Rutland · England
Bath Re-enamelling for Morcott homes
Bath re-enamelling in Morcott without the cost of replacing. Send us pictures for a fixed quote, then we come to you.
- Resurfacing from £350
- A coloured bath you want in white
- Enamel that’s lost its shine and feels rough
Common questions in Morcott
How soon can you come?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Can I get a quote without a visit?
Nearly always. We only ask to see it in person if the photos can’t show what we need.
Can you do the outside of a roll-top?
Yes. We can do the inside and outside if you’d like.
Does someone need to be in?
We need someone to let us in. You don’t need to watch us work.
Will the price change on the day?
The price is fixed for what the pictures show. If there’s more, we’ll tell you before starting.
Can you resurface a pink bath in white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
Is the work guaranteed?
Every repair comes with a one-year guarantee. We’ll explain what it covers when we quote.
Will the bath be moved?
No. We resurface it in place, so nothing else is disturbed.
Bath re-enamelling in Morcott, done in place
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Whether it’s a coating lifting around the plughole and staining under the taps and around the waste, we can help, on acrylic baths, cast iron baths and Victorian roll-tops alike.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before booking.
- Location
- Morcott (LE15)
- County
- Rutland
- Guarantee
- One year on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
How it works
Your technician turns up at the time we agreed with you and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. Most visits take most of the day, and we leave the room as we found it.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the day after.
Before we arrive
- Let the surface dry out before the visit
- Open a window if you can
- Tell us if there are stairs or a lift
How to get a price
You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.
Related advice
What we are called out for in Morcott
Hard water speeds up the wear, and abrasive cleaners do the most damage.
These are the problems we are asked about most:
- Brown or grey marks that don’t clean off
- A period or roll-top bath worth keeping
- A coloured bath you want in white
- Chips and rust in more than one place
What to look for in a quote
- What the guarantee covers, and for how long
- How long it needs to cure
- What protection goes down before work starts
- How to look after the finish
Landlord and trade work in Morcott
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Landlords, letting agents and housing providers in Morcott use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Should you replace it?
A new bath means a plumber, removing a heavy bath, re-tiling or making good the walls and several days without a working bathroom. Re-enamelling renews the entire surface with the bath left where it is. Resurfacing from £350, with every job priced individually. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Why us?
- Fixed prices from your photos
- Most jobs done in one visit
- Everything repaired in place
- Every repair guaranteed for a year
Take a look at our prices page or guide to resurfacing and replacement costs.
What else we do in Morcott
Keeping it looking good
To keep it looking its best:
- Use washing-up liquid and a soft cloth
- Rinse off hair dye, oils and bath bombs straight away
- Do not leave a chip unrepaired
- Repair dripping taps early
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Fix dripping taps quickly.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.
Where we work around Morcott
Morcott is about 6 miles south-east of Oakham, in Rutland. We visit clients in Morcott, so you do not need to take anything anywhere. We cover all 47 towns and villages across Rutland. Our nearest city page is Birmingham, about 54 miles away.
We work across LE15 and the streets around it. Jobs here include addresses on High Street, Station Road and School Lane and the roads around them. We also travel to Barrowden (1 mile east), Glaston (2 miles west), Seaton (2 miles south-west), Harringworth (2 miles south) and Stoke Dry (2 miles south-west). We also work in nearby towns such as Oakham (6 miles north-west), Uppingham (4 miles west), Barleythorpe (7 miles north-west), Cottesmore (8 miles north), Langham (8 miles north-west) and Whissendine (10 miles north-west).
Near you in Morcott
Our customers here include homes close to Church of St Mary and the streets around them. Nearby you will also find Normanton Church Museum (3.5 miles north). For a walk, there’s King's Hill.
Can I fix it myself?
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
If you do try a kit, read the instructions carefully, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
Different materials, different repairs
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported.
When we would advise against a repair
We will always be straight with you, so here’s what a repair will not do:
- A bath split right through the body
- Anything hidden under an old coating, until we remove it
- Holes rusted through the metal
If in doubt, send photos and we’ll say what we think.
Materials we work on in Morcott
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Cast iron baths
About our accreditations · Every repair comes with a one-year guarantee.
