Norfolk · England
Bath Re-enamelling for Mulbarton homes
Bath re-enamelling in and around Mulbarton: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Thin, worn enamel in places
- An original cast iron bath that needs restoring
About our bath re-enamelling in Mulbarton
Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Doing them in place keeps an original feature. Common call-outs are for several chips and rust patches and a peeling or bubbling previous coating, across pressed steel baths, cast iron baths and basins & shower trays.
Every job is backed for twelve months. We return to put right any problem with the work.
- Where
- Mulbarton (NR14)
- County
- Norfolk
- Guarantee
- A year, on every repair
- Quote
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Repairing versus replacing in Mulbarton
There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you are refitting the entire room anyway. In most other cases, resurfacing is the better choice. Our bath re-enamelling starts from £350. We don’t add extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why choose Surface Doctor in Mulbarton
- Nothing taken out or refitted
- Technicians who travel to you, UK-wide
- We leave the room as we found it
- Same prices wherever you are
Read our full price list and bath cost comparison.
How the visit works
You don’t need to empty the room. We bring everything we need with us, put protection down and get going once we have agreed what we’re doing. It usually takes a full day, and you are welcome to carry on with your day while we work.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Make sure the area is dry
- Move bottles, mats and clutter away from the area
- Let us know which floor the room is on
Get a quote
Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and you will get a fixed price back. Quotes are free and no obligation.
Advice
Mulbarton: your questions answered
Do you resurface freestanding baths?
Yes. Inside and out if you’d like.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
What do you need from me?
Send photos through the quote form or call 0345 017 0787, and we’ll take it from there.
Is a repair better than a new one?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we will tell you.
Can you repair something that’s been repaired before?
Yes, regularly. It can add a little time, which we include in the quote.
Will there be a smell?
Some materials have a smell while they’re applied, which is why we ventilate. It clears as the materials cure.
Can you resurface a pink bath in white?
Yes, most people go for white. Mention the colour you want when you send photos.
Will the bath be moved?
Not at all. We work on the bath in place, with the room protected and ventilated.
When we would advise against a repair
We will not take on work that will not last, so here’s what a repair can’t put right:
- Acrylic that moves when you stand in it
- A metal bath with a through crack
- Plumbing leaks, which need a plumber
Send us photos and we’ll tell you honestly before booking.
What we work on
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
Landlord and trade work in Mulbarton
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
Aftercare tips
Much of the damage we repair could have been avoided. A few tips:
- Stick to gentle, non-abrasive cleaners
- Never use suction bath mats
- Wash away dyes and oils after use
- Keep toiletries on a shelf rather than in the bath
Treat the new finish gently at first: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Prices and what affects them
Prices start from £350. There’s no charge for travel to Mulbarton. The price depends on:
- Previous DIY repairs that have to come out
- How much damage there is
- How hard the colour is to match
- The material
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Quotes from your pictures
The better the pictures, the more accurate the price. Here’s what helps:
- Natural light rather than flash
- One sharp close-up of the damage
- Any earlier repairs or coatings
- The material, if you know it
A quote takes minutes to ask for: photograph the damage, then the entire bath, include your postcode and send them to us. You will get a fixed price, not an estimate.
Mulbarton and the surrounding area
Mulbarton is about 5 miles east of Wymondham, in Norfolk. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We work in 797 places in Norfolk, from the larger towns to small villages.
Every address in NR14 is covered, from the main roads to the quietest streets. Local streets include Castelins Way, Porterbush Road and Bromedale Avenue, and we cover them all. We also cover the places around Mulbarton: Bracon Ash (1 mile west), East Carleton (1 mile north-west), Newton Flotman (1 mile south-east), Swainsthorpe (2 miles east) and Swardeston (2 miles north). Within a short drive, we also cover Norwich (6 miles north), Dereham (15 miles north-west), Wymondham (5 miles west), Sprowston (8 miles north-east), Thorpe St Andrew (7 miles north-east) and Attleborough (10 miles west).
Local landmarks in Mulbarton
Our customers here include homes close to Church of St Mary Magdalen, Mulbarton Primary School and World's End Public House and the streets around them. The nearest railway station is Wymondham station, roughly 4.9 miles west. Further afield, we also cover the area around Norfolk and Norwich University Hospital (4.3 miles north) and Forncett Industrial Steam Museum (3.9 miles south-west). For a walk, there’s Hethel Old Thorn.
Also near Mulbarton
What else we do in Mulbarton
Different materials, different repairs
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
About our accreditations · Every repair comes with a one-year guarantee.
