Shropshire · England
Bath re-enamelling & resurfacing in Blore, Shropshire
Bath re-enamelling in Blore without the cost of replacing. Get a fixed quote from your pictures, then we come to you.
- Resurfacing from £350
- Thin, worn enamel in places
- A coating lifting around the plughole
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
Bath re-enamelling in Blore, done in place
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. Common call-outs are for a dull, rough surface that won’t come clean and brown or grey marks that don’t clean off, in acrylic baths, basins & shower trays and Victorian roll-tops.
Whatever the size of the job, you get the same one-year guarantee in Blore and across Shropshire.
- Area
- Blore (TF9)
- Area hub
- Shropshire
- Guarantee
- One year on every repair
- Price
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Materials and what they mean for the repair
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
How to look after the repair
Looking after the surface is easy, and it makes a real difference:
- Avoid suction-cup mats
- Have chips seen to early
- A dripping tap should be fixed promptly
- Keep toiletries on a shelf rather than in the bath
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. It’s simpler to resurface before they spread.
What we can’t put right
We would rather lose a job than do one that won’t last, so these are the limits:
- Holes rusted through the metal
- Leaks from fittings rather than the bath
- Problems we cannot see until an old finish comes off
Send us pictures and we will tell you honestly before booking.
Materials we repair
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
Work for landlords and builders
If you manage property in Blore, we will quote for several properties at once. Just send pictures for each address and we will come back with a combined price.
For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
What affects the price in Blore
Prices start from £350. We price every job individually. The main factors are:
- The material
- The type of damage
- The size and number of damaged areas
- How hard the colour is to match
The price reflects the work involved, not where you live. The full price is agreed before you book, with nothing added on the day.
Send photos for a quote
Phone photos are fine. Ensure they show:
- Any details about the material
- A clear, close picture of the problem area
- Details of any past repairs
- The postcode, so we can plan the visit
To get a price, send a couple of photos using our quote form or ring us. We’ll say immediately whether it can be repaired.
The process
Arrival times are agreed in advance. On site, it takes a full day. The room is left tidy and ready to use once it has cured.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Mention any earlier repairs or resurfacing
- Keep a parking space free if you can
- Move bottles, mats and clutter away from the area
Get a quote
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them over. You will get a fixed quote, not an estimate.
Related advice
Repair or replace in Blore?
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Tiles, panels and taps stay put. Prices start from £350. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why us?
- Rooms protected and left tidy
- A year’s guarantee on all work
- CHAS, Constructionline and SafeContractor accredited
- One price list for the entire UK
Take a look at our pricing or resurfacing vs replacement cost guide.
Blore and nearby
Blore is about 3 miles east of Market Drayton, in Shropshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Our technicians cover 433 places in Shropshire, from the larger towns to small villages. You can also see our page for Birmingham, about 37 miles away.
Every address in TF9 is covered. Close by, we cover Hales (1 mile south-west), Almington (1 mile west), Mucklestone (2 miles north), Betton (2 miles north-west) and Napley (2 miles north). Further out, we also cover Market Drayton (3 miles west), Whitchurch (12 miles west), Wem (13 miles west), Shawbury (13 miles south-west), Prees Higher Heath (10 miles west) and Hinstock (5 miles south).
Local landmarks in Blore
Locally, our jobs take us to homes close to Church of St Mary, among other places. Further afield, we also cover the area around Cheswardine Castle (2.8 miles south) and Market Drayton Museum And Resource Centre (2.9 miles west).
Questions from Blore
Someone resurfaced my bath and it’s peeling. Can you help?
Typically, yes. We strip the failing coating and resurface it properly. Mention it when you send pictures.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
What do you need from me?
Just pictures, your postcode and a contact number. On the day, access to the room.
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Landlords are frequently glad to have it sorted before the end of a tenancy.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Is a repair better than a new one?
Normally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.
Do the materials smell?
There may be a mild smell during the work.
Is it messy?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Places near Blore
Other services in Blore
About our accreditations · Every repair comes with a one-year guarantee.
