Powys · Wales
Bath re-enamelling & resurfacing in New Mills, Powys
Full bath re-enamelling and resurfacing for homes and businesses in New Mills and across Powys. Free, fixed quotes from your pictures.
- Resurfacing from £350
- Lots of chips and rust spots
- Brown or grey marks that don’t clean off
New Mills: your questions answered
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Do you cover New Mills?
Yes, we do. We send a technician to New Mills for every job, with no extra charge for travel.
Is the work guaranteed?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
Can pets and children be at home?
On the day, the room should be kept clear of pets and children.
Do you cover the entire of Powys?
Across the UK, and that includes New Mills. Prices do not change with location.
Can you make a coloured bath white?
Yes, most people go for white. Mention the colour you want when you send pictures.
What if the damage is worse than the pictures show?
Your quote covers the damage in the pictures. Anything extra is discussed before we begin.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
About our bath re-enamelling in New Mills
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. We work on acrylic baths, basins & shower trays and cast iron baths, and the jobs we see most are lots of chips and rust spots and an original cast iron bath that needs restoring.
We stand behind the work with a one-year guarantee, so you are covered after the visit.
- Location
- New Mills (SY22)
- Region
- Powys
- Guarantee
- One year on every repair
- Price
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
When we’d advise against a repair
To be straight with you, some problems need a different fix:
- Damage hidden under a previous coating, until it’s stripped back
- A bath split right through the body
- Leaking taps or wastes (a plumber’s job)
Send us photos and we will tell you honestly before you book.
Surfaces we repair
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Acrylic baths
Aftercare tips
To keep it looking its best for years:
- Get any chip repaired quickly
- Do not use the bath until it has fully cured
- Repair dripping taps early
- Keep suction mats out of the bath
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and don’t leave bottles or razors standing on the surface.
On a worn bath, rust spots keep spreading. Resurfacing before they spread keeps it simpler.
Covering New Mills
New Mills is about 12 miles south-west of Oswestry, in Powys. Jobs in New Mills are booked in like any other job: a fixed price from your photos, then a visit to do the work. Our repair technicians cover all 234 towns and villages across Powys. Our nearest city page is Liverpool, about 47 miles away.
Our repair technicians cover all of the SY22 postcode area and the streets around it. If you’re just outside New Mills, we cover Llanfyllin (1 mile east), Bachie Ganol (1 mile south-east), Peniarth (3 miles south-east), Bwlch-y-cibau (3 miles south-east) and Gwern (4 miles east). We also work in nearby towns such as Y Trallwng (10 miles south-east), Bron-y-Buckley (9 miles south-east), Cegidfa (8 miles south-east), Montgomery (15 miles south-east), Llanfair Caereinion (8 miles south) and Four Crosses (9 miles east).
What’s near New Mills
Typical jobs here are in homes near Llanfyllin High School, Ysgol Llanfyllin and The Old New Inn. Other local landmarks include Llanfyllin C.P. School (1 mile south-east) and St Myllin's Church (0.7 miles east). Well-known places in the area include Cefn Gaer (under half a mile south). Open spaces near New Mills include Cefn Llwyni.
Repair or replace in New Mills?
Replacing a bath normally involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Resurfacing from £350, with every job priced individually. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.
Why New Mills clients choose us
- Free fixed quotes from pictures
- One-year guarantee on every repair
- Colours mixed by hand to suit your surface
- Rooms protected and left tidy
Take a look at our full price list and guide to resurfacing and replacement costs.
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.
Do you need bath re-enamelling in New Mills?
Enamel does not fail overnight. Abrasive cleaners, limescale and years of use dull the surface, normally first under the taps and around the waste.
Common reasons people in New Mills contact us are:
- Stains that will not shift
- An original cast iron bath that needs restoring
- A peeling or bubbling previous coating
- Wear marks under the taps
What to look for in a quote
- What protection goes down before work starts
- Whether the colour is mixed to match
- Whether there are any call-out or travel charges
- Is the price fixed, and does it include VAT?
For landlords and businesses
We work for landlords, letting agents and housing providers in New Mills as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
For anyone letting property in or around New Mills, we’ll quote for several properties at once. Just send photos for each address and we will price them together.
Places near New Mills
What else we do in New Mills
What affects the price in New Mills
Prices start from £350. We charge the same across the UK, including New Mills. What changes the price is:
- How easy the damage is to reach
- What kind of damage it is
- Any earlier repairs that need removing first
- How hard the colour is to match
Compared with replacing, repairing usually costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Quotes from your pictures
Good photos mean an accurate price. Here’s what helps:
- Details of any past repairs
- Natural light rather than flash
- Where you are, by postcode
- A photo taken from further back
A quote takes minutes to ask for: photograph the damage, then the whole bath, add your postcode and send them over. You’ll get a fixed quote, not an estimate.
The process
A typical visit goes like this: we arrive on time, sheet and mask the area around the job, carry out the work and tidy away. Plan for a full day. Before leaving, we tell you how long to leave it and what to avoid for the first few days.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Have a window or extractor fan available
- Mention if the room is upstairs or in a flat
- Move bottles, mats and clutter away from the area
How to get a price
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
