it’s made of, if you know
Send us photos of the damage and a wider shot of the whole item, with your LS13 postcode, and we will reply with a fixed quote.
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.
How it works
We begin by going over the job with you. After that, protection goes down around the work area and the work begins. It normally takes most of the day, and we’ll keep you posted as we go.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the day after, the bath is ready.
Getting ready for the visit
- Clear toiletries, mats and anything else from around the area
- Plan for the room to be out of bounds to pets and children
- Point us to the nearest place to park
How to get a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote the same day in most cases.
Related advice
Looking after it afterwards
Much of the damage we repair could have been avoided. A few tips:
- A dripping tap should be fixed promptly
- Do not let dyes or oils sit on the finish
- Respect the curing time we give you
- Never use suction bath mats
Wipe the bath dry after use where you can, especially in hard water areas, and rinse away any product left on the surface.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
What we can’t put right
It helps to know what we cannot do:
- A cast iron or steel bath that’s cracked right through
- Anything hidden under an old coating, until we remove it
- An acrylic bath that flexes badly underfoot
If in doubt, send photos and we’ll say what we think before booking.
What we work on
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Basins & shower trays
When to call us in Moorside
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. We strip what’s failing and start again.
It’s worth getting a quote if you see:
- An original cast iron bath that needs restoring
- Wear marks under the taps
- An old resurfacing that is failing
- A coloured bath you want in white
Comparing quotes
- What prep work is covered
- Whether there are any call-out or travel charges
- Whether the price is fixed and includes VAT
- Aftercare advice
Common questions in Moorside
Is repairing better than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we’ll tell you.
Do you come to Moorside?
Yes. We cover the whole UK and travel to Moorside and the rest of Leeds. Send photos and we’ll quote, or call 0345 017 0787.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Leeds.
When can you do it?
We will give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
Can you redo someone else’s repair?
Yes, regularly. Removing the old work can add time, and that is in the quote.
Can you change the colour of my bath?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
What do you need from me?
Send pictures through the quote form or call 0345 017 0787, and we will take it from there.
Materials and what they mean for the repair
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
About our accreditations · Every repair comes with a one-year guarantee.
