South Lanarkshire · Scotland
Bath Re-enamelling in Mount Vernon
Full bath re-enamelling and resurfacing at your home in Mount Vernon, with a one-year guarantee on every repair.
- Resurfacing from £350
- Wear marks under the taps
- A bath in a colour that no longer suits
Repair or replace in Mount Vernon?
A replacement frequently means several trades over several days. Re-enamelling is one technician, normally one day. Our bath re-enamelling starts from £350. A repair typically costs much less than people expect, particularly next to the cost of replacement. Send photos and we will give you the exact figure.
Why book with us
- One-year guarantee on every repair
- Generally one visit, start to finish
- CHAS, Constructionline and SafeContractor accredited
- Nothing taken out or refitted
Take a look at our full price list and resurfacing vs replacement cost guide.
Bath re-enamelling in Mount Vernon without replacing anything
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It suits baths that are dull, stained, rough or chipped all over. If you’re dealing with stains that won’t shift and chips and rust in more than one place, we can typically put it right, on basins & shower trays, Victorian roll-tops and acrylic baths alike.
We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.
- Area
- Mount Vernon (G32, G69, G71)
- Area hub
- South Lanarkshire
- Warranty
- A year, on every repair
- Price
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
When we would advise against a repair
Before you book, it’s worth knowing the limits too:
- Leaking taps or wastes (a plumber’s job)
- A bath split right through the body
- Acrylic that moves when you stand in it
If in doubt, send pictures and we will say what we think.
Materials we work on in Mount Vernon
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
What your bath is made of matters
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Aftercare tips
To keep it looking its best for years:
- Clean with a soft cloth and mild detergent
- Store bottles off the bath
- Get any chip repaired quickly
- Respect the curing time we give you
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Mount Vernon and nearby
Mount Vernon is about 2 miles north of Cambuslang, in South Lanarkshire. Wherever you are in the G32 postcode area, we come to you. We work in 139 places across South Lanarkshire.
Jobs in G32, G69 and G71 are booked in the same way as anywhere else. Whether you live on Manse Road, Danby Road and Wester Road or a nearby road, a technician can come to you. Neighbouring places we cover include Sandyhills (1 mile north-west), Barrachnie (1 mile north-east), Garrowhill (1 mile north-east), Barlanark (1 mile north) and Carmyle (1 mile south-west). Within a short drive, we also cover East Kilbride (6 miles south), Hamilton (6 miles south-east), Uddingston (3 miles south-east), Blantyre (4 miles south-east), Larkhall (10 miles south-east) and Carluke (14 miles south-east).
Landmarks near Mount Vernon
Locally, our jobs take us to homes close to Dr Ann Mitchell Park, Glasgow and Bannerman High School, among other places. Mount Vernon has its own railway station: Mount Vernon station. A little further out are Lightburn Hospital (1.5 miles north-west) and Glasgow Fort (2 miles north). Not far away are Cathkin Braes and Hogganfield Loch.
Work for landlords and builders
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We’ll fit around changeovers where we can.
Nearby places to Mount Vernon
What else we do in Mount Vernon
How it works
Here’s how a visit normally runs: we arrive on time, protect everything around the work area, do the job and tidy away. Allow most of the day. Before we go, we’ll explain how long to leave it and what to avoid for the first few days.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the following day.
How to prepare
- Open a window if you can
- Let us know if it has been repaired before
- Point us to the nearest place to park
Ask for a price
Send us a photo of the damage and a wider shot of the entire item, with your G32 postcode, and we’ll reply with a fixed quote.
Read more
Common problems we fix in Mount Vernon
Enamel wears gradually. Abrasive cleaners, limescale and years of use wear the gloss away, starting where water runs and sits.
The things customers typically mention when they call include:
- A dull, rough surface that won’t come clean
- Stains that will not shift
- A bath in a colour that no longer suits
- A peeling or bubbling previous coating
Before booking anyone
- How to look after the finish
- How long the guarantee is and what it covers
- How the colour is matched
- What happens if they find more damage
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Common questions in Mount Vernon
Is repairing better than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
Is there a call-out fee?
No. Our quotes include travel, and we charge the same wherever you are.
How quickly can you book me in?
That depends on our diary for your area. We will offer you dates when we send your quote.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Can you repair several things at once?
Yes. Doing several items on one visit typically costs less than separate visits. Include photos of each item.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes. Removing the old finish takes extra time, which we include in the price.
Will the bath be moved?
No, it stays where it is. We work on the bath in place, with the room masked and ventilated.
Do you resurface freestanding baths?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
About our accreditations · Every repair comes with a one-year guarantee.
