Highland · Scotland
Bath Re-enamelling in Morar
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Morar. Free, fixed quotes from your pictures.
- Resurfacing from £350
- Enamel that’s lost its shine and feels rough
- Lots of chips and rust spots
What a repair cannot fix
A repair is not right for every job, for example:
- Problems we can’t see until an old finish comes off
- An acrylic bath that flexes badly underfoot
- Holes rusted through the metal
If in doubt, send photos and we’ll say what we think before you book.
Surfaces we repair
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Cast iron baths
About our bath re-enamelling in Morar
A re-enamelled bath looks and feels like a new one, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. Whether it’s staining under the taps and around the waste and an outdated colour you’d like to change, we can generally put it right.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Morar (PH40)
- Region
- Highland
- Guarantee
- One year on every repair
- Price
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What affects the price in Morar
Prices start from £350. We price every job individually, from your photos. The main factors are:
- How much damage there is
- Whether it’s a chip, crack, burn or wear
- Where the damage is and how we get to it
- Whether we combine several jobs
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
Quotes from your photos
A couple of clear pictures is all it takes. Try to include:
- A clear, close picture of the problem area
- The postcode, so we can plan the visit
- A wider photo showing the entire bath
- Whether it’s been repaired or coated before
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
About Morar
Morar is in Highland. Wherever you are in the PH40 postcode area, we carry out the work at your property. Morar is one of 253 towns and villages in Highland we cover.
We work across PH40 and the streets around it. Streets in the area include Rhubana View and Columba Road. Other places close to Morar include Glenancross (1 mile south-west), Mallaig (2 miles north), Arisaig (4 miles south), Ardvasar (7 miles north-west) and Armadale (7 miles north-west). Some remote addresses need extra planning, so it’s best to call first.
Landmarks near Morar
Locally, our jobs take us to homes close to Roman Catholic Church Of St Cumin And Presbytery and Mallaig High School and the streets around them. Morar has its own railway station: Morar station. Well-known places in the area include Mallaig Heritage Centre (2.5 miles north). Open spaces near Morar include Loch a' Ghille Ghobaich.
DIY kit or professional repair?
If you do try a kit, read the instructions carefully, and give it the full curing time. If it fails, we can still put it right.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
When to call us in Morar
Hard water speeds up the wear, and abrasive cleaners do the most damage.
It’s worth getting a quote if you see:
- Wear marks under the taps
- Chips and rust in more than one place
- An outdated colour you’d like to change
- A peeling or bubbling previous coating
What to look for in a quote
- Who will actually do the work
- Whether the price is fixed and includes VAT
- What aftercare is recommended
- What preparation is included
Repairing versus replacing in Morar
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing generally wins. Prices start from £350. No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Why book with us
- Accredited with CHAS, Constructionline and SafeContractor
- Colours mixed by hand to suit your surface
- Usually one visit, start to finish
- Straight answers about what a repair can do
See our full price list and resurfacing vs replacement cost guide.
Also in Morar
Aftercare tips
Nothing complicated is needed, just a few sensible habits:
- Have chips seen to early
- Fix dripping taps quickly
- Keep suction mats out of the bath
- Wash away dyes and oils after use
Wipe the bath dry after use where you can, particularly with hard water, and rinse off any bath products.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
How the visit works
Arrival times are agreed in advance, so you are not left guessing. On site, it takes most of the day in most cases. The room is left tidy and you will know when it can be used.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the day after.
Getting ready for the visit
- Keep children and pets away from the room on the day
- Let us know about parking or access
- Mention any earlier repairs or resurfacing
Getting a price
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Read more
Morar questions
How do I get a price for bath re-enamelling in Morar?
Prices start from £350. Every job gets a fixed quote based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.
Will it make a mess?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Can you repair several things at once?
Of course, and it generally saves money. Send pictures of everything together and we’ll quote them together.
Can I get a quote without a visit?
In nearly every case. If pictures do not show enough, we will ask for another angle.
What happens after I send pictures?
You will get a fixed quote back, plus dates. There is no obligation to book.
How long is the bath unusable?
Normally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
What if the damage is worse than the photos show?
We will show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.
Can you re-enamel a roll-top bath?
Yes, often. We resurface the inside, and the outside can be refinished too.
For landlords and businesses
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
About our accreditations · Every repair comes with a one-year guarantee.
