Hertfordshire · England
Bath Re-enamelling in Nash Mills
Problem with your bath in Nash Mills? We repair it in place, match it on site and guarantee the work for a year.
- Resurfacing from £350
- Worn patches where water runs and sits
- An outdated colour you’d like to change
How we handle bath re-enamelling in Nash Mills
Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. If you’re dealing with staining under the taps and around the waste and an outdated colour you’d like to change, we can usually put it right, on pressed steel baths, Victorian roll-tops and acrylic baths alike.
You get a one-year guarantee, the same in Nash Mills as everywhere else we work.
- Location
- Nash Mills (HP3, WD4)
- County
- Hertfordshire
- Warranty
- One year on every repair
- Price
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Landlords, agents and businesses in Nash Mills
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
What we are called out for in Nash Mills
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
Most people get in touch after spotting one of these:
- Thin, worn enamel in places
- Stains that won’t shift
- Lots of chips and rust spots
- Enamel that is lost its shine and feels rough
Questions to ask before booking
- What the guarantee covers, and for how long
- How long it needs to cure
- What prep work is covered
- How to care for the finish
Common questions in Nash Mills
Do you work in Nash Mills?
Yes. We work across the UK and come to Nash Mills. Send photos and we will quote, or call 0345 017 0787.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can you price it without visiting?
Yes, almost always. Clear pictures let us give you a fixed price without visiting.
Can you fix a peeling bath coating?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Can you do more than one item on the same visit?
Yes, and it’s often cheaper. Send pictures of everything together and you will get one combined price.
How do I book?
Photos of the damage, a picture of the entire bath and your postcode. After that, we just agree a date.
Will the bath be moved?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
When we would advise against a repair
A few problems are outside what a surface repair can do:
- Damage hidden under a previous coating, until it’s stripped back
- A metal bath with a through crack
- A poorly supported acrylic bath, until it’s firmed up
If in doubt, send pictures and we will say what we think.
Materials we work on in Nash Mills
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
Repairs by material
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
The process
There’s not much you need to do on the day. Show us the job, point us to the room, and we’ll take it from there. The job generally runs to most of the day, including clearing up.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Keep pets and children out of the room while we work
- Let the surface dry out before the visit
- Open a window if you can
Get a quote
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them over. You’ll get a fixed price, not an estimate.
Advice
How to look after the repair
Nothing complicated is needed:
- Keep toiletries on a shelf rather than in the bath
- Do not leave a chip unrepaired
- Rinse off hair dye, oils and bath bombs immediately
- Never use suction bath mats
Dry the bath after use if possible, and rinse off any bath products.
Rust spots on a worn bath get worse with time and make the job bigger. Resurfacing before they spread keeps it simpler.
Towns and villages near Nash Mills
Other services in Nash Mills
How we price bath re-enamelling
Resurfacing from £350. We give every job a fixed quote from pictures. This is what makes a difference:
- Whether we combine several jobs
- What the surface is made of
- The type of damage
- How hard the colour is to match
A repair usually costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Send photos for a quote
You can take the pictures on your phone. Make sure they show:
- Your postcode, so we can check dates
- Details of any past repairs
- Natural light rather than flash
- A coin or ruler next to the damage for scale
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through.
Nash Mills and nearby
Nash Mills is about 2 miles south of Hemel Hempstead, in Hertfordshire. Our repair technicians come to clients in Nash Mills and the surrounding area, so there is no workshop to go to. Nash Mills is one of 381 places in Hertfordshire we cover. We work right across the region, from Nash Mills to London (22 miles away).
Here we cover the HP3 and WD4 postcode area. We regularly work on streets such as Pond Road, Rose Lane and Lower Road and the roads around them. Close by, we cover Felden (1 mile west), Rucklers Lane (1 mile south-west), Bennetts End (1 mile north), Apsley (1 mile north-west) and Kings Langley (1 mile south). Larger places within reach include Watford (5 miles south-east), St Albans (5 miles east), Welwyn Garden City (12 miles north-east), Harpenden (7 miles north-east), Hatfield (10 miles east) and Borehamwood (9 miles south-east).
Landmarks near Nash Mills
We visit homes around Red Lion Public House, Nash Mills Church of England Primary School and Church of St Mary, among other places. For rail, the closest station is Apsley station, roughly 0.5 miles west. A little further out are Hemel Hempstead Hospital (1.7 miles north-west). Open spaces near Nash Mills include Long Deans and Verulamium Lake.
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
About our accreditations · Every repair comes with a one-year guarantee.
