Shropshire · England
Bath Re-enamelling in Mucklestone
Damaged bath in Mucklestone? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- Stains that won’t shift
- A bath in a colour that no longer suits
Bath re-enamelling in Mucklestone without replacing anything
If your bath is sound but looks tired, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. Common call-outs are for wear marks under the taps and chips and rust in more than one place, in cast iron baths, pressed steel baths and acrylic baths.
Peace of mind is built in: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.
- Location
- Mucklestone (TF9)
- Area hub
- Shropshire
- Guarantee
- A year, on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Questions from Mucklestone
Do you come to Mucklestone?
Yes. We cover the entire UK and travel to Mucklestone. Send pictures and we will quote, or call 0345 017 0787.
Can you make a coloured bath white?
Yes, white is the usual choice. Mention the colour you want when you send photos.
Is it worth repairing rather than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
How long will the bath be out of use?
Most baths are done in a day, ready the next day. We’ll confirm timings when we quote.
Is my repair covered?
Every repair comes with a one-year guarantee. We’ll explain what it covers when we quote.
Will there be fumes?
A little, during the work. We set up ventilation and the smell fades as it cures.
Will the price change on the day?
We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.
Do the materials smell?
Some materials have a smell while they’re applied, which is why we ventilate. It clears as the materials cure.
Looking after it afterwards
Good habits make a big difference to how long a repair lasts:
- Clean with a soft cloth and mild detergent
- Don’t let dyes or oils sit on the finish
- Get any chip repaired quickly
- A quick wipe after use keeps limescale away
Rinse the bath and wipe it over after use, especially in hard water areas, so limescale can’t build up.
Don’t try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
Landlords, agents and businesses in Mucklestone
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
We regularly work with letting and managing agents. Send the address, pictures and access details and we’ll arrange it.
Nearby places to Mucklestone
What else we do in Mucklestone
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Our work in Mucklestone
Mucklestone is about 4 miles north-east of Market Drayton, in Shropshire. We travel to clients in Mucklestone and the surrounding area, so there is no workshop to go to. Mucklestone is one of 433 towns and villages in Shropshire we cover. Our jobs stretch from Mucklestone to Manchester (38 miles away).
Jobs in TF9 are booked in the same way as anywhere else. Close by, we cover Napley (1 mile north-west), Bearstone (2 miles north), Blore (2 miles south), Norton in Hales (2 miles north-west) and Betton (2 miles west). We also work in nearby towns such as Market Drayton (4 miles south-west), Whitchurch (12 miles west), Wem (14 miles west), Shawbury (14 miles south-west), Prees Higher Heath (10 miles west) and Hinstock (7 miles south).
Landmarks near Mucklestone
Around Mucklestone, we work in homes near Church of St Mary and St Mary's CofE (A) Primary School, among other places. A little further out are Castle Hill (2.5 miles east) and Market Drayton Museum And Resource Centre (3.7 miles south-west).
What affects the price in Mucklestone
Prices start from £350. We give every job a fixed price from photos. This is what makes a difference:
- The material and finish
- Whether it’s a chip, crack, burn or wear
- Previous DIY repairs that have to come out
- Where the damage is and how we get to it
Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access.
How to get a fixed quote
You can take the pictures on your phone, there is no need for anything special. Just ensure we can see:
- A coin beside the damage so we can judge size
- Natural light rather than flash
- A wider photo showing the whole bath
- Details of any past repairs
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Do you need bath re-enamelling in Mucklestone?
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. That’s the point where re-enamelling makes sense.
If you can see any of these, send us a picture:
- A bath in a colour that no longer suits
- Thin, worn enamel in places
- A peeling or bubbling previous coating
- A roll-top that’s seen better days
Before booking anyone
- Who turns up on the day
- If travel is included in the price
- How the room is protected while they work
- What prep work is covered
Repair or replace in Mucklestone?
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Tiles, panels and taps stay put. Resurfacing from £350, with every job priced individually. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
What you get with us
- CHAS and Constructionline accredited
- Colours mixed by hand to suit your surface
- Every repair guaranteed for a year
- Same prices wherever you are
Take a look at our full price list or bath cost comparison.
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
How the visit works
Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, then carry out the work, which normally takes a full day. If we find something your photos didn’t show, we will explain it before carrying on.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the next day.
Before we arrive
- Make sure the area is dry
- Keep a parking space free if you can
- Tell us about any previous repairs or coatings
How to get a price
There’s no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
