Derbyshire · England
Bath Re-enamelling in New Barlborough
Fixed-price bath re-enamelling in New Barlborough and the surrounding area, usually in one visit and guaranteed for a year.
- Resurfacing from £350
- Lots of chips and rust spots
- A coating lifting around the plughole
Bath re-enamelling in New Barlborough without replacing anything
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. Whether it’s a bath that stays dull however much you clean it and an old resurfacing that’s failing, we can help.
All our work comes with our one-year guarantee.
- Where
- New Barlborough (S43)
- County
- Derbyshire
- Cover
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Landlords, agents and businesses in New Barlborough
For anyone letting property in or around New Barlborough, we’ll quote for several properties at once. Send photos for each one and we will come back with a combined price.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Prices and what affects them
Resurfacing from £350. There are no hourly rates or hidden extras. The price is based on:
- The colour and finish to match
- How many items we do on one visit
- Whether it’s a chip, crack, burn or wear
- How much damage there is
The price reflects the work involved, not your postcode. The full price is agreed before booking.
Send photos for a quote
A couple of clear pictures is all it takes. It helps if you send:
- Any earlier repairs or coatings
- A coin beside the damage so we can judge size
- Good light, ideally daylight, without flash glare
- The postcode, so we can plan the visit
Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you will get a fixed quote back. Quotes are free and you are under no obligation.
What your bath is made of matters
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Where we work around New Barlborough
New Barlborough is about 3 miles north-east of Staveley, in Derbyshire. Our technicians come to clients in New Barlborough, so there’s no workshop to go to. We cover 532 places across Derbyshire, from the larger towns to small villages. Our nearest city page is Leeds, about 38 miles away.
Our visits in S43 work the same way as everywhere else we cover. From New Road, Manor Road and High Street or anywhere nearby, we can come to you. With the A616 close by, New Barlborough is simple for us to get to. If you’re just outside New Barlborough, we cover Barlborough (1 mile south-east), Clowne (2 miles south-east), Stanfree (2 miles south), Oxcroft (2 miles south) and Whitwell Common (2 miles east). Larger places within reach include Chesterfield (7 miles south-west), Dronfield (8 miles west), Bolsover (4 miles south), Staveley (3 miles south-west), Matlock (15 miles south-west) and Clay Cross (10 miles south-west).
What’s near New Barlborough
Locally, our jobs take us to homes close to Barlborough Primary School, Church of St James and Barlborough Hall School and the streets around them. Nearby too are The Apollo pub (less than half a mile north) and Heritage Mathematics & Computing Specialist School (1.1 miles south-east). The nearest railway station is Creswell station, about 3.5 miles south-east of the centre. Other landmarks nearby include Bolsover Hospital (3.9 miles south) and Creswell Crags Museum and Heritage Centre (3.8 miles east).
Questions from New Barlborough
Can you repair something that’s been repaired before?
Most of the time. Let us know what was used before.
Will there be fumes?
Some odour is normal while we spray, which is why we ventilate the bathroom. It fades as the coating cures.
Is there a call-out fee?
No. Our quotes include travel, and we charge the same wherever you are.
Do you work for landlords and businesses?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.
What does bath re-enamelling cost?
Prices start from £350. We give a fixed quote based on pictures of the damage. Send a close-up and a picture of the whole item with your S43 postcode.
Is there any odour?
It depends on the job, but often a little. Ventilation keeps it to a minimum, and it soon fades.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Is a repair better than a new one?
Normally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.
Nearby places to New Barlborough
What else we do in New Barlborough
What we can’t put right
Before you book, it’s worth knowing the limits too:
- A metal bath with a through crack
- Anything hidden under an old coating, until we remove it
- Leaking taps or wastes (a plumber’s job)
Not sure? Send pictures and we will give you a straight answer before you book.
Surfaces we repair
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
Aftercare tips
Nothing complicated is needed:
- Keep suction mats out of the bath
- Respect the curing time we give you
- Wipe the bath dry after use in hard water areas
- Don’t leave bottles, razors or sponges standing on the surface
A quick rinse and wipe after use helps, particularly where water is hard, so limescale can’t build up.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
How it works
Your technician turns up when we said we would and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. The work itself takes a full day, and the room is left clean and tidy.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Keep pets and children out of the room while we work
- Tell us about any previous repairs or coatings
- Let us know about parking or access
Getting a price
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Advice
Common problems we fix in New Barlborough
Many baths we resurface have simply been well used, and only the surface is worn. The body of the bath is generally perfectly sound.
Look out for any of the following:
- Worn patches where water runs and sits
- Stains that will not shift
- A coloured bath you want in white
- A bath that stays dull however much you clean it
Questions to ask before booking
- How to look after the finish
- When it can be used again
- If travel is included in the price
- What the guarantee covers, and for how long
About our accreditations · Every repair comes with a one-year guarantee.
