Lincolnshire · England
Bath Re-enamelling in Navenby
Fixed-price bath re-enamelling in Navenby and the surrounding area, normally in one visit and guaranteed for a year.
- Resurfacing from £350
- Staining under the taps and around the waste
- Lots of chips and rust spots
About our bath re-enamelling in Navenby
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. We work on Victorian roll-tops, basins & shower trays and cast iron baths, and common reasons people get in touch are an original cast iron bath that needs restoring and an old resurfacing that’s failing.
You are covered for a year from the day of the repair. Just call us if there’s a problem and we’ll come back.
- Area
- Navenby (LN5)
- County
- Lincolnshire
- Guarantee
- A year, on every repair
- Price
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Work for landlords and builders
We work for landlords, letting agents and housing providers in Navenby as well as homeowners. Repairing between tenancies keeps void periods short, and it usually costs far less than a refit.
Letting agents often send us photos straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
What your bath is made of matters
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is what we repair.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Keeping it looking good
Most damage we see is avoidable. A few tips:
- Use washing-up liquid and a soft cloth
- Avoid suction-cup mats
- Leave the bath for the full curing time before using it
- Wash away dyes and oils after use
Wipe the bath dry after use where you can, especially in hard water areas, and rinse off any bath products.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
How the visit works
Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, then carry out the work, which normally takes a full day. If anything looks different from your pictures, we will talk to you before going ahead.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Ensure the area is dry
- Move bottles, mats and clutter away from the area
- Keep pets and children out of the room while we work
How to get a price
You don’t need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Related advice
Repair or replace in Navenby?
If the bath is sound, re-enamelling is normally much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Prices start from £350. We charge the same wherever you are, with no extra for Navenby. The job itself decides the price: how much damage, what it’s made of and how many items.
Why us?
- Repair technicians who travel to you, UK-wide
- Nothing taken out or refitted
- We leave the room as we found it
- Usually one visit, start to finish
Take a look at our prices page or bath cost comparison.
Do you need bath re-enamelling in Navenby?
Often the bath has just had decades of use, and only the surface is worn. Underneath, a cast iron or steel bath is generally as strong as ever.
People typically call us after spotting something like this:
- Staining under the taps and around the waste
- A roll-top that’s seen better days
- Worn patches where water runs and sits
- A peeling or bubbling previous coating
What your quote should include
- Whether cleaning and preparation are in the price
- How long it needs to cure
- What protection goes down before work starts
- If travel is included in the price
About Navenby
Navenby is about 6 miles south-east of North Hykeham, in Lincolnshire. Jobs in Navenby are booked in like any other job: a fixed quote from photos, then a visit to do the work. We cover all 732 towns and villages in Lincolnshire, from the larger towns to small villages. Our nearest city page is Leeds, about 64 miles away.
We cover every part of LN5 and the streets around it. From High Street, Overton Close and Chapel Lane or a nearby road, a technician can come to you. Nearby, we also work in Boothby Graffoe (1 mile north), Coleby (2 miles north-west), Harmston (3 miles north), Waddington (5 miles north) and Hykeham (6 miles north-west). Further out, we also cover Lincoln (8 miles north), Grantham (14 miles south), Sleaford (9 miles south-east), North Hykeham (6 miles north-west), Birchwood (8 miles north-west) and Woodhall Spa (13 miles east).
Local landmarks in Navenby
Typical jobs here are in homes near The Lion And Royal Public House, Church of St Peter and Navenby Church of England Primary School, among other places. Nearby you will also find Mrs Smith's Cottage (less than half a mile north-west).
Other services in Navenby
What a repair cannot fix
A repair is not always the answer, and we’ll tell you before we start. Repairs won’t solve:
- Damage hidden under a previous coating, until it’s stripped back
- A poorly supported acrylic bath, until it’s firmed up
- Steel that has corroded right through
Not sure? Send pictures and we’ll give you a straight answer.
Materials we repair
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Acrylic baths
Can I fix it myself?
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Navenby: your questions answered
How long does re-enamelling take?
Generally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.
Can I add another job to the visit?
Yes, and it’s often cheaper. Send pictures of everything together and we’ll quote them together.
How do I book?
Photos of the damage, a photo of the whole bath and your postcode. After that, we just agree a date.
Do you work for landlords and businesses?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Navenby.
How durable is a resurfaced bath?
Care for it and it lasts. Avoid abrasive cleaners and suction mats.
Can I get a quote without a visit?
In nearly every case. If pictures do not show enough, we will ask for another angle.
Can you do the outside of a roll-top?
Yes. Inside and out.
About our accreditations · Every repair comes with a one-year guarantee.
