Hertfordshire · England
Bath re-enamelling & resurfacing in Pimlico, Hertfordshire
Damaged bath in Pimlico? We repair it in place, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- A roll-top that is seen better days
- A coating lifting around the plughole
Bath re-enamelling in Pimlico without replacing anything
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. Whether it’s thin, worn enamel in places and an old resurfacing that’s failing, we can typically put it right, whatever the material.
You’re covered for a year from the day of the repair. Just call us if there is a problem and we will sort it.
- Where
- Pimlico (HP3)
- County
- Hertfordshire
- Cover
- One year on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
The process
Visits start with a quick look at the job together. After that, protection goes down around the work area and the work begins. It normally takes a full day.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Open a window if you can
- Let the surface dry out before the visit
- Tell us if there are stairs or a lift
Get a quote
Most customers in Pimlico get their price from photos. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Advice
Repairing versus replacing in Pimlico
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Tiles, panels and taps stay put. Our bath re-enamelling starts from £350. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why us?
- Most jobs done in one visit
- CHAS and Constructionline accredited
- Nothing taken out or refitted
- A fixed quote before booking
See our pricing and resurfacing vs replacement cost guide.
DIY repairs versus a professional job
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
What we cannot put right
A repair is not right for every job, including:
- A cast iron or steel bath that’s cracked right through
- Steel that has corroded right through
- Leaking taps or wastes (a plumber’s job)
If in doubt, send photos and we’ll say what we think.
What we work on
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Cast iron baths
FAQs for Pimlico
Can you fix a peeling bath coating?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Does re-enamelling smell?
Some odour is normal while we spray, which is why we ventilate the bathroom. It clears as the finish cures.
Can you repair something that is been repaired before?
Normally, yes. The old repair comes out first, so let us know about it.
Can you resurface a pink bath in white?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Is my repair covered?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Can landlords book you?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Hertfordshire.
Will the price change on the day?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
How quickly can you book me in?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
Also near Pimlico
What else we do in Pimlico
What your bath is made of matters
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Covering Pimlico
Pimlico is about 2 miles south-east of Hemel Hempstead, in Hertfordshire. Customers in Pimlico get the same service as everywhere else we cover: a fixed quote from your photos, then a visit to do the work. Pimlico is one of 381 places in Hertfordshire where we work. Our jobs stretch from Pimlico to London (about 21 miles away).
We work across the HP3 postcode area and the streets around it. Jobs here include addresses on Bedmond Road and Hyde Lane. If you’re just outside Pimlico, we cover Bedmond (1 mile south), Westwick Row (1 mile north), Nash Mills (2 miles west), Leverstock Green (2 miles north-west) and Bennetts End (2 miles north-west). Further out, we also cover Watford (5 miles south), St Albans (4 miles east), Welwyn Garden City (11 miles north-east), Harpenden (7 miles north-east), Hatfield (8 miles east) and Hertford (15 miles east).
Around Pimlico
Around Pimlico, we work in homes near The Swan Public House, Church of the Ascension and Longdean School, among other places. The nearest railway station is Kings Langley station, about 1.9 miles south-west. Well-known places in the area include Village Arcade St Albans (3.5 miles north-east) and Hypocaust Museum (2.9 miles north-east). Open spaces near Pimlico include Verulamium Lake and Longspring Wood.
Prices and what affects them
Prices start from £350. We don’t charge extra for travel to Pimlico. The price comes down to:
- The colour and finish to match
- The material and finish
- Doing more than one item at once
- What kind of damage it is
What it costs depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed price from your photos, so you know the cost before booking.
Quotes from your photos
A couple of clear pictures is all it takes. Try to include:
- A close-up of the damage, in focus
- Whether it’s been repaired or coated before
- Good light, ideally daylight, without flash glare
- A picture taken from further back
For a price in Pimlico, photos are the quickest way: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Work for landlords and builders
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.
Common problems we fix in Pimlico
Enamel wears gradually. Years of cleaning, hard water and hot baths wear the gloss away, starting where water runs and sits.
Most people contact us after spotting one of these:
- An outdated colour you’d like to change
- A peeling or bubbling previous coating
- A roll-top that is seen better days
- Staining under the taps and around the waste
Questions to ask before booking
- Whether there are any call-out or travel charges
- The length of the guarantee and what it covers
- When it can be used again
- What prep work is covered
About our accreditations · Every repair comes with a one-year guarantee.
