South Gloucestershire · England

Bath re-enamelling & resurfacing in Morton, South Gloucestershire

We travel to Morton for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.

  • Resurfacing from £350
  • A coloured bath you want in white
  • Brown or grey marks that don’t clean off
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Morton?

How the visit works

When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job generally takes most of the day. We tidy up before we leave and let you know when you can use it again.

  1. The room is masked, protected and ventilated.
  2. We clean and degrease the bath and repair any chips or rust.
  3. We key the surface and put on a bonding primer.
  4. Several coats of new finish are sprayed on.
  5. Once cured, normally by the following day, the bath is ready.

Getting ready for the visit

  • Have a window or extractor fan available
  • Avoid using the area for a few hours before we arrive
  • Mention any earlier repairs or resurfacing

Getting a price

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price without visiting.

Send photos for a quote

Advice

Bath re-enamelling at your home in Morton

If your bath is sound but looks tired, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. We work on pressed steel baths, Victorian roll-tops and basins & shower trays, and people most often call us about an outdated colour you’d like to change and a bath that stays dull however much you clean it.

You are covered for a year from the day of the repair. If anything isn’t right, ring us and we will sort it.

Roll-top bath being refinished by a Surface Doctor technician
Location
Morton (BS35)
County
South Gloucestershire
Warranty
12 months on all our work
Price
From £350. Free, fixed price from pictures
Call
0345 017 0787
Page updated
23 October 2026

When a repair isn’t the answer

Some problems need a builder, plumber or fitter rather than us:

  • Leaks from fittings rather than the bath
  • Steel that has corroded right through
  • Damage hidden under a previous coating, until it’s stripped back

Send us pictures and we’ll tell you honestly.

Materials we repair

  • Acrylic baths
  • Cast iron baths
  • Victorian roll-tops
  • Pressed steel baths
  • Basins & shower trays

What your bath is made of matters

Roll-top and period baths

Freestanding roll-tops can be done inside and out, and the outside can be refinished too.

Cast iron

A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.

When to call us in Morton

Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.

These are the problems we are asked about most:

  • A roll-top that is seen better days
  • An outdated colour you’d like to change
  • An old resurfacing that’s failing
  • Stains that won’t shift

Comparing quotes

  • Is the price fixed, and does it include VAT?
  • How the room is protected while they work
  • Aftercare advice
  • Whether they match the colour on site

10 questions to ask before you book

Covering Morton

Morton is about 6 miles north-west of Yate, in South Gloucestershire. Jobs in Morton are booked in like any other job: a fixed quote from pictures, then a visit to do the work. Morton is one of 110 towns and villages in South Gloucestershire we cover. You can also see our page for Birmingham, about 65 miles away.

Our visits in BS35 are booked in the same way as anywhere else. Jobs here include addresses on Park Road, Butt Lane and North Road and the roads around them. Other places close to Morton include Thornbury (1 mile south), Lower Morton (1 mile north), Crossways (1 mile east), Upper Morton (1 mile north-east) and Duckhole (1 mile north). Within a short drive, we also cover Kingswood (11 miles south), Mangotsfield (9 miles south), Yate (6 miles south-east), Fishponds (9 miles south), Bradley Stoke (6 miles south) and Patchway (7 miles south-west). Being one of South Gloucestershire’s larger places, Morton is somewhere we visit frequently.

Around Morton

Locally, our jobs take us to homes close to Manorbrook Primary School, The Castle School and The Royal George Public House and the streets around them. Well-known places in the area include Thornbury Castle (0.6 miles west) and Thornbury and District Museum (0.8 miles south-west). Green spaces nearby include Red Hill.

Map of Morton © OpenStreetMap contributors

Aftercare tips

Much of the damage we repair could have been avoided. A few tips:

  • Respect the curing time we give you
  • Get any chip repaired quickly
  • Clean with a soft cloth and mild detergent
  • Keep toiletries on a shelf rather than in the bath

Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Fix dripping taps quickly.

On a worn bath, rust spots keep spreading. It’s simpler to resurface before they spread.

What affects the price in Morton

Prices start from £350. We charge the same across the UK, including Morton. What changes the price is:

  • Doing more than one item at once
  • Where the damage is and how we get to it
  • How hard the colour is to match
  • Whether old repairs or coatings need taking off

It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.

How to get a fixed quote

Most quotes are done from photos alone. To make it quick:

  • A coin or ruler next to the damage for scale
  • The postcode, so we can plan the visit
  • Whether it’s been repaired or coated before
  • One picture of the entire bath

The quickest way to a price is to send a couple of photos through our quote form or call us. We’ll say right away if a repair is the right fix.

FAQs for Morton

Do you cover the whole of South Gloucestershire?

The whole UK, including all of South Gloucestershire. Just include your postcode and we’ll confirm dates.

Do you charge for travel?

We don’t add a call-out fee. Your fixed price includes everything.

How quickly can you book me in?

It depends on the time of year and where you are. We’ll offer you dates when we send your quote.

What if the damage is worse than the photos show?

We’ll show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.

How long will the bath be out of use?

Normally one day, with the bath ready the next day. A badly pitted bath can need a second day.

Is it OK to have pets in the house?

Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.

How do I book?

Use the quote form or ring 0345 017 0787, and we’ll take it from there.

Can you quote from photos?

Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.

Why repair rather than replace?

If the bath is sound, re-enamelling is typically much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Our bath re-enamelling starts from £350. Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.

Why book with us

  • We come to you, anywhere in the UK
  • Normally one visit, start to finish
  • CHAS, Constructionline and SafeContractor accredited
  • Dust sheets down, tidy finish

Read our prices page or resurfacing vs replacement cost guide.

DIY repairs versus a professional job

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.