Leeds · England
Bath Re-enamelling in Wyther
Full bath re-enamelling and resurfacing in Wyther, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A coating lifting around the plughole
- A bath that stays dull however much you clean it
Bath re-enamelling in Wyther without replacing anything
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. We work on Victorian roll-tops, acrylic baths and cast iron baths, and people most often call us about several chips and rust patches and a bath that stays dull however much you clean it.
You get a one-year guarantee, the same in Wyther as everywhere else we work.
- Location
- Wyther (LS12, LS13, LS5)
- Region
- Leeds
- Cover
- One year on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Also in Wyther
How we price bath re-enamelling
Resurfacing from £350. A fixed quote means you know the cost before booking. We look at:
- Whether old repairs or coatings need taking off
- Unusual colours or finishes
- What the surface is made of
- The type of damage
No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
How to get a fixed price
Most quotes are done from pictures alone. To make it quick:
- One picture of the whole bath
- The postcode, so we can plan the visit
- Any details about the material
- Natural light rather than flash
To get a price, send two or three photos using our quote form or ring us. We’ll tell you honestly if a repair is the right fix.
When we would advise against a repair
Some jobs are not right for a repair, including:
- Leaking taps or wastes (a plumber’s job)
- Anything hidden under an old coating, until we remove it
- A metal bath with a through crack
Send us photos and we will tell you honestly.
What we work on
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
How the visit works
The work is clean and fairly quiet. We protect the area first, then the work takes a full day. At the end we talk you through the curing time and the aftercare.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the next day.
How to prepare
- Mention any earlier repairs or resurfacing
- Keep a parking space free if you can
- Mention any parking restrictions or tricky access
Getting a price
Upload photos of the damage and one of the entire item, with your LS12 postcode, and we’ll come back with a fixed quote.
Related advice
Common problems we fix in Wyther
Previous coatings can fail too, lifting by the plughole or blistering. We strip what’s failing and start again.
Look out for these signs:
- A coating lifting around the plughole
- An original cast iron bath that needs restoring
- A dull, rough surface that won’t come clean
- Wear marks under the taps
What to look for in a quote
- The length of the guarantee and what it covers
- A fixed price, and whether VAT is included
- Whether cleaning and preparation are in the price
- Whether there are any call-out or travel charges
Where we work around Wyther
Wyther is about 2 miles west of Leeds, in Leeds. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Our repair technicians cover all 198 towns and villages across Leeds, from the larger towns to small villages.
All of LS12, LS13 and LS5 is within our area, from the main roads to the quietest streets. We regularly work on streets such as Tower Lane, Park Avenue and Aston Avenue. You will find Wyther on the A647, which makes it straightforward to reach. Close by, we cover Kirkstall (1 mile north), Bramley (1 mile north-west), Moorside (1 mile west), Swinnow (1 mile west) and Hawksworth (2 miles north). Further out, we also cover Morley (4 miles south), Pudsey (3 miles west), Rothwell (7 miles south-east), Beeston (3 miles south-east), Farsley (3 miles west) and Horsforth (3 miles north-west).
Around Wyther
In Wyther, that means homes near Christ The King Catholic Primary School, Armley Park and Church of the Venerable Bede and the streets around them. Nearby too are Dixons Unity Academy (0.7 miles south) and Travellers Rest pub (less than half a mile south). The nearest railway station is Headingley station, roughly 1.1 miles north-east. Further afield, we also cover the area around St Mary's Hospital (within half a mile south-west) and The Light (2.6 miles east). Green spaces nearby include Post Hill and Rodley Nature Reserve.
What your bath is made of matters
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s the part we put right.
Wyther: your questions answered
Can pets and children be at home?
Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside.
Is it worth repairing rather than replacing?
Generally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
Can you make a coloured bath white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
Can a failed resurfacing be redone?
Generally, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Can you repair several things at once?
Yes, and it’s frequently cheaper. Send pictures of everything together and we will quote them together.
How much does bath re-enamelling cost in Wyther?
Resurfacing from £350. Because every job differs, we price from photos. You will get a fixed figure before booking.
Can you redo someone else’s repair?
Usually, yes. The old repair comes out first, so mention it when you send pictures.
Keeping it looking good
Once the work has cured, treat it gently:
- Wipe the bath dry after use in hard water areas
- Repair dripping taps early
- Wash away dyes and oils after use
- Use washing-up liquid and a soft cloth
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
For landlords and businesses
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
We regularly work with letting and managing agents. Send the address, photos and access details and we’ll arrange it.
About our accreditations · Every repair comes with a one-year guarantee.
